Journal of Mechanical Science and Technology

  • 제20권8호
  • /
  • Pages.1275-1283
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Condensation Heat Transfer Correlation for Smooth Tubes in Annular Flow Regime

  • Han Dong-Hyouck (Research Institute of Engineering & Technology, Korea University) ;
  • Moon C. (Department of Mechanical Engineering, Korea University) ;
  • Park C. (Central District Office, National Institute of Scientific Investigation) ;
  • Lee Kyu-Jung (Department of Mechanical Engineering, Korea University)
  • 발행 : 2006.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Condensation heat transfer coefficients in a 7.92 mm inside diameter copper smooth tube were obtained experimentally for R22, R134a, and R410A. Working conditions were in the range of $30-40^{\circ}C$ condensation temperature, $95-410 kg/m^2s$ mass flux, and 0.15-0.85 vapor quality. The experimental data were compared with the eight existing correlations for an annular flow regime. Based on the heat-momentum analogy, a condensation heat transfer coefficients correlation for the annular flow regime was developed. The Breber et al. flow regime map was used to discern flow pattern and the Muller-Steinhagen & Heck pressure drop correlation was used for the term of the proposed correlation. The proposed correlation provided the best predicted performance compared to the eight existing correlations and its root mean square deviation was less than 8.7%.

키워드

참고문헌

  1. Akers, W. W., Deans, H. A. and Crosser, O. K., 1959, 'Condensing Heat Transfer Within Horizontal Tubes,' Proc. Symp. Series Chem. Eng., Vol. 55, pp. 171-176
  2. Baroczy, C. J., 1966, 'A Systematic Correlation for Two-Phase Pressure Drop,' Chemical Engineering Progress Symposium Series, 62, pp. 232-249
  3. Breber, G., Palen, J. W. and Taborek, J., 1980, 'Prediction of Horizontal Tube Side Condensation of Pure Components Using Flow regime Criteria,' J. Heat Transfer, Vol. 102, pp.471-476 https://doi.org/10.1115/1.3244325
  4. Cavallini, A. and Zecchin, R., 1974, 'A Dimensionless Correlation for the Heat Transfer in Forced Convective Condensation,' Proc. 5th Int. Heat Transfer Conference, Vol. 3, pp. 309-313
  5. Cavallini, A., Censi, G., Del Col, D., Doretti, L., Longo, G. A. and Rossetto, L., 2001, 'Experimental Investigation on Condensation Heat Transfer and Pressure Drop of new HFC Refrigerants (R134a, R125, R32, R410A, R236ea) in a Horizontal Smooth Tube,' Int. J. of Refrigeration, Vol. 24, pp.73-87 https://doi.org/10.1016/S0140-7007(00)00070-0
  6. Dobson, M. K. and Chato, J. C., 1998, 'Condensation in Smooth Horizontal Tubes,' J. Heat Transfer, Vol. 120, pp. 193-213 https://doi.org/10.1115/1.2830043
  7. Fujii, T., 1995, 'Enhancement to Condensing Heat Transfer-New Developments,' J. Enhanced Heat Transfer, Vol. 2, pp. 127-138 https://doi.org/10.1615/JEnhHeatTransf.v2.i1-2.140
  8. Han, D. and Lee, K. J., 2005, Experimental Study on Condensation Heat Transfer Enhancement and Pressure Drop Penalty Factors in four Microfin Tubes,' Int. J. of Heat and Mass Transfer, Vol. 48, No. 18, pp. 3804-3816 https://doi.org/10.1016/j.ijheatmasstransfer.2005.02.041
  9. Jung, D., Cho, Y. and Park, K., 2004, 'Flow Condensation Heat Transfer Coefficients of R22, R134a, R407C, and R410A Inside Plain and Microfin Tubes,' Int. J. of Refrigeration, Vol. 27, pp.25-32 https://doi.org/10.1016/S0140-7007(03)00122-1
  10. Kays, W. M. and Crawford, M. E. 1993, Convective Heat and Mass Transfer, chap. 13, McGrawHill, New York
  11. Kosky, P. G. and Staub, F. W., 1971, 'Local Condensing Heat Transfer Coefficients in the Annular Flow Regime,' AIChE J., Vol. 17
  12. Koyama, S., Joodong, L. and Ryuuichirou, Y., 2004, 'An Investigation on Void Fraction of Vapor-Liquid Two-Phase Flow for Smooth and Microfin Tubes with Rl34a at Adiabatic Condition,' Int. J. of Multiphase Flow, Vol. 30, No.3, pp.291-310 https://doi.org/10.1016/j.ijmultiphaseflow.2003.10.009
  13. Miiller-Steinhagen, H. and Heck, K., 1986, 'A Simple Friction Pressure Drop Correlation for Two-Phase Flow in Pipes,' Chem Eng Process, Vol. 20, pp. 297-308 https://doi.org/10.1016/0255-2701(86)80008-3
  14. Quid Didi, M. B., Kattan, N. and Thome, J. R., 2002, 'Prediction of Two-Phase Pressure Gradients of Refrigerants in Horizontal Tubes,' Int. J. of Refrigeration, Vol. 25, pp. 935-947 https://doi.org/10.1016/S0140-7007(01)00099-8
  15. Shah, M. M., 1979, 'A General Correlation for Heat Transfer During Film Condensation Inside Pipes,' Int. J. of Heat and Mass Transfer, Vol. 22, pp. 547-556 https://doi.org/10.1016/0017-9310(79)90058-9
  16. Smit, F. J., Thome, J. R. and Meyer, J. P., 2002, Heat Transfer Coefficients During Condensation of the Zeotropic Refrigerant Mixture HCFC22/HCFC-142b,' J. Heat Transfer, Vol. 124, pp.1137-1146 https://doi.org/10.1115/1.1484108
  17. Tandon, T. N., Varma, H. K. and Gupta, C. P., 1995, 'Heat Transfer During Forced Convection Condensation Inside Horizontal Tube,' Int. J. Refrigeration, Vol. 18, pp.210-214 https://doi.org/10.1016/0140-7007(95)90316-R
  18. Traviss, D. P., Rohsenow, W. M. and Baron, A. B., 1972, 'Forced Convection Condensation Inside Tubes: A Heat Transfer Equation for Condenser Design,' ASHRAE Trans., Vol. 79, pp.157-165