DOI QR코드

DOI QR Code

An Experimental Investigation of Jet Impingement Cooling Using the Vortex Tube

보텍스튜브를 이용한 충돌냉각의 실험적 연구

  • 신운철 (단국대학교 대학원 기계공학과) ;
  • 김창수 (경북대학교 대학원 기계공학과) ;
  • 배신철 (단국대학교 기계공학과)
  • Published : 2007.01.01

Abstract

The jet impingement cooling characteristics are investigated experimentally. The study is motivated by the potential application of local hot spot cooling by means of the vortex tube. The purposes of this research are to examine the effect of the nozzle-block spacing and flow rate. The results of jet through vortex tube is compared with ones of circular Jet. Flow visualization by the smoke-wire technique is also performed to investigate the flow structure. As the nozzle-block spacing is increased and flow rate decreased, the cooling effect of the Jet through the vortex tube decreases mere remarkably than that of the circular jet. So the cooling effect for the jet through the vortex tube is higher than that for the circular jet at $H/D{\leq}3$, $Q{\geq}10m^3/h$.

Keywords

References

  1. Huang, L. and El-genk, M. S., 1997, 'Heat Transfer and Flow Visualization Experiments of Swirling, Multi-Channel and Convectional Impinging Jets,' Int. Journal of Heat and Mass Transfer, Vol. 41, pp. 583-600 https://doi.org/10.1016/S0017-9310(97)00123-3
  2. Lee, S. J. and Cho, J. W., 2001, 'Experimental Study on Heat Transfer Characteristics of Swirling Impinging Jet,' Trans. of the KSME (B), Vol. 25, No. 10, pp. 1346-1354
  3. Cho, C. I., 2001, 'Impinging Cooling by Means of the Cold Exit of Vortex Tube on Heated Plate,' MS thesis, Kyungpook National University, daegu, Korea
  4. Frohlingsdrof, W. and Unger, H., 1998, 'Numerical Investigations for the Compressible Flow and the Energy Separation in the Ranque-Hilsch Vortex Tube,' Int. Journal of Heat and Mass Transfer, Vol. 42, pp. 415-422 https://doi.org/10.1016/S0017-9310(98)00191-4
  5. Takahama and Kawashima, K. I., 1966, 'An Experimental Study of Vortex Tube,' Bulletin of JSME, Vol. 9, No. 33, pp. 227-245