Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Li2ZrO3 Membrane and Evaluation on the Mechanical Properties Before and After CO2 Separation

Li2ZrO3 분리막의 제조와 이산화탄소 선택투과 전후의 기계적 특성 평가

  • Park, Sang-Hyun (School of Mechanical and Automotive Engineering, Kookmin University) ;
  • Lee, Shi-Woo (Energy Materials Research Center, Korea Institute of Energy Research) ;
  • Yu, Ji-Haeng (Energy Materials Research Center, Korea Institute of Energy Research) ;
  • Woo, Sang-Kuk (Energy Materials Research Center, Korea Institute of Energy Research) ;
  • Lee, Kee-Sung (School of Mechanical and Automotive Engineering, Kookmin University)
  • 박상현 (국민대학교 기계자동차공학부 기계설계) ;
  • 이시우 (한국에너지 기술연구원 에너지재료연구센터) ;
  • 유지행 (한국에너지 기술연구원 에너지재료연구센터) ;
  • 우상국 (한국에너지 기술연구원 에너지재료연구센터) ;
  • 이기성 (국민대학교 기계자동차공학부 기계설계)
  • Published : 2007.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we investigated $Li_2ZrO_3$ membrane as a candidate material for high-temperature $CO_2$ separation and evaluated mechanical property. $Li_2ZrO_3$ powder was synthesized by solid state reaction of $Li_2CO_3\;and\;ZrO_2$. Then we fabricated $Li_2ZrO_3$ tape using tape casting method. Dense $Li_2ZrO_3$ membrane prepared by sintering at $1600^{\circ}C$ for 2 h after pressing $Li_2ZrO_3$ tape using lamination machine. Mechanical properties before and after $CO_2$ absorption of fabricated $Li_2ZrO_3$ membrane such as Hertzian indentation, Victors hardness and 3-point bending testing were evaluated.

Keywords

References

  1. M. M. Dal-Cin, F. McLellan, C. N. Striez, C. M. Tam, T. A. Tweddle, and A. Kumar, 'Membrane Performance with a Pulp Mill Effluent: Relative Contributions of Fouling Mechanisms,' J. Membr. Sci., 120 [2] 273-285 (1996) https://doi.org/10.1016/0376-7388(96)00151-2
  2. J. N. Kuruzovich and P. R. Piergiovanni, 'Yeast Cell Microfiltration: Optimization of Backwashing for Delicate Membranes,' J. Membr. Sci., 112 [2] 241-47 (1996) https://doi.org/10.1016/0376-7388(95)00294-4
  3. N. Nabi, P. Aimar, and M. Meireles, 'Ultrafiltration of an Olive Oil Emulsion Stabilized by an Anionic Surfactant,' J. Membr. Sci., 166 [2] 177-88 (2000) https://doi.org/10.1016/S0376-7388(99)00264-1
  4. P. Stefanovich, H. W. T. Matthew, M. Toner, R. G. Tompkins, and M. L. Yarmush, 'Extracorporeal Plasma Perfusion of Cultured Hepatocytes: Effect of Intermittent Perfusion on Hepatocyte Function and Morphology,' J. Surg. Res., 66 57-63 (1996) https://doi.org/10.1006/jsre.1996.0372
  5. K. K. Chan and A. M. Brownstein, 'Ceramic Membranes- Growth Prospects and Opportunities,' Am. Ceram. Soc. Bull., 70 [4] 703-707 (1991)
  6. K. Nakagawa and T. Ohashi, 'A Novel Method of $CO_2$ Capture from High-Temperature Gases,' J. Electrochem. Soc., 45 [4] 1344-1346 (1998)
  7. B. N. Nair, T. Yamaguchi, H. Kawamura, S. I. Nakao, and K. Nakagawa, 'Processing of Lithium Zirconate for Applications in Carbon Dioxide Separation: Structure and Properties of the Powders,' J. Am. Ceram. Soc., 87 [1] 68-74 (2004) https://doi.org/10.1111/j.1551-2916.2004.00068.x
  8. J. Ida, R. Xiong, and Y. S. Lin, 'Synthesis and $CO_2$ Sorption Properties of Pure and Modified Lithium Zirconate,' Sep. Purif. Technol., 36 41-51 (2004) https://doi.org/10.1016/S1383-5866(03)00151-5
  9. J. Ida and Y. S. Lin, 'Mechanism of High-Temperature $CO_2$ Sorption on Lithium Zirconate,' Environ. Sci. Technol., 37 1999-2004 (2003) https://doi.org/10.1021/es0259032
  10. S. K. Woo, S. Lee, and J. H. Yu, 'Carbon Dioxide Sorption Properties and Sntering Vehavior of Lithium Zirconate Prepared by Soild-State Reaction(in Korean),' J. Kor. Ceram. Soc., 43 [5] 309-314 (2006) https://doi.org/10.4191/KCERS.2006.43.5.309
  11. R. Greenwood, E. Roncari, and C. Galassi, 'Preparation of Concentrated Aqueous Alumina Suspensions for Tape Casting,' J. Eur. Ceram. Soc., 17 1393-401 (1997) https://doi.org/10.1016/S0955-2219(97)00034-4
  12. B. J. Briscoe, G. L. Biundo, and N. Ozkan, 'Drying Kinetics of Water-Based Ceramic Suspensions for Tape Casting,' Ceram. Int., 24 [5] 347-57 (1998) https://doi.org/10.1016/S0272-8842(97)00021-7
  13. K. S. Lee, Y. W. Rhee, D. H. Blackburn, and B. R. Lawn, 'Cracking of Brittle Coatings Adhesively Bonded to Substrates of Unlike Modulus,' J. Mater. Res., 15 [8] 1653-1656 (2000) https://doi.org/10.1557/JMR.2000.0237
  14. J. H. Kim, P. Miranda, D. K. Kim, and B. R. Lawn, 'Effect of an Adhesive Interlayer on the Fracture of a Brittle Coating on a Supporting Substrate,' J. Mater. Res., 18 [1] 222-27 (2003) https://doi.org/10.1557/JMR.2003.0031
  15. N. E. Dowling, 'Mechanical Behavior of Materials,' pp. 152- 153, Prentice Hall, 1999
  16. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, 'A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements,' J. Am. Ceram. Soc., 64 [9] 533-538 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
  17. J. H. Ha, J. H. Kim, and D. K. Kim, 'Strength and Reliability of Porous Ceramics Measured by Sphere Indentation on Bilayer Structure(in Korean),' J. Kor. Ceram. Soc., 41 [7] 503-07 (2004) https://doi.org/10.4191/KCERS.2004.41.7.503
  18. J. Hedlund, J. Sterte, M. Anthonis, A. J. Bons, B. Carstensen, N. Corcoran, D. Cox, H. Deckman, W. D. Gijnst, P. P. de Moor, F. Lai, J. McHenry, W. Mortier, J. Reinoso, and J. Peters, 'High-Flux MFI Membranes,' Microporous and Mesoporous Materials, 52 179-189 (2002) https://doi.org/10.1016/S1387-1811(02)00316-5

Cited by

  1. Effect of Porous Substrate on the Strength of Asymmetric Structure vol.52, pp.6, 2015, https://doi.org/10.4191/kcers.2015.52.6.417