DOI QR코드

DOI QR Code

A Study on the Control Technology of Ozone Generations

오존 발생량 제어기술에 관한 연구

  • 조국희 (한국전기연구원 전기물리그룹) ;
  • 조문수 (한국전기연구원 산업전기연구단 전기물리 연구그룹)
  • Published : 2006.12.31

Abstract

Ozone concentration and flow rate of discharge tube were measured using LabVIEW program in data acquisition part and it was saved. In addition, quantities of ozone generation was adjusted by the collected data, which was performed at control part. Therefore, energy efficiency was improved by suppling quantities of ozone generation according to environmental conditions.

기존의 오존 발생 시스템과 차별화하기 위해 연속적으로 오존 농도 발생 특성을 분석하여 오존발생량을 실시간으로 제어가 가능하도록 하였다. 파이렉스 방전관의 수집부에서는 랩뷰 프로그램을 사용하여 방전관의 오존 농도 및 유량을 측정하여 저장한다. 그리고 조절부에서는 정리된 데이터를 이용해 오존 발생량을 조절한다. 따라서 오존 발생량을 환경에 따라 투입하여 에너지 효율을 증가시키고자 하였다.

Keywords

References

  1. Yukiharu Nomoto et al., 'Improvement of Ozone Yield by a Silent-Surface Hybrid Discharge Ozonizer', IEEE 1995, Transactions on industry applications, Vol. 31, No. 6, pp. 1458 - 1462, November/December, 1995 https://doi.org/10.1109/28.475741
  2. Moo Been Chang, 'Experimental Study on Ozone Synthesis via Dielectric Barrier Discharges', Ozone Science and Engineering, Vol. 19, pp. 241-254, 1997 https://doi.org/10.1080/01919519708547304
  3. R. Feng, G.S.P. Castle, S. Jayaram, 'Automated system for power Measurement in the silent discharge', IEEE Transactions on Industry Applications, Vol. 34, No. 3, pp. 563 - 570, 1998 https://doi.org/10.1109/28.673727