A Study on the Design of a New Rotor in Internal Pumps

내부 펌프의 새로운 로버 설계에 관한 연구

  • 장영준 (부산대학교 기계공학부) ;
  • 김재훈 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 한승무 (경희대학교 동서의료공학과) ;
  • 김철 (부산대학교 기계기술연구소)
  • Published : 2007.03.01

Abstract

A internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. The topic of this paper is the design of a new rotor, which is based on specific performance as different types depending on the shape of the lobe of the outer rotor. First, the design of internal lobe pumps with circular, elliptical, and their combined lobe profiles is considered. The latter is a new type of lobe profile with special shape whose curvature follows a definite function. Then we introduce the performance indexes used for the comparison. Some of these indexes, such as flow rate and flow rate irregularity, are commonly used for the comparison, while specific slipping is particularly suitable in this case. It is possible to notice that the circular and elliptical type is comparable to the circular one or the elliptical one in terms of flow rate irregularity, but has improved performance in terms of specific slipping. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.

Keywords

References

  1. Colbourne, J. R., 'Gear Shape and Theoretical Flow Rate in Internal Gear Pumps,' Transactions of the CSME, Vol. 3, No.4, pp. 215-223, 1975
  2. Saegusa, Y., Urashima, K., Sugimoto, M., Onoda, M. and Koiso, T., 'Development of Oil-Pump Rotors with a Trochoidal Tooth Shape,' SAE Paper, No. 840454
  3. Tsay, C. B. and Yu, C. Y., 'Mathematical Model for the Profile of Gerotor Pumps,' J. of CSME, Vol. 10, No. 1, pp. 41-47, 1989
  4. Yu, C. Y. and Tsay, C. B., 'The Mathematical Model of Gerotor Pump Applicable to Its Characteristic Study,' J. of CSME, Vol. 11, No. 4, pp. 385-391, 1990
  5. Lee, S. C. and Lee, S. N., 'Design and Analysis of Gerotor for Hydraulic Motors,' J. of KSTLE, Vol. 11, No. 2, pp. 63-70, 1995
  6. Kim, C. H., Kim, D. I., Ahn, H. S. and Chong, T. H., 'Analysis of Tooth Contact Stress of Gerotor Hydraulic Motors,' J. of KSTLE, Vol. 15, No. 2, pp. 164-170, 1999
  7. Kim, J. H. and Kim, C., 'Development of an Integrated System of Automated Design of Gerotor Oil Pump,' J. of The Korean society of precision engineering, Vol. 23, No. 2, pp. 88-96, 2006