DOI QR코드

DOI QR Code

Resistance of Alkali Activated Slag Cement Mortar to Sulfuric Acid Attack

알칼리 활성화 슬래그 시멘트 모르타르의 내황산성

  • Min, Kyung-San (Department of Material Science & Engineering, Kunsan National University) ;
  • Lee, Seung-Heun (Department of Material Science & Engineering, Kunsan National University)
  • 민경산 (군산대학교 신소재공학) ;
  • 이승헌 (군산대학교 신소재공학)
  • Published : 2007.11.30

Abstract

The setting time of alkali activated slag cement tends to be much faster than ordinary Portland cement, and its compressive strength had been higher from the 1 day but became lower than that of the cement on the 28 days. According to the results of the surface observation, weight loss, compressed strength, and erosion depth tests on the sulphuric acid solution. It has been drawn that alkali activated slag cement has a higher sulphate resistance than ordinary Portland cement, and in particular, the alkali activated slag cement added 5 wt% alumina cement has little deterioration on the sulphuric acid solution. The reason why the alkali activated slag cement has higher sulphate resistance than other hardened cement pastes is that it has no $Ca(OH)_2$ reactive to sulphate ion, and there is little $CaSO_4{\cdot}2H_2O$ production causing volume expansion, unlike other pastes. And it is supposed that $Al(OH)_3$ hydrates with high sulphate resistance, which is produced by adding the alumina cement increases the sulfate resistance.

Keywords

References

  1. H. M. Song, H. K. Hwang, and J. I. Choa, 'Properties of Concrete Pipe by Biochemical Corrosion and Performance Deterioration in Domestic,' J. Kor. Concrete Institute., 18 [2] 16-21 (2006)
  2. W. J. Lee, 'The Corrosion Appearance of Mortar by The Sulfuric Acid,' J. Kor. Concrete Institute., 43-8 (2002)
  3. T. Bakharev, J. G. Sanjayan, and Y.-B. Cheng, 'Resistance of Alkali Activated Slag Concrete to Carbonation,' Cement and Concrete Research., 31 1277-83 (2001) https://doi.org/10.1016/S0008-8846(01)00574-9
  4. T. Bakharev, 'Resistance of Geopolymer Materials to Acid Attack,' Cement and Concrete Research., 35 658-70 (2005) https://doi.org/10.1016/j.cemconres.2004.06.005
  5. T. Bakharev, J. G. Sanjayan, and Y.-B. Cheng, 'Sulfate Attack on Alkali Activated Slag Concrete,' Cement and Concrete Research., 32 211-16 (2002) https://doi.org/10.1016/S0008-8846(01)00659-7
  6. T. Bakharev, J. G. Sanjayan, and Y.-B. Cheng, 'Resistance of Alkali Activated Slag Concrete to Acid Attack,' Cement and Concrete Research., 33 1607-11 (2003) https://doi.org/10.1016/S0008-8846(03)00125-X
  7. D. Krizan and B. Zivanovic, 'Effects of Dosage and Modulus of Water Glass on Early Hydration of Alkali Slag Cement,' Cement and Concrete Research, 32 1181-88 (2002) https://doi.org/10.1016/S0008-8846(01)00717-7
  8. C. T. Song and M. Daimon, 'Hydration of Granulated Blast Furnace Slag in the Presence of NaOH(in Korean),' J. Kor. Ceram. Soc., 17 [3] 61-6 (1980)
  9. S. Nagaoka, 'Sulphate Resisting and Heat Resisting Cement,' Cement and Concrete, 535 71-8 (1991)
  10. Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes, C 267-97

Cited by

  1. Basic Properties of Alkali-activated Mortar With Additive's Ratio and Type of Superplasticizer vol.3, pp.1, 2015, https://doi.org/10.14190/JRCR.2015.3.1.050