New Bidirectional ZVS PWM Sepic/Zeta DC-DC Converter

새로운 양방향 ZVS PWM Sepic/Zeta DC-DC 컨버터

  • 김인동 (부경대학교 전기.제어공학부) ;
  • 팽성환 (삼성중공업 기술연구소) ;
  • 박성대 (부경대학교 전기공학과) ;
  • 노의철 (부경대학교 전기.제어공학부) ;
  • 안진우 (경성대학교 전기전자메카트로닉스공학부)
  • Published : 2007.02.01

Abstract

Bidirectional DC-DC converters allow transfer of power between two dc sources, in either direction. Due to their ability to reverse the direction of flow of power, Dey are being increasingly used in many applications such as battery charge/dischargers, do uninterruptible power supplies, electrical vehicle motor drives, aerospace power systems, telecom power supplies, etc. This Paper Proposes a new bidirectional Sepic/Zeta converter. It has low switching loss and low conduction loss due to auxiliary communicated circuit and synchronous rectifier operation, respectively Because of positive and buck/boost-like DC voltage transfer function(M=D/1-D), the proposed converter is very desirable for use in distributed power system. The proposed converter also has both transformer-less version and transformer one.

Keywords

References

  1. M. Jain, M. Daniele, and P. K Jain, 'A Bidirectional DC-DC Converter Topology for Low Power Application', IEEE Trans. Power Electronics, vol. 15, no. 4, pp. 595-606, July 2000 https://doi.org/10.1109/63.849029
  2. F. Z. Peng, H. Li, G.J. Su, and J.S. Lawler, 'A New ZVS Bidirectional DC-DC Converter for Fuel Cell and Battery Application', IEEE Trans. Power Electronics, vol. 19, no. 1, pp. 54-65, Jan 2004 https://doi.org/10.1109/TPEL.2003.820550
  3. K-W. Ma, and Y. S. Lee, 'A Novel Uninterruptible dc-dc Converter for UPS Applications', IEEE Trans. Industry Applications vol. IA-28, no. 4, pp. 808-815, July/Aug. 1992
  4. D. M. Sable, F. C. Lee, and B. H. Cho, 'A Zero-Voltage-Switching Bidirectional Battery Charger / Discharger for the NASA EOS Satellite', IEEE APEC Rec., 1992, pp. 614-621
  5. F. Caricchi, F. Crescimbini, and A. Di Napoli, '20kW Water-Cooled Prototype of a Buck-Boost Bidirectional DC-DC Converter Topology for Electrical Vehicle Motor Drives', IEEE APEC Rec., 1995, pp. 887-892
  6. B. Ray, 'Single-Cycle Resonant Bidirectional DC/DC Power Conversion', IEEE APEC Rec., 1993, pp. 44-50
  7. J. Maio, L. Martinez, A. Poveda, L. Vicuna, F. Guinjoan, A. Sanchez, M. Valentin, and J. Marpinard, 'Large-Signal Feedback Control of a Bidirectional Coupled-Inductor Cuk Converter,' IEEE Trans. Industrial Electronics vol. 39, no. 5, pp. 429-436, Oct. 1992 https://doi.org/10.1109/41.161474
  8. G. Chen, Y. -So Lee, S. Y. R. Hui, D. Xu and Y. Wang, 'Actively Clamped Bidirectional Flyback Converter', IEEE Trans. Industrial Electronics vol. 47, no. 4, pp. 770-779, Aug. 2000 https://doi.org/10.1109/41.857957
  9. L. Zhu, 'A Novel Soft-Commutating Isolated Boost Full-Bridge ZVS-PWM DC-DC Converter for Bidirectional High Power Applications,' IEEE Trans. Power Electronics, vol. 21, no: 2, pp. 422-429, March 2006 https://doi.org/10.1109/TPEL.2005.869730
  10. G. Spiazzi and L. Rossetto, 'High-Quality Rectifier Based on Coupled-Inductor Sepic Topology', IEEE PESC Rec., 1998, pp. 336-341
  11. D. S. L. Simonetti, J. Sebastian, and J. Uceda, 'The Discontinuous Conduction Mode Sepic and Cuk Power Factor Preregulators: Analysis and Design,' IEEE Trans. Industrial Electronics, vol. 44, no. 5, pp. 630-637, Oct. 1997 https://doi.org/10.1109/41.633459
  12. J. J. Jozwick and M. K Kazimierczuk, 'Dual Sepic PWM Switching-Mode DC/DC Power Converter', IEEE Trans. on Industrial Electronics, vol. 36, no. 1, pp.64-70, Feb. 1989 https://doi.org/10.1109/41.20346
  13. R. W. De Doncker and J. P. Lyons, 'The Auxiliary Resonant Commutated Pole Converter', IEEE lAS Rec., 1990, pp. 1228-1235