Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

3D Digital Mockup Application of Cryogenic Butterfly Valve, LNG Carrier

DMU(Digital Mockup) 기법을 적용한 LNG 선박용 극저온 버터플라이 밸브 설계의 우수성 검증

  • Lee, Dong-Hun (Dept. of Naval Architecture and Ocean Engineering, Pusan University) ;
  • Kim, Duck-Eun (Dept. of Naval Architecture and Ocean Engineering, Pusan University) ;
  • Kim, Soo-Young (Dept. of Naval Architecture and Ocean Engineering, Pusan University) ;
  • Park, Gy-Young (Ace-valve company)
  • 이동훈 (부산대학교 조선해양공학과) ;
  • 김덕은 (부산대학교 조선해양공학과) ;
  • 김수영 (부산대학교 조선해양공학과) ;
  • 박기영 (㈜ 에이스 브이)
  • Published : 2006.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, cryogenic butterfly valves for LNG carriers are actively developed by ship equipment companies. The dual core structure unlike usual butterfly valve has both translation and gyration motions of the disk of the valve assembly. Especially, the ship equipment companies can not have overcome 2D design method; in addition, even though 2 years of development has passed, the drawing cannot be secured. In this research, for the cryogenic butterfly valves and the product design, 3D design method was introduced and DMU(Digital Mockup) was applied to complement the problems in 2D design and investigate application possibility of 3D design method.

Keywords

References

  1. 구윤회, 2005 '이동식 2중 편심 버터플라이 밸브 개발,' 산업자원부 LNG Cargo Valve 연구회, pp. 5-7, 100-111
  2. 문두환, 2002, The State-of-the-Art and R&D Perspectives on VR for Automobile Design, 'CS788 인간과 컴퓨터 상호작용,' 특강 과제 최종보고서, pp. 7,15,16
  3. 우종훈, 이광국, 정호림, 권영대, 신종계, 2005, '디지털 조선소 구축을 위한 물류 모델 프레임워크,' 대한조선학회 논문집, 제 42권, 제 2호, pp. 165-174 https://doi.org/10.3744/SNAK.2005.42.2.165
  4. 이강수, 이상헌, 2003, 'PDM 시스템에서 운용되는 DMU 시스템 개발,' 한국 CAD/CAM 학회 논문집, 제 8권, 제 3호, pp. 157-166
  5. 정호림, 임현준, 이장현, 최양렬, 김호구, 신종계, 2005, '디지털 매뉴팩쳐링 기법을 이용한 절단기기의 검증된 가상 NC 시뮬레이션 구축,' 대한조선학회 논문집, 제 42권, 제1호, pp. 64-72 https://doi.org/10.3744/SNAK.2005.42.1.064
  6. Gomes, A. and Zachmann, G., 1998, 'Integrating Virtual Reality for Virtual Prototyping,' Proceedings of 1998 ASME Design Engineering Technical Conferences, DETC98/CIE-5536