DOI QR코드

DOI QR Code

PERFORMANCE EVALUATION OF NEW SPACER GRID SHAPES FOR PWRS

  • Published : 2007.12.31

Abstract

A spacer grid, which is one of the most important structural components in a PWR fuel assembly, supports its fuel rods laterally and vertically. Based on in-house design experience, scrutiny of the design features of advanced nuclear fuels and the patents of other spacer grids, KAERI has devised its own spacer grid shapes and acquired patents. In this study, a performance evaluation of KAERI's spacer grid shapes was carried out from mechanical/structural and thermohydraulic view points. A comparative performance evaluation of commercial spacer grid shapes was also carried out. The comparisons addressed the spring characteristics, fuel rod vibration characteristics, fretting wear resistance, impact strength characteristics, CHF enhancement, and the pressure drop level of the spacer grid shapes. The results show that the performances of KAERI's spacer grid shapes are as good as or better than those of the commercial spacer grid shapes.

Keywords

References

  1. Billerey A., 'Evolution of Fuel Rod Support under Irradiation-Impact on the Mechanical Behavior of Fuel Assemblies,' IAEA TCM on Fuel Assembly Structural Behavior, Cadarache France, 2004
  2. T.H. Chun, D.S. Oh, W.K. In, K.N. Song, H.K. Kim, H.S. Kang, K.H Yoon, and Y.H. Jung, 'Spacer Grid with Hybrid Flow Mixing Device for Nuclear Fuel Assembly,' US Patent 6,845,138 B2, 2005
  3. T.H. Chun, D.S. Oh, W.K. In, K.N. Song, H.K. Kim, H.S. Kang, K.H Yoon, and Y.H. Jung, 'Spacer Grid with Hybrid Flow Mixing Device for Nuclear Fuel Assembly,' Japan Patent 3463998, 2003
  4. T.H. Chun, D.S. Oh, W.K. In, K.N. Song, H.K. Kim, H.S. Kang, K.H Yoon, and Y.H. Jung, 'Spacer Grid with Hybrid Flow Mixing Device for Nuclear Fuel Assembly,' ROK Patent 0423738, 2004
  5. K.H. Yoon, K.N. Song, T.H. Chun, D.S. Oh, W.K. In, H.K. Kim, H.S. Kang, and Y.H. Jung, 'Spacer Grid for Nuclear Fuel Assemblies with Grid Springs Maintaining Conformal Contact with Fuel Rods and Enlarged Elastic Range,' US Patent US 6707872 B2, 2004
  6. K.H. Yoon, K.N. Song, T.H. Chun, D.S. Oh, W.K. In, H.K. Kim, H.S. Kang, and Y.H. Jung, 'Spacer Grid with H-spring for Fuel Rods for Use in Nuclear Reactor Fuel Assemblies,' US Patent US 6167105, 2000
  7. H.S. Kang, K.N. Song, K.H. Yoon, T.H. Chun, D.S. Oh, W.K. In, H.K. Kim, and Y.H. Jung, 'Side-slotted Nozzle type Double Sheet Spacer Grid for Nuclear Fuel Assemblies,' US Patent US 6744843 B2, 2004
  8. H.S. Kang, K.N. Song, K.H. Yoon, T.H. Chun, D.S. Oh, W.K. In, H.K. Kim, and Y.H. Jung, 'Grid with Nozzletype Coolant Deflecting Channels for Use in Nuclear Reactor Fuel Assemblies,' US Patent US 6130927, 2000
  9. K.N. Song, K.H. Yoon, and D.H. Kim, 'Shape Optimization of Spacer Grid Springs to Support Nuclear Fuel Rods,' ICONE11-36500, Tokyo, Japan, April 20-23, 2002
  10. S.H. Lee, J.Y. Kim, and K.N. Song, 'Design Improvement of an OPT-H Type Nuclear Fuel Rod Support Grid by Using an Axiomatic Design and an Optimization,' Journal of Mechanical Science and Technology, Vol. 21 (2007), pp.1191-1195 https://doi.org/10.1007/BF03179035
  11. J. F. Archard, 'Contact and Rubbing of Flat Surface,' Journal of Applied Physics, Vol. 24, No. 8
  12. Frick et al., 'Overview on the Development and Implement of Methodologies to Compute Vibration and Wear of Steam Generator Tubes,' Symposium on Flow Induced Vibration: Vol. 3, Vibration in Heat Exchanger, 1984, 149-161
  13. Y. H. Lee et al., 'A study on the Evaluation Parameter of Sliding/Impact Wear in a High Temperature and Pressure Water Condition,' Proceedings of KSTLE Fall Meeting (in Korean), 2004
  14. Y. H. Lee et al., 'Analysis of Worn Area Characteristic in the Fretting Wear of Nuclear Fuel Rod,' Proceedings of KSME Fall Meeting (in Korean), 2004
  15. C. H. Shin, C. H., Choo, Y. J., Youn, Y. J., Moon, S. K., and T. H. Chun, 'CHF Performance of Hybrid Mixing Vane Grid (I),' Proceedings of KNS Spring Meeting, 2006
  16. D. S. Oh, T. H. Chun, K. N. Song, S. K Chang, B. D. Kim, and S. Y. Chun, 'Pressure Drop Test of Hybrid Mixing Vane Spacer Grid on 5x5 Fuel Rod Bundle,' KAERI/TR-3223/2006, Korea Atomic Energy Research Institute (2006)
  17. K. N. Song and S. S. Kim, 'Determination of Optimum Welding Parameters on the Laser Welded Spacer Grid Assembly for PWRs,' 4th International Congress on Laser Advanced Materials Processing, HPL-04, Kyoto, Japan, May 16-18, 2004
  18. K. N. Song et al., 'Performance and Welding Quality Analysis for the Zircaloy Spacer Grid Assembly of PWR Fuel,' Proceedings of KWS Fall Meeting (in Korean), 2007

Cited by

  1. Weld bead formation and corrosion behavior of pulsed laser welded zirconium alloy vol.77, pp.1-4, 2015, https://doi.org/10.1007/s00170-014-6474-3
  2. Numerical investigations on the effect of pit on two-step dimple forming of atomic fuel spacer grid pp.1433-3015, 2018, https://doi.org/10.1007/s00170-017-0908-7