대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제43권5호
  • /
  • Pages.550-559
  • /
  • 2006
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

종모양 분포 변환함수를 이용한 선형최적화 기법에 관한 연구

Hull Form Optimization by Modification Function of Bell-shaped Distribution

  • 최희종 (한국해양연구원 해양시스템안전연구소) ;
  • 김희정 (부산대학교 조선해양공학과) ;
  • 전호환 (부산대학교 조선해양공학과) ;
  • 정광효 (부산대학교 조선해양공학과)
  • Choi, Hee-Jong (Maritime and Ocean Engineering Research Institute, KOROI) ;
  • Kim, Hee-Jung (Dept. of Naval Arch. & Ocean Eng., Pusan National University) ;
  • Chun, Ho-Hwan (Dept. of Naval Arch. & Ocean Eng., Pusan National University) ;
  • Jung, Kwang-Hyo (Dept. of Naval Arch. & Ocean Eng., Pusan National University)
  • 발행 : 2006.10.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A design procedure for a ship with minimum total resistance was developed using a numerical optimization method called SQP(Sequential Quadratic Programming) and a CFD technique based on the Rankine source panel method with the nonlinear free surface boundary conditions. During the whole optimization process the geometry of the hull shape was represented based on the NURBS(Non-uniform rational B-spline) technique and the modification of the hull shape was controlled using the Bell-shaped distribution function to keep the fairness of the hull shape before and after the hull modification. The numerical analysis was carried out using 4000TEU container ship in the towing tank facility installed in the Pusan national university to know the validity of the developed algorithm for this study. As the results of the numerical analysis it proved that the resistance of the optimized hull is conspicuously reduced in comparison with the original hull in a wave-making resistance point of view.

키워드

참고문헌

  1. 김희정, 전호환, 1999, '비선형 최적화 기법을 이용한 2차원 지면효과익의 형상설계,' 대한조선학회 논문집, 제 36권, 제 3호, pp. 50-59
  2. 김희정, 전호환, 2000, '비선형 최적화 기법에 의한 최소 조파저항 선형 생성,' 대한조선학회 논문집, 제 37권, 제 4호, pp. 11-18
  3. 최희종, 서광철, 김방은, 전호환, 2003, '최소조파 저항을 가지는 컨테이너선의 선형최적화기법에 관한 연구,' 대한조선학회 논문집, 제 40권, 제 4호, pp. 8-15
  4. 최희종, 전호환, 2001, '트렌섬선미를 가지는 선형의 포텐셜 유동해석,' 한국해양공학회지, 제 15권, 제 1호, pp. 1-6
  5. 최희종, 정석호, 전호환, 2004, '최적선형개발에 대한 기초연구,' 한국해양공학회지, 제 18권, 제 3호, pp. 32-39
  6. Choi, H.J., Kim, M.C. and Chun, H.H., 2005, 'Development of an Optimal Hull Form with Minimum Resistance in Still Water,' Journal of SOTECH, Vol. 9, No.3, pp. 1-13
  7. Daniele, P., Michele, R. and Emilio, F.C., 2001, 'Design Optimization of Ship Hulls via CFD Techniques,' Journal of Ship Research, Vol. 45, No.2, pp. 140-149
  8. Day, A.H. and Doctors, L.J., 1997, 'Resistance Optimization of Displacement Vessels on the Basis of Pricipal Parameters,' Journal of Ship Research, Vol. 41, No.4, pp. 249-259
  9. Hino, T., Kodama, Y. and Hirata, N., 1998, 'Hydrodynamic Shape Optimization of Ship Hull Forms Using CFD,' Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow And Hull Form Design, pp. 533-541
  10. Holtrop, I.J., 1984, 'A Statistical Re-analysis of Resistance and Propulsion Data,' International Ship-Building Progress, Vol. 31, pp. 272-276
  11. Janson, C. and Larsson, L., 1996, 'A Method for the Optimization of Ship Hulls from Resistance Point of View,' Proc. 21st Symp. Naval Hydrodynamics, pp. 680-696
  12. Raven, H.C., 1996, 'A Solution Method for the Nonlinear Ship Wave Resistance Problem,' Doctor's Thesis, Delft Univ. Techn., Delft. Netherlands
  13. Tahara, Y., Himeno, Y. and Tsukahara, T., 1998, 'An Application of Computational Fluid Dynamics to Tanker Hull Form Optimization Problem,' Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow And Hull Form Design, pp, 515-531
  14. Vanderplaats, G.N., 1984, Numerical Optimization Techniques for Engineering Designs, McGraw-Hill, New York