Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지

The Effect of Etching Time on the Biaxial Flexural Strength of IPS Empress® 2 Ceramic

불산 처리 시간이 IPS Empress® 2 세라믹의 2축 굴곡강도에 미치는 영향에 대한 연구

  • Kim, Youn-Hwi (Department of Prosthodontics, Graduate School, Dankook University) ;
  • Shin, Soo-Yeon (Department of Prosthodontics, Graduate School, Dankook University) ;
  • Cho, In-Ho (Department of Prosthodontics, Graduate School, Dankook University) ;
  • Lee, Joon-Seok (Department of Prosthodontics, Graduate School, Dankook University)
  • 김연휘 (단국대학교 치과대학 치과보철학 교실) ;
  • 신수연 (단국대학교 치과대학 치과보철학 교실) ;
  • 조인호 (단국대학교 치과대학 치과보철학 교실) ;
  • 이준석 (단국대학교 치과대학 치과보철학 교실)
  • Published : 2007.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Fluoric acid etching is an essential procedure in cementation of reinforced ceramics to tooth surface. But there have been few studies about the changes of surface structure and flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to the etching time. The objectives of this study were to examine the surface structure changes and the difference in biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to various etching times. Sixty one disk-shaped specimens of IPS $Empress^{(R)}$ 2 ceramic($14mm{\times}1.2mm$) were fabricated for the biaxial flexural strength test and SEM analysis according to the manufacturer's recommendations. Sixty specimens were divided into 6 groups(n=10) according to the time of HF acid etching(0, 20, 180 and 300s)and silane/resin cement application. Each disk was loaded using a piston-on-3 ball biaxial configuration in a universal testing machine. The failure loads(N) were recorded, and the biaxial flexural strength for each disk was calculated. A one-way analysis of variance and independent t-test on transformed fracture strength data were used to determine significant differences between groups. The groups of no cementation showed a trend toward progressive weakening with increasing the etching time. However, this was not statistically significant at p=0.05 level. The groups of resin cementation exhibited no apparent trend in their mean strength values. SEM photomicrographs showed very different results of etching. Within the conditions of this study, alteration of surface topography by acid etching does not have a deleterious effect on the biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic.

Keywords

References

  1. Rasetto FH, Driscoll CF, Prestipino V, Masri R, von Fraunhofer JA. Light transmission through all-ceramic dental materials: A pilot study. J Prosthet Dent 2004;91:441-6 https://doi.org/10.1016/j.prosdent.2004.02.019
  2. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N. The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems. J Prosthet Dent 2005;93:459- 66 https://doi.org/10.1016/j.prosdent.2005.02.012
  3. Christensen GJ. Porcelain-fused-to-metal vs. nonmetal crowns. J Am Dent Assoc 1999;130:409-11 https://doi.org/10.14219/jada.archive.1999.0211
  4. Sieber C. In the light of nature. Quintessence Dent Technol 1993;16:60-8
  5. Blatz MB. Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002;33:415-26
  6. Ferrari M, Cagidiaco MC, Vichi A, Mannocci F, Mason PN, Mjor IA. Bonding of all-porcelain crowns: structural characteristics of the substrate. Dent Mater 2001;17:156-64 https://doi.org/10.1016/S0109-5641(00)00059-2
  7. Cattell MJ, Chadwick TC, Knowles JC, Clarke RL, Lynch E. Flexural strength optimization of a leucite reinforced glass ceramic. Dent Mater 2001;17:21-33 https://doi.org/10.1016/S0109-5641(00)00046-4
  8. Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 2000;83:412-7 https://doi.org/10.1016/S0022-3913(00)70035-7
  9. Antonson SA, Anusavice KJ. Contrast ratio of veneering and core ceramics as a function of thickness. Int J Prosthodont 2001;14:316- 20
  10. Heffernan MJ, Aquilino SA, Diaz-Amold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9 https://doi.org/10.1067/mpr.2002.126794
  11. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002;88:10-5 https://doi.org/10.1067/mpr.2002.126795
  12. Cronin RJ, Cagna DR. An update on fixed prosthodontics. J Am Dent Assoc 1997;128:425-36 https://doi.org/10.14219/jada.archive.1997.0226
  13. Shareef MY, van Noort R, Messer PF. The effect of microstructural features on the biaxial flexural strength of leucite reinforced glass-ceramics. J Mater Sci Mater Med 1994;5:113-18 https://doi.org/10.1007/BF00121700
  14. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 1965;119 :251-67
  15. Jones DW. Development of dental ceramics. A historical perspective. Dent Clin North Am 1985;29:621-44
  16. Van Noort R. Introduction to dentalrnaterials. St, Louis: Mosby; 1994. :201-14
  17. Braga RR, Ballester RY, Daronch M. Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin. Dent Mater 2000;16:303-10 https://doi.org/10.1016/S0109-5641(00)00023-3
  18. Groten M, Probster L. The influence of different cementation modes on the fracture resistance of feldspathic ceramic crowns.Int J prosthodont 1997;10:169-77
  19. Spohr AM, Sobrinho LC, Consani S, Sinhoreti MA, Knowles JC.Influence of surface conditions and silane agent on the bond of resin to IPS Empress 2 ceramic. Int J Prosthodont 2003;16:277-82
  20. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994;72:355-9 https://doi.org/10.1016/0022-3913(94)90553-3
  21. Kato H, Matsumura H, Tanaka T, Atsuta M. Bond strength and durability of porcelain bonding systems. J Prosthet Dent 1996;75: 163-8 https://doi.org/10.1016/S0022-3913(96)90094-3
  22. Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res 1987;66:1460-5 https://doi.org/10.1177/00220345870660091001
  23. Holand W, Schweiger M, Frank M, Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res 2000;53: 297-303 https://doi.org/10.1002/1097-4636(2000)53:4<297::AID-JBM3>3.0.CO;2-G
  24. Kim KI, Choi KB, Ahn SG. Effect of etching time on shear bond strength of resin cements to reinforced all-ceramic crowns. J Korean Acad Prosthodont 2004;42:501-13
  25. Anonymous. Empress 2 Instruction for use. Ivoclar- Vivadent AG 2003
  26. Yen TW. Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic. J Prosthet Dent 1993;70:224-33 https://doi.org/10.1016/0022-3913(93)90056-T
  27. ASTM designation: F394-78. American standard test method for biaxial flexure strength (modulus of rupture) of ceramic substrates. Annualbook of ASTM standards. Philadelphia: American Society for Testing and Materials (re-approved 1984); 1978. p. 434-40
  28. Kirstein AF, Woolley RM. Symmetrical bending of thin circular elastic plates on equally spaced point supports. J Res Natl Inst Stand Technol 1967;71C: 1-10
  29. Shetty DK, Rosenfield AR, McGuire P, Bansal GK, Duckworth WH. Biaxial flexure tests for ceramics. Am Ceram Soc Bull 1980;59:1193-7
  30. Krejci I, Krejci D, Lutz F. Clinical evaluation of a new pressed glass ceramic inlay material over 1.5 years. Quintessens Int 1992;23:181-6
  31. Sorensen JA, Fanuscu MI, Choi C, Mito W. Status of clinical trial on Empress crown. J Dent Res 1995;74:159-62
  32. Tidehag P, Gunne J. A 2-year clinical follow-up study of IPS-Empress ceramic inlay. Int J Prosthodont 1995;8:456-60
  33. Roulet JF, Soderholm KIM, Longmate J. Effect of treatment and storage conditions on ceramic/ composite bond strength. J Dent Res1995;74:381-7 https://doi.org/10.1177/00220345950740011501
  34. Ozden AN, Akaltan F, Can G. Effect of surface treatments of porcelain on the shear bond strength of applied dual-cured cementJ Prosthet Dent 1994;72:85-8 https://doi.org/10.1016/0022-3913(94)90216-X
  35. Stewart GD, Jain P, Hodges J. Shear bond strength of resin cements to both ceramic and dentin. J Prosthet Dent 2002;88:277-84 https://doi.org/10.1067/mpr.2002.128034
  36. Saracoglu A, Cura C, Cotert HS. Effect of various surface treatment methods on the bond strength of the heat-pressed ceramic samples. J Oral RehabiL 2004;31:790-7 https://doi.org/10.1111/j.1365-2842.2004.01305.x
  37. Hofmann N, Handrejk A, Haller B, Klaiber B. The surface conditioning of pressed ceramics and its effect on the bond strength to composite[abstract]. Schweiz Monatsschr Zahnmed 1993;103:1415 -20
  38. Nakamoto H, Sugisawa H, Kawahara K, Takada H, Kaneko M, Nagamitsu Y, Kakehashi Y, Sato T, Igarashi T. Microstructure of etched 'IPS Empress' heat-pressed ceramics observed by SEM. J Nihon Univ Sch Dent. 1996;38:31-6 https://doi.org/10.2334/josnusd1959.38.31
  39. Chen JF, Matsumura H, Atsuta M. Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Operative Dent 1998;23:250-7
  40. Grossman DG, Nelson JW. The bonded Dicor crown [abstract]. J Dent Res 1987;66:206
  41. Kim JS, Hwan HS, Jeong CM, Jeon YC. A study on the bond strength of resin cements to Empress 2 ceramic. J Korean Acad Prosthodont 2001;39:184-96
  42. Cattell MJ, Knowles JC, Clarke RL, Lynch E. The biaxial flexural strength of two pressable ceramic systems. J Dent 1999;27:183-96 https://doi.org/10.1016/S0300-5712(98)00047-5
  43. Russel AG, Giordano II, Campbell S, Pober R. Flexural strength of feldspathic porcelain treated with ion exchange, overglaze, and polishing. J Prosthet Dent 1994;71:468-72 https://doi.org/10.1016/0022-3913(94)90184-8
  44. Jager N, Feilzer AJ, Davidson CL. The influence of surface roughness on porcelain strength. Dental Materials 2000;16:381-88 https://doi.org/10.1016/S0109-5641(00)00030-0
  45. Stephen F, Michael A, William M. A comparison of glazed and polished dental porcelain. In J Prosthodont 1989;2:524-9
  46. Baikova LG, Pukh VP, Pesina TI. Effect of chemical etching on the strength of undamaged glass. Soviet J Glass Phys Chem. 1983;9:452-6
  47. Piddock V, Marquis PM, Wilson HJ. The mechanical strength and microstructure of all-ceramic crowns. J Dent 1987;15:153-8 https://doi.org/10.1016/0300-5712(87)90141-2
  48. Jones DW. The strength and strengthening mechanisms of dental ceramics. McLean JW, ed. Dental ceramics. Proceedings of the First International Symposium on Ceramics. Chicago: Quintessence Pub; 1983:83-136
  49. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH. Strengthof a dental glass-ceramic after surface coating. Dent Mater 1993;9:274-9 https://doi.org/10.1016/0109-5641(93)90074-Z