Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지

Assessment of Flame Retardancy for Acrylonitrile Butadiene Styrene Containing Metal Powder and Flame Retardant

금속분말-난연제 함유 ABS의 난연 특성 평가

  • 송영호 (충북대학교 안전공학과) ;
  • 정국삼 (충북대학교 안전공학과)
  • Published : 2007.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The flame retardancies by the addition of metal powder and flame retardant were evaluated to present as the fundamental data to decrease the fire hazard of polymers and life losses by suffocation and poisoning. For this study, the experiments of flame retardancy were conducted as follows : weight loss rate using thermogravimetric analysis, the measurement of the limiting oxygen index(LOI) and char yield. And smoke mass concentration and CO yield were measured. Acrylonitrile butadiene styrene containing metal powder and flame retardant reduced weight loss rate and increased LOI and char yield with the decreased smoke mass concentration and CO yield. It was found that the most effective complex was tricresyl phosphate-Mo complex.

고분자 물질의 화재 위험성 및 화재시 인명 피해의 감소를 위한 기초자료로 제시하고자 난연제 및 금속분말의 첨가에 의한 난연성 평가를 수행하였다. 본 연구를 위하여 중량감소율,한계산소지수 및 탄화층 생성량 측정, 연기 중량 농도 및 일산화탄소 발생량 측정의 실험을 수행하였다. 금속분말과 난연제를 함유한 acrylonitrile butadiene styrene은 낮은 중량감소율을 나타내었고, 한계산소지수 및 탄화충 생성량은 증가하였으며, 연기 중량 농도 및 일산화탄소의 발생량도 감소하는 결과를 나타내었다. 또한 가장 효과적인 복합체는 tricresyl phosphate-Mo 복합체로 나타났다.

Keywords

References

  1. Y.H. Song and K.S. Chung, 'Assessment on the Flame Retardancy for Polyethylene/Montmorillonite Nanocomposite', T. of Korean Institute of Fire Sci. & Eng., Vol. 20, No. 4, pp.72-76(2006)
  2. A.R. Horrocks and D. Price, Fire Retardant Materials, CRC Press, New York(2001)
  3. S.C. Moon, J.K. Choi, and B.W. Jo, 'Foaming Properties and Flame Retardancy of the Foams Based on NBR/GTR Compounds', Elastomer, Vol. 37, No. 3, pp.159-169(2002)
  4. S.S. Choi, W.B. Im, J.H. Kim, Y.A. Whang, and J.W. Woo, 'A Study on the Flame Retardant Properties of EPDM Rubber Mixed with Phosphorusand Halogen Compound', Elastomer, Vol. 37, No.4, pp.224-233(2002)
  5. S.K. Sharma, 'Flame Retardance and Smoke Suppression of Poly(vinyl chloride) Using Multicomponent Systems', Fire Technology, Vol. 39, pp. 247-260(2003) https://doi.org/10.1023/A:1024141531157
  6. S. White, PhD Thesis, University of Northumbria(1998)
  7. P. Carty and S. White, 'Anomalous Flammability Behaviour of CPVC(chlorinated poly vinylchloride) in Blends with ABS(acrylonitrile-butadiene-styrene) Containing Flame-retarding/Smoke-sup-pressing Compounds', Polymer, Vol. 38, No. 5, pp.1111-1119(1997) https://doi.org/10.1016/S0032-3861(96)00606-4
  8. G.W. Mulholland, E.L. Johnsson, D.A. Shear, and M.G. Fernandez, 'Design and Testing of a New Smoke Concentration Meter', pp.27-28, NIST Annual Conference on Fire Research, Maryland(1998)
  9. G.W. Mulholland and C. Croakin, 'Specific Extinction Coefficient of Flame Generated Smoke', Fire Mat., Vol. 24, pp.227-230(2000) https://doi.org/10.1002/1099-1018(200009/10)24:5<227::AID-FAM742>3.0.CO;2-9
  10. J.F. Widmann, J.C. Yang, T.J. Smith, S.L. Manzello, and G.W. Mulholland, 'Measurement of the Optical Extinction Coefficients of Post Flame Soot in the Infrared', Comb. Flame, Vol. 134, pp.119-129(2003) https://doi.org/10.1016/S0010-2180(03)00089-0
  11. S. Budavari, M.J. O'neil, A. Smith, P.E. Heckelman, and J.F. Kinneary, The Merck Index, 12th ed., Merck & Co., Inc., New Jersey(1996)
  12. JIS K7228,,'プラスチシクの煙濃度及び燃燒測定方法', 日本規格協會(1987)
  13. ASTM D2863-77 (revised 2000), 'Standard Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)', ASTM(2000)
  14. 송영호, '금속유기복합체를 이용한 고분자재료의 난연특성', 충북대학교 대학원 박사학위논문(2005)
  15. C.J. Hilado, 'Flammability Handbook for Plastics', Technomic, pp.38-47(1982)
  16. R. Friedman, Principles of Fire Protection Chemistry and Physics, 3rd ed., NFPA(1998)
  17. C.S. Wu, Y.L. Liu, and Y.S. Chiu, 'Epoxy Resins Possessing Flame Retardant Elements from Silicon Incorporated Epoxy Compounds Cured with Phosphorous or Nitrogen Containing Curing Agents', Polymer, Vol. 43, pp.4277-4284(2002) https://doi.org/10.1016/S0032-3861(02)00234-3