참고문헌
- Peng, X. F. and Peterson, G. P., 1996, Convective heat transfer and flow friction for water flow in microchannel structures, Int. J. Heat Mass Transfer, Vol. 39, No. 12, pp. 2599-2608 https://doi.org/10.1016/0017-9310(95)00327-4
- Qu, W. and Mudawar, I., 2002, Prediction and Measurement of incipient boiling heat flux in micro-channel heat sinks, Int. J. Heat Mass Transfer, Vol. 45, pp.3933-3945 https://doi.org/10.1016/S0017-9310(02)00106-0
- Peng, X. F. and Wang, B. X., 1998, Forced-convection and boiling characteristics in microchannels, Proceedings of 11th IHTC, Kyongju, Korea, August 23-28, Vol. 1, pp. 371-390
- Bowers, M. B. and Mudawar, I., 1994, High flux boiling in low flow rate, low pressure drop mini -channel and micro-channel heat sinks, Int. J. Heat Mass Transfer, Vol. 37, No.2, pp.321-332 https://doi.org/10.1016/0017-9310(94)90103-1
- Zhang, L., Koo, J. M., Jiang, L., Banerjee, S. S., Ashegi, M., Goodson, K. E., Santiago, J. G., and Kenny, T. W., 2000, Measurement and modeling of two-phase flow in micro-channels with nearly-constant heat flux boundary conditions, in: A. Lee et al. (Eds.), Micro-electro-mechanical Systems (MEMS) 2000, MEMS-Vol. 2, ASME, Orlando, FL, pp. 129-135
- Hetsroni, G., Mosyak, A., and Segal, Z., 2001, Nonuniform temperature distribution in electronic devices cooled by flow in parallel microchannels, IEEE Transactions on components and packaging technologies, Vol. 24, No.1, pp. 16-23 https://doi.org/10.1109/6144.910797
- Qu, W. and Mudawar, I., 2002, Transport phenomena in two-phase micro-channel heat sinks, Proceedings of IMECE2002, ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana, November 17-22, IMECE2002-33711
- Wu, X. Y. and Cheng, P., 2003, Visualization and measurements of periodic boiling in silicon microchannels, Int. J. Heat Mass Transfer, Vol. 46, pp.2603-2614 https://doi.org/10.1016/S0017-9310(03)00039-5
- Hetsroni, G., Mosyak, A., Segal, Z., and Pogrebnyak, E., 2003, Two-phase flow patterns in parallel micro-channels, International Journal of Multiphase Flow, Vol. 29, pp.341-360 https://doi.org/10.1016/S0301-9322(03)00002-8
- Peles, Y. P. and Haber, S., 2000, A steady state, one dimensional, model for boiling two phase flow in triangular micro-channel, Int. J. Multiphase flow, Vol. 26, pp. 1095-1115 https://doi.org/10.1016/S0301-9322(99)00084-1
- Thome, J. R., Dupont, V., and Jacobi, A. M., 2004, Heat transfer model for evaporation in microchannels. Part I: presentation of the model, Int. J. Heat Mass Transfer, Vol. 47, pp. 3375-3385 https://doi.org/10.1016/j.ijheatmasstransfer.2004.01.006
- Ryu, J. H., Choi, D. H., and Kim, S. J., 2003, Three-dimensional numerical optimization of a manifold microchannel heat sink, Int. J. Heat Mass Transfer, Vol. 46, pp. 1553-1562 https://doi.org/10.1016/S0017-9310(02)00443-X
- Tonomura, O., Tanaka, S., Noda, M., Kano, M., Hasebe, S., and Hashimoto, I., 2004, CFD-based optimal design of manifold in plate-fin microdevices, Chemical Engineering Journal, Vol. 101, pp.397-402 https://doi.org/10.1016/j.cej.2003.10.022
- Commenge, J. M., Falk, L., Corriou, J. P., and Matlosz, M., 2002, Optimal design for flow uniformity in microchannel reactors, AIChE Journal, Vol. 48, No.2, pp.345-358 https://doi.org/10.1002/aic.690480218
- Kulkarni, T., Bullard, C. W., and Cho, K., 2004, Header design tradeoffs in microchannel evaporators, Applied Thermal Engineering, Vol. 24, pp. 759-776 https://doi.org/10.1016/j.applthermaleng.2003.10.016
- Khrustalev, D. and Faghri, A., 1996, Estimation of the maximum heat flux in the inverted meniscus type evaporator of a flat miniature heat pipe, Int. J. Heat Mass Transfer, Vol. 39, No.9, pp. 1899-1909 https://doi.org/10.1016/0017-9310(95)00270-7
- Maziuk, V., Kulakov, A., Rabetsky, M., Vasiliev, L., and Vukovic, M., 2001, Miniature heat-pipe thermal performance prediction tool-software development, Applied Thermal Engineering, Vol. 21, pp.559-571 https://doi.org/10.1016/S1359-4311(00)00066-1
- Lin, L., Ponnappan, R., and Leland, J., 2002, High performance miniature heat pipe, Int. J. Heat Mass Transfer, Vol. 45, pp. 3131-3142 https://doi.org/10.1016/S0017-9310(02)00038-8
- Berre, M. Le, Launay, S., Sartre, V., and Lallemand, M., 2003, Fabrication and experimental investigation of silicon micro heat pipes for cooling electronics, J. Micromech. Microeng, Vol. 13, pp. 436-441 https://doi.org/10.1088/0960-1317/13/3/313
- Peterson, G. P., Duncan, A. B., and Weichold, M. H., 1993, Experimental investigation of micro heat pipes fabricated in silicon wafers, J. Heat Trans., Vol. 115, pp.751-756 https://doi.org/10.1115/1.2910747
- Launay, S., Sartre, V., and Lallemand, M., 2004, Experimental study on silicon micro-heat pipe arrays, Applied Thermal Engineering, Vol. 24, pp.233-243 https://doi.org/10.1016/j.applthermaleng.2003.08.003
- Murer, S., Lybaert, P., Gleton, L., and Sturbois, A., 2005, Experimental and numerical analysis of the transient response of a miniature heat pipe, Applied Thermal Engineering, Vol. 25, pp. 2566-2577 https://doi.org/10.1016/j.applthermaleng.2004.11.024
- Berre, M. Le, Pandraud, G., Morfouli, P., and Lallemand, M., 2006, The performance of micro heat pipes measured by integrated sensors, J. Micromech. Microeng, Vol. 16, pp. 1047-1050 https://doi.org/10.1088/0960-1317/16/5/023
- Ameel, T. A., Warrington, R. O., Wegeng, R. S., and Drost, M. K., 1997, Miniaturization technologies applied to energy systems, Energy Convers. Mgmt., Vol. 38, No. 10-13, pp. 969-982
- Munkejord, S. T., Mehlum, H. S., Zakeri, G. R., Neksa, P., and Pettersen, J., 2002, Micro technology in heat pumping systems, Int. J. Refrigeration, Vol. 25, pp. 471-478 https://doi.org/10.1016/S0140-7007(00)00036-0
- Drost, M. K., Friedrich, M., Martin, C., Martin, J., and Hanna, B., 1999, Mesoscopic heat-actuated heat pump development, Proc. of ASME Advanced Energy Systems Division, November 14-19, 1999, Nashville, U.S.A, pp. 9-14
- Choi, C., Ko, J., and Jeong, S., 2004, Experimental study on the development of micro sorption refrigerator, Proc. of the SAREK 2004 Winter Annual Conference, November 24, 2004, Seoul, Korea, pp. 602-606
- Selby, J. C., Shannon, M. A., Xu, K., and Economy, J., 2001, Sub-micrometer solid-state adhesive bonding with aromatic thermosetting copolyesters for the assembly of polyimide membranes in silicon-based devices, J. Micromech. Microeng., Vol. 11, pp. 672-685 https://doi.org/10.1088/0960-1317/11/6/308
- Narayanan, S. P. and Venkatarathnam, G., 1999, Analysis of performance of heat exchangers used in practical micro miniature refrigerators, Cryogenics, Vol. 39, pp.517-527 https://doi.org/10.1016/S0011-2275(99)00055-7
- Darabi, J. and Ekula, K., 2003, Development of a chip-integrated micro cooling device, Microelectronics J., Vol. 34, pp. 1067-1074 https://doi.org/10.1016/j.mejo.2003.09.010
- Gromoll, B., 1998, Micro cooling systems for high density packaging, Rev. Gen. Therm., Vol. 37, pp.781-787 https://doi.org/10.1016/S0035-3159(98)80004-4
- Richter, M., Linnemann, R., and Woias, P., 1998, Robust design of gas and liquid micro-pumps, Sensors and Actuators A, Vol. 68, pp. 480-486 https://doi.org/10.1016/S0924-4247(98)00053-3
- Stehr, M., Messner, S., Sandmaier, H., and Zengerle, R., 1996, The VAMP-a new device for handling liquids or gases, Sensors and Actuators A, Vol. 57, pp. 153-157 https://doi.org/10.1016/S0924-4247(97)80106-9
- Schabmueller, C. G. J., Koch, M., Mokhtari, M. E., Evans, A. G. R., Brunnschweiler, A., and Sehr, H., 2002, Self-aligning gas/liquid micropump, J. Micromech. Microeng., Vol. 12, pp, 420-424 https://doi.org/10.1088/0960-1317/12/4/313
- Yoon, J. S. and Kim, M. S., 2005, Performance analysis of a silicon-based micropump for gases, Proc. of The Sixth KSME-JSME Thermal and Fluids Engineering Conference, March 20-23, 2005, Jeju, Korea, Paper No. CJ02
- Yoon, J. S., Choi, J. W., and Kim, M. S., 2006, A study on the micro vapor compressor based on microfabrication process for the application to the micro miniature refrigeration system, Proc. of the SAREK 2006 Summer Annual Conference, June 21-23, 2006, Pyongchang, Korea, pp.477-482
- Organ, A. J., 1999, The miniature, reversed Siirling cycle cryo-cooler: integrated simulation of performance, Cryogenics, Vol. 39, pp. 253-266 https://doi.org/10.1016/S0011-2275(99)00020-X
- Bapat, S. L., 2000, Theoretical investigations on simultaneous operation of vapour compression refrigeration cycle and Stirling cycle in miniature Stirling cooler with two-component two-phase mixture, Cryogenics, Vol. 40, pp.1-8 https://doi.org/10.1016/S0011-2275(00)00003-5
- Yoo, J. H., Hong, J. I., and Cao, W., 2000, Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices, Sensors and Actuators, Vol. 79, pp.8-12 https://doi.org/10.1016/S0924-4247(99)00249-6
- Nika, P., Bailly, Y., Jeannot, J. C., and Labachelerie, M. D. 2003, An integrated pulse tube refrigeration device with micro exchangers: Design and experiments, Int. J. Thermal Sciences, Vol. 42, pp. 1029-1045 https://doi.org/10.1016/S1290-0729(03)00081-4
- Holland, H. J., Burger, J. F., Boersma, N., ter Brake, H. J. M., and Rogalla, H., 1998, Miniature 10-150 mW Linde-Hampson cooler with glass-tube heat exchanger operating with nitrogen, Cryogenics, Vol. 38, No.4, pp.407-410 https://doi.org/10.1016/S0011-2275(98)00031-9