References
- U.S. Nuclear Regulatory Commission, 1989, 'Generic Letter 89-10 Safety-Related Motor Operated Valve Testing and Surveillance.'
- EPRI, 1990, 'Application Guide for Motor Operated Valves in Nuclear Power Plants,' EPRI-NP-6660D, pp. 1-1-11
- Kalsi, M.S., Alvarez, P.D., Wang, J.K. and Somogyi, D., 1996, 'An Improved Gate Valve for Critical Applications in Nuclear Power Plants,' Fourth NRC/ASME Symposium on Valve and Pump Testing, pp. 1B-55-56
- EPRI, 1998, 'Performance Prediction Metho-dology Implementation Guide,' TR-103244, pp. 1-1-7
- CRANE Inc., 1998, 'Universial Diagnostic System MOV Data Acquisition Software User's Manual,' pp. 1-3-10
- EPRI, Palo Alto, CA, 1994, 'Methods to Address Rate-of-Loading in Torque Switch-Controlled MOVs,' TR-103226, pp. 1-1-2-49
- Guerout, F. M., Pitard-Bouet, J.M. and Christophe Jouve, 2000, 'Selection of Greases for Motor-Operated Valve Stem/Stem Nut Lubrication,' Sixth NRC/ASME Symposium on Valve and Pump Testing, pp. 2B-52-53
- EPRI, 1988, 'Valve Stem Packing Improvements,' EPRI-NP-5697, pp. 3-1-28
- Garza, Ivo A., 1996, 'Evaluation of Existing EPRI and INEEL Test Data to Determine the Worm-to-Worn Gear Coefficient of Friction in Limitorque Actuators,' Fourth NRC/ASME Symposium on Valve and Pump Testing, pp. 1B-36-39
- Wang, J.K., Sharma, V. and Kalsi, M.S., 'Stem Thrust Prediciton Model for Westinghouse Wedge Gate Valves with Linkage Type Stem-to-Disk Connection,' Fourth NRC/ASME Symposium on Valve and Pump Testing, pp. 1B-77-81
- Kim, D.W. and Yoo, S.Y., 2005, 'A Method of ROL Improvement for the Motor Operated Gate Valve Operated in the High Differential Pressure Condition,' J. of KFMA, Vol. 8, No. 1, pp. 16-22 https://doi.org/10.5293/KFMA.2005.8.1.016
Cited by
- A Study on the Bounding Value of Valve Performance Parameters for Motor Operated Flexible Wedge Gate Valve vol.10, pp.5, 2007, https://doi.org/10.5293/KFMA.2007.10.5.046
- A Study on the Packing Friction Estimation of Power-Operated Valves in Nuclear Power Plants vol.37, pp.11, 2013, https://doi.org/10.3795/KSME-B.2013.37.11.1053