참고문헌
- Song, S. J., Park, I. Y. and Yun, Y. I., 2004, 'Performance Degradation Due to Blade Surface Roughness in a Single-Stage Axial Turbine,' Vienna, Austria, GT2004-53094
- Bons, J. P., Rivir, R. B., Patterson, W., Taylor, and McClain S. T., 2001, 'The Many Faces of Turbine Surface Roughness,' 2001-GT-0163, ASME Turbo Expo, Louisiana, USA
- Kang, Y. S., Yoo, J. C., Kang S. H, 2006, 'Numerical Predictions of Roughness Effects on the Performance Degradation of an Axial -Turbine Stage,' Journal of Mechanical Science and Technology, Vol. 20 No. 7, pp. 1077-1088 https://doi.org/10.1007/BF02916007
- Hamed, A.A., Tabakoff, W., 2005, Rivir, R.B., Das, K. and Arora, P., 'Turbine blade surface Deterion by Erosion,' Journal of Turbomachinery, Vol. 127, pp. 445-452 https://doi.org/10.1115/1.1860376
- Ellering, C. P., 2002, 'Combined Effects of Free Stream Turbulence, Pressure, Gradients and Surface Roughness on Turbine Aerodynamics,' Thesis of Master of Science in Aeronautical Engineering, Air Force Institute of Technology, Ohio, USA
- Hamed, A., Tabakoff, W., and Wenglarz, R., 2006, 'Erosion and Deposition in Turbomachinery,' Journal of Propulsion and Power, Vol. 22, No. 2, pp. 350-360 https://doi.org/10.2514/1.18462
- Hamed, A., Tabakoff, W., and Singh, D., 1998, 'Modeling of Compressor Performance Deterioration due to Erosion,' International Journal of Rotary Machinery, Vol. 4, No. 4, pp. 243-248 https://doi.org/10.1155/S1023621X98000207
- Gbadebo, S. A., Hynes, T. P., and Cumpsy, N.A., 2004, 'Influence of Surface Roughness on Three Dimensional Separation in Axial Compressor,'. Journal of Turbomachinery, Vol. 127, pp. 455-463
- Leipold, R., Boese, M. and Fottner, L., 2000, 'The Influence of Technical Roughness Caused by Precision Forging on the Flow Around a Highly Loaded Compressor Cascade,' Transactions of the ASME, Vol. 122, pp. 416-425
- Elmstrom, M. E., Millsaps, K.T., Patterson, J.S., 2005, 'Impact of Non-Uniform Leading Edge Coatings on the Aerodynamic Performance of Compressor Airfoils,' ASME Turbo Expo 2005, Nevada, USA, GT 2005-68091
- Aker, G.F., and Saravanamutto, H. I. H, 1989, 'Predicting Gas turbine Performance Degradation Due to Fouling Using Computer Simulation Techniques,' ASME Journal of Turbomachinery, Vol. 111, No. 2, pp. 343-350
- Balan, C., and Tabakoff, W., 1984, 'Axial Flow Compressor Performance Deterioration,' AIAA Paper No. 84-1208
- Tabakoff, W., 1988, Lakshminarasimha, A. N., and Pasin, M., 1990, 'Simulation of compressor performance deterioration due to erosion,' ASME Journal of Turbomachinery, Vol. 112, No. 1, pp. 78-83 https://doi.org/10.1115/1.2927424
- Suder, K. L., Chima, R. V., Strazisar, A. J., and Roberts, W. B., 1995, 'The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor,' ASME J. of Turbomachinery, vol. 117 pp. 491-505 https://doi.org/10.1115/1.2836561
- Fischer, A., Riess, W. and Seume, J., 2003, 'Performance of Strongly Bowed Stators in a 4-Stage High Speed Compressor,' ASME Turbo Expo, GT-2003-38392
- Gallimore, S. J., Bolger J. J., and Cumpsty, N. A., 2002, 'The Use of Sweep and Diahedral in Multistage Axial Flow Compressor Blading, Part 1: University Research and Methods Development,' ASME Turbo Expo, GT-2002- 30328
- Lee, S. Y. and Kim, K. Y., 2000, 'Design Optimization of Axial Flow Compressor Blades with Three-Dirnensional Navier-Strokes Solver,' KSME Int. J., Vol. 14, No. 9, pp. 1005-1012
- Nilay, P., Shyy, W., Grif, L., and Dorney, D.J., 2002, 'Shape Optimization of Supersonic Turbines Using Global Approximation Methods,' Journal of Propulsion and Power, Vol. 18, No. 3, pp. 509-518 https://doi.org/10.2514/2.5991
- Ahn, C. S. and Kim, K. Y., 2003, 'Aerodynamic Design Optimization of A Compressor Rotor with Navier-Stokes Analysis,' Proceedings of The Institution of Mechanical Engineers, Part A -Journal of Power and Energy, Vol. 217, No. 2, pp. 179-184 https://doi.org/10.1243/09576500360611209
- Jang, C.-M. and Kim, K. Y., 2005, 'Optimization of a Stator Blade using Response Surface Method in a Single-Stage Transonic Axial Compressor,' Proceedings of The Institution of Mechanical Engineers, Part A - Journal of Power and Energy, Vol. 219, No. 8, pp. 595-603 https://doi.org/10.1243/095765005X31298
- Jang, C.M., Samad, A., and Kim, K.Y., 2006, 'Optimal Design of Swept, Leaned and Skewed Blades in a Transonic Axial Compressor,' ASME Turbo Expo, Spain, GT2006-90384
- Reid, L., and Moore, R. D., 1978, 'Design and Overall Performance of Four Highly-Loaded, High-Speed Inlet Stages for an Advanced, High-Pressure-Ratio Core Compressor,' NASA TP-1337
- Jameson, A., Schmidt, W., and Turkel, E., 1981, 'Numerical Solutions of the Euler Equation by Finite Volume Methods Using Runge-Kutta Time Stepping Schemes,' AIAA Paper No. 81-1259
- Baldwin, B. S., and Lomax, H., 'Thin-Layer Approximation and Algebraic Model for Separated Turbulent Flows,' AIAA Paper 78-257, Jan. 1978
- White, F.M., 1991, Viscous Fluid Flow, McGraw Hill
- Cebeci, T. and Chang, K.C., 1978 'Calculation of incompressible rough-wall boundary-layer flows'. AIAA Journal, vol. 16, No. 7, p.730 https://doi.org/10.2514/3.7571
- Nikuradse, J., 1933, 'Laws for Flows in Rough Pipes', VDI-Forchungsheft 361, Series B, Vol. 4, p361