한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제16권7호
  • /
  • Pages.720-728
  • /
  • 2006
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

다구찌 방법을 사용한 구조물의 손상 평가

Damage Assessment of Structures Using Taguchi Method

  • 권계시 (순천향대학교 기계공학과)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A robust damage assessment technique is presented such that the location and severity of damage in structures can be identified using measured modal data. In order to identify the damage efficiently, the concept of design of experiment using orthogonal array is used for screening the main effects of each parameter which corresponds to possible damage location in FE model. Then, Taguchi method, which has been widely used for robust design in industry, is applied to parameter updating in analytical FE model. The numerical simulations of a truss structure show that damages in structure can be located from updated parameters.

키워드

참고문헌

  1. Doebling, S. W., Farra, C. R., Prime, M. B. and Shevitz, D. W., 1996, 'Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in Their Vibration Characteristics: a Literature Review' , Los Alamos National Laboratory Report, LA-13070-MS
  2. Friswell, M. I. and Penny, J. E. T, 1997, 'Is Damage Location Using Vibration Measurement Practical', EUROMECH 365 International Workshop: DAMAS97 , Structural Damage Assessment using Advanced Signal Processing Procedures, Sheffield, UK
  3. Friswell, M. I. and Mottershead, J. E., 1995, 'Finite Element Model Updating in Structural Dynamics' , Kluwer Academic Publishers
  4. Xia, Y., 2001, 'Condition Assessment of Structures Using Dynamic Data', Nanyang Technological University, Ph.D thesis
  5. Jung, H. S. and Park, Y. J., 2004, 'Model Updating Using the Closed-loop Natural Frequency' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 14, No. 9, pp. 801 - 810 https://doi.org/10.5050/KSNVN.2004.14.9.801
  6. Friswell, M. I., Penny, J. E. T. and Garvey, S. D., 1997, 'Parameter Subset Selection in Damage Location', Inverse Problem in Engineering, Vol. 5, No. 3, pp. 189 - 215 https://doi.org/10.1080/174159797088027660
  7. Mares, C. and Surace, C., 1996, 'An Application of Genetic Algorithms to Identify Damage in Elastic Structures' , Journal of Sound and Vibration, Vol. 195, No. 2, pp. 195 - 215 https://doi.org/10.1006/jsvi.1996.0416
  8. Ruotolo, R. and Surace, C., 1997, 'Damage Assessment of Multiple Cracked Beams: Numerical Results and Experimental Validation' , Journal of Sound and Vibration, Vol. 206, No. 4, pp. 567 - 588 https://doi.org/10.1006/jsvi.1997.1109
  9. Friswell, M. I., Penny, J. E. T. and Garvey, S.D., 1998, A Combined Genetic and Eigensensitivity Algorithm for the Location of Damage in Structures' , Computers and Structures 69, pp. 547-556 https://doi.org/10.1016/S0045-7949(98)00125-4
  10. Worden, K., 1997, 'Structural Fault Detection Using a Novelty Measure' , Journal of Sound and Vibration, Vol. 201, No. 1, pp. 85 - 101 https://doi.org/10.1006/jsvi.1996.0747
  11. Chang, C. C. Chang, T. Y. P., Xu, Y. G. and To, W. M., 2002, 'Selection of Training Samples for Model Updating Using Neural Networks', Journal of Sound and Vibration, Vol. 249, No. 5, pp. 867 - 883 https://doi.org/10.1006/jsvi.2001.3915
  12. Taguchi, G., 1986, 'Introduction to Quality Engineering' , Asian Productivity Organization
  13. Park, S. H., 1996, 'Robust Design and Analysis for Quality Engineering' , Chapman & Hall
  14. Phadke M. S., 1989, 'Quality Engineering Using Robust Design' , Prentice Hall
  15. Kim, C. H., 1993, 'Development of Computer - aided Robust Design (CARD) Technique Using Taguchi Method' , KAIST Master Thesis
  16. Hedayat, A. S., Soloane, N. J. A. and Stufken, J., 1999, 'Orthogonal Arrays-theory and Applications' , Springer-Verlag
  17. Sloane, N. J. A., 2006, Website: http://www.research.att.com/~njas/oadir /index.html. A Library of Orthogonal Array