A Study on the Sound Characteristic of Insulation and Manufacturing of Lightweight Concrete for Wall System

벽체용 경량 콘크리트의 제조 및 흡차음 특성에 관한 연구

  • Published : 2006.03.30

Abstract

This paper deals with the experimental for manufacturing the lightweight buildng materials with portland cement, fly ash, slag, lime, gypsum, and aluminum powder system. Aluminum powder was added an aerating agent. Specific gravity range of lightweight concrete specimens were 0.6~0.9g/cm3. These specimens properties studied by means of specific gravity, compressive strength, absorption coefficient, transmission loss and scanning electron microscopy. Cellular concrete with maximum compressive strength was 41kgf/cm2 by obtained Al=0.05wt.%. Moreover, the aeration lightweight concrete showed excellent sound absorption properties.

Keywords

References

  1. 崔相紇. 오희갑. 지정식. 엄태선., 1997. "無水石膏-高爐Slag界의 水和反應", Journal of Korean Ceramic Society, Vol. 17, No. 4, P. 217 -222 https://doi.org/10.1016/S0955-2219(96)00171-9
  2. Dan Tapan Kumar., 1985, "Activation of India Blast Furnace Slag by Lime and Lime Gypsum Mixed Activator in Solution Phase", India J. Technical-Slakes Lime Cement, Chatterjee, Manas Kumar, P. 337-344
  3. Paul Wencil Brown., 1987, "Early Hydration of Tetracalcium Alumino ferrite in Gypsum and Lime-Gypsum Solution", Am. Ceram. Soc., Vol. 70, No. 7, P. 493-496 https://doi.org/10.1111/j.1151-2916.1987.tb05682.x
  4. 鄭日榮., 1997, "氣泡濟.發泡劑 및 鑛物質 混和材" 韓國Concrete 學會 Concrete 混和材料, P. 112-247
  5. Jung-Soo Lim., 1993, "An Experimental Study on the Development and Engineering Properties of Lightweight Aerated Concrete", P. 7-10