Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

An Extremely Low Temperature Properties of Austenite Stainless Steels

오스테나이트 스테인리스강의 극저온 특성

  • Published : 2007.01.27
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of immersion time in the liquid nitrogen and deformation-induced martensitic transformation on the behavior of austenite stainless steels used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing of immersion time in the liquid nitrogen, the tensile strength of all austenite stainless steels at cryogenic temperature was increased because the martensite transformation of unstable austenite. The restraint of crack generation ana transmission also increased the tensile strength by the active ${\alpha}'$ transformation. The elongation decreasing of 321 steel is not the mechanical deformation of austenite phase but the stress induced martensite phase during the tensile test.

Keywords

References

  1. S. K. Kim, C. W. Jang, J. H. Lee, C. H. Jung, Y. G. Seo and C. G. Kang, Kor. J. Mater. Res., 16(8), 516 (2006) https://doi.org/10.3740/MRSK.2006.16.8.516
  2. T. Nakamura, M. Tominaga, H. Murase and Y. Nishiyama, Testu-to-Hagane, 69, 471 (1982)
  3. K. Hoshino and K. Mukai, Testu-to-Hagane, 69, 631 (1983)
  4. G. Baudrt and A. Pineau, Mater. Sci. and Eng., A28, 229 (1977) https://doi.org/10.1016/0025-5416(77)90176-8
  5. H. Suto and H. Kaga, J. Jpan. Inst. Metal, 37, 1158 (1973)
  6. G. R. Chanani, S. D. Antolovich and W. W. Gerberich, Metall. Trans., 3A, 2661 (1972) https://doi.org/10.1007/BF02644242
  7. C. Bathias and R. M. Pelloux, Metall. Trans., 4A, 1265 (1973) https://doi.org/10.1007/BF02644521
  8. S. D. Antolovich and B. Singh, Metall. Trans., 2A, 2135 (1971)
  9. A. G. Pineau and R. K. Pelloux, Met. Trans., 5,1103 (1974) https://doi.org/10.1007/BF02644322
  10. E. Fukushima, A. Goto, M. Ito and M. Fushimi, J. Jpan. Inst. Metal, 36, 605 (1972)
  11. H. Izumi, H. Sunada and G. Shinoda, J. Jpan Soc. Strength & Fracture Meter., 14, 173 (1979)
  12. G. R. Chanani and S. D. Antolovich, Metall. Trans., 5A, 217 (1974)
  13. K. Tsuzaki, E. Nakanishi, T. Maki and I. Tamura, Trans. ISIJ, 23, 834 (1983) https://doi.org/10.2355/isijinternational1966.23.834
  14. D. Hennessy, G. Steckel and C. Altstetter, Metall Trans., 7A, 415 (1976) https://doi.org/10.1007/BF02642838
  15. K. Mukai, K. Hosino and T. Fujioka, Testu-to Hagane, 65, 1756 (1979)
  16. T. Udoguchi, K. Kasahara, M. Kitagawa, T. Tsunenari, T. lchihara and N. Sakamoto, Pressure Eng. Japan, 19, 169 (1981)
  17. Do-Yeal Ryoo, Soo-Chan Lee, Yong-Deuk Lee and JungYoon Kang, J. Kor. Inst. Met. & Meter., 39(12), 1391-1391 (2001)
  18. H. M. Lee, G W. Bahng, J. J. Lee, J. K. Han and R. P. Reed, J. Kor. Inst. Met. & Meter., 28(7), 567-573 (1990)
  19. T. Ogata, K. Ishikawa, R. P. Walsh, Adv. Cryo. Eng., 34, 233 (1988)
  20. H. M. Lee, S. H. Nahm, Y. H. Huh, J. J. Lee and G. W. Bahng, J. Kor. Inst. Met. & Meter., 28(11), 970-976 (1990)
  21. ASTM Standard E 8 : Annual Book of ASTM Standards, ASTM, 03. 01, p.130, Philadelphia, USA, (1984)
  22. W. G. Dobson and D. L. Johnson, Adv. Cryo. Eng., 30, 185 (1984)
  23. R. P. Reed, Adv. Cryo. Eng., 7, 448 (1961)
  24. D. T. Read and R. L. Tobler, Adv. Cryo. Eng., 28, 17 (1982)
  25. M. C. Juhas, D. B. Duncan and R. D. Streit, Cryogenics, 23, 603 (1983) https://doi.org/10.1016/0011-2275(83)90034-6