우르시올을 첨가한 자동차 시트용 항균 폴리우레탄 발포체 개발

Development of Antimicrobial Polyurethane Foam for Automotive Seat Modified by Urushiol

  • 발행 : 2006.09.01

초록

천연 옻 나무에서 추출되는 항균물질 우르시올을 폴리우레탄 발포체 성형 시스템에 도입하여 항균 폴리우레탄 발포체를 제조하였다. 항균물질 우르시올 첨가량을 증가시키는 경우 발포체 성형 반응성이 약간 저하되는 것이 관찰되었으나 기계적 물성 측면에서는 항균물질 미처리 발포체와 비교하여 큰 물성저하는 관찰되지 않았다. 반면 항균성 측면에서는 항균물질 미처리 발포체에 비하여 초기 균수 대비 균수의 성장성이 감소되는 것을 확인할 수 있었다.

New antibacterial Polyurethane foams for car seat with Urushiol extracted from a natural lacquer were prepared. Influences of antibacterial agent's concentration on the reactivity with isocyanate and the mechanical properties of foams were investigated. It was observed that the urethane formation reaction was delayed a little when the amount of Urushiol was increased. However, the foams made using Urushiol showed similar property to the neat polyurethane foam. In terms of antibacterial property, the foams prepared with Urushiol showed better performance than the neat polyurethane foam.

키워드

참고문헌

  1. J. W. Leenslag, E. Huygens, and A. Tan, Cellular Polymers, 16, 411 (2000)
  2. J. W. Hartings and J. H. Hagan, J. Cell. Plast., March/April, 81 (1997)
  3. G. R. Blair, A. R. Wilson, and R. J. horn, SAE Technical Paper No.960512 (1996)
  4. Y. Gu, SAE Technical Paper No.980555 (1998)
  5. M. R. Kinkelaar, Am. Ind. Hyg. Assoc. J., 57, 837 (1996) https://doi.org/10.1080/15428119691014521
  6. S. Doi, Toyota R&D Reviews, 30, 3 (1999)
  7. G. R. Blair, R. S. Miliojevich, and J. D. Van Heuman, SAE Technical Paper No.980656 (1998)
  8. W. Shen and A. M. Vertiz, SAE Technical Paper No.970597 (1997)
  9. G. S. Paddan and M. J. Griffin, Ergonomics, 37, 1513 (1994) https://doi.org/10.1080/00140139408964931
  10. K. Ebe and M. J. Griffin, Ergonomics, 43, 771 (1994) https://doi.org/10.1080/001401300404742
  11. S. Tanigaki and K. Kaneko, JSAE Paper, No.9535981 (1995)
  12. B. Czupryski and J. Liszkowska, J. Appl. Polym. Sci., 100, 2020 (2006) https://doi.org/10.1002/app.22604
  13. M. Zeng and L. Zhang, J. Appl. Polym. Sci., 100, 708 (2006) https://doi.org/10.1002/app.23421
  14. P. Laity and J. Taylor, J. Appl. Polym. Sci., 100, 779 (2006) https://doi.org/10.1002/app.22644
  15. R. Narayan, D. Chattopadhyay, and B. Sreedhar, J. Appl. Polym. Sci., 99, 368 (2006) https://doi.org/10.1002/app.22430
  16. Y. Wei, F. Cheng, H. Li, and J. Yu, J. Appl. Polym. Sci., 92, 351 (2004) https://doi.org/10.1002/app.20023
  17. M. Semsarzadeh and A. Navarchian, J. Appl. Polym. Sci., 90, 963 (2003) https://doi.org/10.1002/app.12691
  18. I. Rhoney, S. Brown, N. Nicholas, and A. Pethrick, J. Appl. Polym. Sci., 91, 1335 (2004) https://doi.org/10.1002/app.13302
  19. Y. Inoue, Bacteriacide & Fungicide for a Comfortable Environment, CMC, New York, 1992
  20. G. Woods, The ICI Polyurethane Handbook, Wiley, New York, 1990
  21. G. Oertel, Polyurethane Handbook, Hanser, New York, 1993
  22. D. Klempner and K. Frisch, Handbook of Polymeric Foams and Foam Technology, Oxford Univ. Press, New York, 1991