Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Strength Design for Welded Joint of pad-eye Considering Sling Angle and a Steel Plate Thickness

로프각도와 강판두께를 고려한 패드아이 용접부 강도설계에 관한 연구

  • 정호승 (한국조선기자재연구원 연구개발센터) ;
  • 김정렬 (한국해양대학교 기관시스템공학부)
  • Published : 2007.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Pad-eye is connected to crane with sling. When block is lift, pad-eye have a various applied force. Applied force on pad-eye is related to sling angle. Sling angle is decided by various parameters, including pad-eye location, sling length and crane location. Welded joint on pad-eye requires strength design because sling angle changes force on pad-eye. Strength design for welded joint of pad-eye will calculate with general mechanical design and FE analysis. FE analysis would become a useful tool in the analysis of welded joint. A commercial software(ANSYS 10.0) was used in the structural strength analysis for welded joint of pad-eye.

Keywords

References

  1. 대한조선학회, 조선용어사전, 문운당, pp. 208-209, 2005
  2. 조조, 박형근, 곽정호, 김광수, 신장룡, '상부구조물 인양해석', 대한조선학회 춘계학술대회논문집(1), pp. 315-325, 2004
  3. 홍장표, 기계설계, 도서출판 북스힐, pp. 243-256, 2001
  4. Walter D. Pilkey, 'Formulas for stress, strain, and structural matrices', JOHN WILEY & SONS, INC, pp. 380-386

Cited by

  1. 정보기술(IT)을 활용한 기업의 혁신 추진 전략과 핵심성공요인 도출 : 현대중공업의 성공사례를 중심으로 vol.11, pp.4, 2007, https://doi.org/10.9716/kits.2012.11.4.087