Application of Fuzzy Integral Control for Output Regulation of Asymmetric Half-Bridge DC/DC Converter with Current Doubler Rectifier

  • Chung, Gyo-Bum (Department of Electrical Engneering, Hongik University) ;
  • Kwack, Sun-Geun (Department of Electrical Engneering, Hongik University)
  • Published : 2007.07.20

Abstract

This paper considers the problem of regulating the output voltage of a current doubler rectified asymmetric half-bridge (CDRAHB) DC/DC converter via fuzzy integral control. First, we model the dynamic characteristics of the CDRAHB converter with the state-space averaging method, and after introducing an additional integral state of the output regulation error, we obtain the Takagi-Sugeno (TS) fuzzy model for the augmented system. Second, the concept of parallel distributed compensation is applied to the design of the TS fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, numerical simulations of the considered design method are compared to those of the conventional method, in which a compensated error amplifier is designed for the stability of the feedback control loop.

Keywords

References

  1. Park, J.H., Zolghadri, M.R., Kimiaghalam, B., Homaifar, A., Lee, F.C.: LQG Controller for asymmetrical half-bridge converter with range winding. In Proceedings of 2004 IEEE International Symposium on Industrial Electronics (2004) 1261--1265
  2. L. Yao, J. Abu-Qahouq, and I. Batarseh: Unified Analog abd Digital models for Half Bridge DC-DC Converter with Current Doubler Rectifier. IEEE APEC2005, pp. 1386-1392, 2005
  3. H.K. Lam, T.H. Lee, F.H.F. Leung, P.K.S. Tam, Fuzzy control of DC_DC switching converters: stability and robustness analysis. In Proceedings of 27th Annual Conf. of the IEEE Industrial Electronics, pp.1261-1265, 2004
  4. Naim, R., Weiss G., Ben-Yaakov, S.: $H^{\infty}control$ applied to boost power converters. IEEE Transactions on Power Electronics, Vol. 12, (1997) 677-683 https://doi.org/10.1109/63.602563
  5. K.-Y. Lian, J.-J. Liou, and C.-Y. Huang: LMI-based integral fuzzy control of DC-DC converters. IEEE Transactions on Fuzzy Systems. 14(1), pp. 71-80, 2006 https://doi.org/10.1109/TFUZZ.2005.861610
  6. T.-S. Chiang, C.-S. Chiu, and P. Liu: Robust fuzzy integral regulator design for a class of affine nonlinear systems. IEICE Transactions on Fundamentals, E89 A(4), pp. 1100-1107, 2006 https://doi.org/10.1093/ietfec/e89-a.4.1100
  7. S. Korotkov, V. Meleshin, A. Nemchinov, and S. Fraidlin: Small-signal modeling of soft-switched asymmetrical half-bridge DC/DC converter. IEEE APEC95, pp. 707-711, 1995
  8. K. Tanaka and H. O. Wang, Fuzzy Control Systems Design and Analysis: A Linear Matrix Inequalities Approach, John Wiley & Sons, New York, 2001
  9. S. Boyd, L. El Ghaoui, E. Feron, and V. Balakrishnan, Linear Matrix Inequalities in Systems and Control Theory, SIAM Studies in Applied Mathematics, vol. 15, SIAM, Philadelphia, 1994
  10. H. D. Tuan, P. Apkarian, T. Narikiyo, and Y. Yamamoto: Parameterized linear matrix inequality techniques in fuzzy control system design, IEEE Transactions on Fuzzy Systems, 9(2), pp.324-332, 2001 https://doi.org/10.1109/91.919253
  11. PSIM User Manual, http://www.powersimtech.com/manual/psim-manual.pdf, Powersim Inc., 2006
  12. Abraham I. Pressman, Switching Power Supply Design, 2nd Edition, McGRAW-HILL, New York, 1998
  13. P. Gahinet, A. Nemirovski, A. J. Laub, and M. Chilali, LMI Control Toolbox, MathWorks Inc., Natick, MA, 1995