DOI QR코드

DOI QR Code

A Wireless Identification System Using an Efficient Antenna Based on Passive Surface Acoustic Wave(SAW) Devices

  • Chang, Ki-Hun (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Lee, Woo-Sung (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Yoon, Young-Joong (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Jae-Kwon (Department of Electronic Engineering and Interdiscplinary Program of Integrated Biotechnology, Sogang University) ;
  • Park, Joo-Yong (Department of Electronic Engineering and Interdiscplinary Program of Integrated Biotechnology, Sogang University) ;
  • Burm, Jin-Wook (Department of Electronic Engineering and Interdiscplinary Program of Integrated Biotechnology, Sogang University)
  • Published : 2007.03.31

Abstract

A UHF band wireless identification system based on passive surface acoustic wave(SAW) devices is presented in this paper. SAW ID tags were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good electro-mechanical coupling property. To reduce degradation of the antenna performance associated with the piezoelectric materials, an efficient design of the SAW RFID antenna is introduced. By measuring the parameters of the SAW ID tag, the performance of the antenna was tested by experimentation.

Keywords

References

  1. Li Shujian, Ma Lin, and Wang Danzhi, 'A remote wireless identification system based on passive surface acoustic wave(SAW) devices', International Conference on Communications, Circuits and Systems 2005, vol. 2, May 2005
  2. C. S. Hartmann, 'A global SAW ID tag with a large data capacity', IEEE Ultrasonics Symposium 2002, vol. 1, pp. 65-69, Oct. 2002
  3. M. K. Fries, R. Vahldieck, and R. Peter, 'Low-cost patch antenna for passive microwave tagging systems', IEEE International Symposium on Antennas and Propagation 2003, vol. 2, pp. 692-695, Jun. 2003
  4. C. Hausleitner, R. Steindl, A. Pohl, and F. Seifert, 'Low-cost radio interrogation systems for passive SAW sensors and transponders', IEEE International Symposium on Applications of Ferroelectrics 2000, vol. 2, pp.847-850, Aug. 2000
  5. K. V. S. Rao, P. V. Nikitin, and S. F. Lam, 'Antenna design for UHF RFID tags: A a review and a practical application', IEEE Transactions on Antennas and Propagation, vol. 53, no. 12, pp. 3870-3876, Dec. 2005 https://doi.org/10.1109/TAP.2005.859919
  6. Hyun C. Yoon, Jaekwon Kim, Jooyong Park, and Jinwook Burm, 'Realization of passive RFID tag using surface acoustic wave', The Institute of Electronics Engineering of Korea 2005 Semiconductor Society Symposium, Jun. 2005
  7. Hyun C. Yoon, Jaekwon Kim, Jooyong Park, and Jinwook Burm, 'Passive RFID sensor tag', The Proceedings of the Korea Electromagnetic Engineering Society, vol. 16, no. 3, pp. 16-25, Jul. 2005
  8. C. A. Balanis, Antennas Theory: Analysis and Design,2/E, John Wiley & Sons, 1996
  9. Chihyun Cho, Hosung Choo, and I. Park, 'Design of UHF small passive tag antennas', IEEE InternationalSymposium on Antennas and Propagation 2005, vol. 2B, pp. 349-352, Jul. 2005
  10. Colin K. Campbell, Surface Acoustic Wave Devices for Mobile and Wireless Communications, Academic Press, 1998
  11. Keith Duncan Palmer, Mel W. van Rooyen, 'Simple broadband measurements of balanced loads using a network analyzer', IEEE Transactions on Instrumentation and Measurement, vol. 55, no. 1, pp. 266-272, Feb. 2006 https://doi.org/10.1109/TIM.2005.861493
  12. Rene Meys, Frederic Janssens, 'Measuring the impedance of balanced antennas by an s-parameter method', IEEE Antennas and Propagation Magazine, vol. 40, no. 6, pp. 62-65, Dec. 1998 https://doi.org/10.1109/74.739191
  13. Warren L. Stutzman, Gary A. Thiele, Antenna Theory and Design, 2/E, John Wiley & Sons, 1998