DOI QR코드

DOI QR Code

전단 지간의 변화에 따른 PSC 거더용 강-콘크리트 합성 바닥판의 역학적 거동

Behavior of Steel-Concrete Composite Decks for PSC Girder Bridge with Various Shear Span Lengths

  • 김태협 (성균관대학교 토목환경공학과) ;
  • 박준명 (성균관대학교 토목환경공학과) ;
  • 홍성남 (성균관대학교 토목환경공학과) ;
  • 박선규 (성균관대학교 토목환경공학과) ;
  • 김형렬 (한국건설기술연구원 구조연구부)
  • Kim, Tae-Hyup (Dept. of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Park, Jun-Myung (Dept. of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Hong, Sung-Nam (Dept. of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Park, Sun-Kyu (Dept. of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Kim, Hyeong-Yeol (Structure Research Dept., Korea Institute of Construction Technology)
  • 발행 : 2007.06.30

초록

최근에 교량과 건축물의 건설에 강-콘크리트 합성 구조물이 광범위하게 적용되고 있다. 본 논문에서는 과거의 현장 타설 철근콘크리트 바닥판을 대체하기 위하여 새로운 형태의 강-콘크리트 합성 바닥판을 재안하였다. 유공판재형 전단 연결재는 성형 강판과 콘크리트 사이의 수평전단저항력을 제공하는데 유용하였다. 제안된 바닥판 시스템의 효과를 증명하기 위하여 PSC 거더용 바닥판을 8개 제작하였으며, 정적 하중 상태에서 바닥판의 수평전단저항력을 결정하기 위하여 4가지의 전단 지간을 적용하여 실험을 수행하였다. 또한 제안된 바닥판과의 비교를 위하여 2개의 철근콘크리트 바닥판을 제작하여 실험을 수행하였다. 그리고 제안된 바닥판 시스템의 수평전단저항력은 m-k 방법을 이용하여 산정되었다.

Recently, steel-concrete composite structures are widely used in bridge and building constructions. In this paper, a new type of steel-concrete composite deck with profiled steel sheeting is proposed to replace the conventional cast-in-place reinforced concrete deck. Perfobond rib shear connectors were utilized to provide horizontal shear resistance between the profiled sheeting and the concrete. To validate the effectiveness of the proposed deck system, 8 full-scale deck specimens for PSC girder bridge were fabricated. The specimens were tested with four different shear span lengths to determine the horizontal shear resistance of the deck under a static monotonic loading. For comparison purpose, two reinforced concrete decks were also fabricated and tested. The horizontal shear resistance of the proposed deck system was calculated using the m-k method.

키워드

참고문헌

  1. 김형열, 김정호, 정연주 '장수명 합리화 바닥판 개발 / 강콘크리트 합성 바닥판', No.2005-057, 한국건설기술연구원, 2005, pp.2-3
  2. Veljkovic, M., 'Influence of Load Arrangement on Composite Slab Behavior and Recommendation for Design', Journal of Constructional Steel Research, Vol.45, No.2, 1998, pp.149-178 https://doi.org/10.1016/S0143-974X(97)00055-2
  3. 김진호, 김동규, 이명재, 김규동, 김덕재, 윤병호, 문태섭, 허충, 김규식, '합성용 데크플레이트를 이용한 합성 슬 래브의 구조적 거동에 관한 연구', 한국강구조학회논문집, 8권 2호, 1996, pp.273-282
  4. 박종건, '전단지간비에 따른 철큰콘크리트 보의 전단강 도 특성에 관한 연구', 한국구조물진단학회, 4권 1호, 2000, pp.93-100
  5. Eurocode 4, Design of Steel-Concrete Composite Structure, ENV-1994-1-1, European Committee for Standardization, 2002, pp.148-152
  6. Zellner W., 'Recent Designs of Composite Bridges and a New Type of Shear Connectors Composite Construction in Steel and Concrete', Proceedings of an Engineering Foundation Conference, New England College, Henniker, New Hampshire, 1987, pp.240-252
  7. Hyeong-Yeol Kim and Youn-Ju Jeong, 'Experimental Investigation on Behaviour of Steel-Concrete Composite Bridge Decks with Perfobond Ribs', Journal of Construe-tional Steel Research, Vol.62, No.5, 2006, pp.463-471 https://doi.org/10.1016/j.jcsr.2005.08.010
  8. James G MacGregor., Reinforced Concrete Mechanics and Design, Prentice-Hall, Inc. New Jersey, 1999, pp.180-195