Simulation of Noise and Vibration around the Improved Turnout System

개량분기기 인근의 소음진동 시뮬레이션

  • 엄기영 (한국철도기술연구원 기존철도기술개발사업단 인프라기술개발팀) ;
  • 엄주환 (한국철도기술연구원 기존철도기술개발사업단 인프라기술개발팀) ;
  • 이진형 (한국철도기술연구원 기존철도기술개발사업단 인프라기술개발팀)
  • Published : 2006.12.30

Abstract

A turnout system which permits trains to pass from one track to another is a combination of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. A turnout is the sole moving part among the railway components and has complex configuration, so the safety has always been raised an issue. In Korea, it is planned to adopt the high speed tilting train, which operates at the maximum speed of 200km/h, at conventional lines by the year of 2010. However, for the application of the tilting train to conventional lines, it is prerequisite to establish a stable turnout system allowing the tilting train to pass through it without reducing speed. Therefore, the improved turnout system for the speed-up of conventional lines has been developed and the prototype of the turnout system has been constructed. In this study, simulation of noise and vibration around the improved turnout system was performed in order to predict the generation level of noise and vibration due to passing of the tilting train through the turnout system.

철도운행에 있어 분기기는 열차를 주행선로에서 이웃한 선로로 이동시키는 매우 중요한 역할을 수행하는 장치로써 포인트부, 리드부 그리고 크로싱부로 이루어져 있다. 그러나 분기기는 레일 주변설비 중 유일한 가동부로 구조도 복잡하고 천이과정 중 차륜, 레일간의 급격한 운동변화가 필연적으로 발생되어 안전성 문제가 항상 거론되고 있다. 실제로, 국내외에서 차량의 탈선사고가 빈번히 발생되는 취약부위이기도 하다. 또한 차량, 궤도, 통신 그리고 전기 분야 등 분기기는 각각 다른 기능을 수행하는 매우 복잡한 장치들의 조합 시스템이므로 각각의 단위 개체들의 최적화만으로는 분기기의 전반적 성능을 향상시키기는 힘들며 이들에 대한 통합 기술의 확보가 필수적이다. 우리나라 철도는 기존선의 최고운행속도를 200km/h까지 향상 시키는 장기계획을 수립하고, 곡선부가 많은 우리나라 지형에 적합한 최고운행속도 180km/h의 틸팅열차를 개발 중이다. 그러나, 기존선로에 틸팅열차를 적용하기 위해서는 속고의 저감없이 틸팅열차를 통과시킬 수 있는 안정적인 분기기시스템의 확립이 선행되어야 한다. 본 연구에서는 틸팅열차 통과 시 기존선 속도향상을 위해 개발된 개량분기기 주변의 소음진동 정도를 예측하기 위해 시뮬레이션을 실시하였다.

Keywords