참고문헌
- 정연규, 김한수 (2000) 연속유입 간헐포기공정 모델에서 계수 민감도 분석. 상하수도학회지. 16(2), pp.231-242
- 환경부 (2005) 환경백서 2005
- Abusam, A. and Keesman, K.J. (1999) Effect of number of CSTR's on the modelling of oxidation ditches: Steady state and dynamic analysis, Med. Fac. Landbouw. Univ. Gent, 64, pp. 91-94
- Abusam, A. Keesman, K.J., Stranten, G. Spanjers, H. and Meinema, K. (2001) Parameter estimation procedure for complesx non-linear systems: Calibration of ASM No. 1 for N-removal in a full-scale oxidation ditch, Water science and technoblgy, 43(7), pp. 357-365
- Anderson, J.S., Kim, Hyunook, McAvoy, T.J and Hao, O.J. (2000) Control of an alternation aerobic-anoxic activated sludge system- Part 1: development of a linearization-based modeling approach, Control engineering practice, 8, pp. 271-278 https://doi.org/10.1016/S0967-0661(99)00174-4
- Argaman, Y. (1995) A steady-state model for the single sludge activated sludge system I. Model description, Water Research, 29(1), pp, 137-145 https://doi.org/10.1016/0043-1354(94)E0115-M
- Chachuat, B., Roche, N. and Latifi, M.A. (2003) Reduction of the ASM 1 model for optimal control of small-size activated sludge treatment plants, Revue des Sciences de l'Eau, 16(1), pp. 5-26 https://doi.org/10.7202/705496ar
- Cho, J., Ahn, K.H., Seo,Y. and Lee, Y. (2003) Modification of ASM No.1 for a submerged membrane bioreactor system: Including the effects of soluble microbial products on membrane fouling, Water science and technology, 47(12), pp. 177-181
- Gujer, W. (2006) Activated sludge modelling: Past, present and future, Water science and technology, 53(3), pp. 111-119
- Hack, M. and Kohne, M. (1996) Estimation of wastewater process parameters using neural networks, Water science and tecbnology, 33(1), pp. 101-115
- Henze, M., Grady C.P., Jr., Gujer, W., Marais, G.V. and Matsuo, T. (1986) Activated sludge model no. 1, IAWQ Scientific and Technical Report, 1., IAWPRC, London, UK
- Kolisch, G. and Londong, G. (1998) An on-line simulation to support the operation of municipal sewage plants, Water science and technology, 38(3), pp. 71-78
- Langergraber, G., Rieger, L., Winkler, S., Alex, J., Wiese, J. and Owerdieck, C. (2004) A guideline for simulation studies of wastewater treatment plants, Water science and technology, 50(7), pp. 131-138
- Lukasse, L.J., Keesman, K.J., Klapwijk, A. and Van Straten, G. (1998) Optimal control of N-removal in ASPs, Water science and technology, 38(3), pp.255-262
- Veldhuizen, H.M., Loosdrecht, M.C. and Hijnen, J.J (1999) Modelling biological phosphorus and nitrogen removal in a full scale activated sludge process, Water Research, 33(16), pp. 3459-3468 https://doi.org/10.1016/S0043-1354(99)00064-0
- Weijers, S.R., Preisig, H.A. and Kok, J.J., Buunen, A., Wouda, T. W. (1996) Parameter identifiability and estimation of the IAWQ activated sludge model no. 1, Med. Fax, Landbouw. Univ. Gent, 61(4A), pp. 1809-1813
- Zhao, S.H., Isaacs, H.S. and Kummel, M. (1995) An analysis of nitrogen removal and control strategies in an alternating activated sludge process, Water Research, 29(2), pp. 535-544 https://doi.org/10.1016/0043-1354(94)00174-6