DOI QR코드

DOI QR Code

언더필 공정에 대한 유동 특성과 침투 시간 예측 연구

Flow Characteristics and Filling Time Estimation for Underfill Process

  • Sim, Hyung-Sub (Graduate School of Mechanical Engineering, Chung-Ang University) ;
  • Lee, Seong-Hyuk (School of Mechanical Engineering, Chung-Ang University) ;
  • Kim, Jong-Min (School of Mechanical Engineering, Chung-Ang University) ;
  • Shin, Young-Eui (School of Mechanical Engineering, Chung-Ang University)
  • 발행 : 2007.06.30

초록

The present study is devoted to investigate the transient flow and to estimate the filling time fur underfill process by using the numerical model established on the fluid momentum equation. For optimization of the design and selection of process parameters, this study extensively presents an estimation of the filling time in the view points of some important factors related to underfill materials and flip-chip geometry. From the results, we conclude that the filling time changes with respect to the under fill materials because of different viscosity, surface tension coefficient and contact angle. It reveals that, as the gap height increases, the filling time decreases substantially, and goes to the saturated values.

키워드

참고문헌

  1. R.R. Tummala and E.J. Rymaszewski : Microelectronics Packaging Handbook, New York, 1989
  2. M.H. Gordon, G. Ni, W.F. Schmidt, and R.P. Selvam : A Capillary-driven Underfill Encapsulation Process, Advanced Packaging, 8 (1999), 34-37
  3. S.C. Machuga, S.E. Lindsey, K.D. Moore, and A.F. Skipor : Encapsulation of Flip-Chip Structures, Proceedings of IEEE/CHMT Symposium (1992), 53-58
  4. F. Nakano, T. Soga, and S. Amagi : Resin Insertion Effect on Thermal Cycle Resistivity of Flip Chip Mounted LSI Devices, Proceedings of ISHM Conference (1987), 536-541
  5. G. O'Malley, J. Giesler, and S.C. Machuga : The Importance of Materials Selection for Flip Chip on Board Assemblies, IEEE Transactions on Components and Packaging Technologies, 17 (1994), 248-255 https://doi.org/10.1109/96.311770
  6. D. Suryanarayana, R. Hsiao, T.P. Gall, and J.J. McCreary : Enhancement of Flip-Chip Fatigue Life by Encapsulation, IEEE Transaction on Components Hybrids Manufacture Technologies, 14 (1991), 218-223 https://doi.org/10.1109/33.76536
  7. J.W. Wan, W.J. Zhang, and D.J. Bergstrom : Recent Advances in Modeling the Underfill Process in Flip-Chip Packaging, Microelectronics Journal, 38 (2007), 67-75 https://doi.org/10.1016/j.mejo.2006.09.017
  8. S. Han and K.K. Wang : Analysis of the Flow of Encapsulant during Underfill Encapsulation of Flip-Chips, IEEE Transactions on Components and Packaging Technologies, 20-4 (1997), 424-433 https://doi.org/10.1109/96.641511
  9. J.W. Wan, W.J. Zhang, and D.J. Bergstrom : Influence of Transient Flow and Solder Bump Resistance on Underfill Process, Microelectronics Journal, 36 (2005), 687-693 https://doi.org/10.1016/j.mejo.2005.05.022
  10. E.W. Washburn : The Dynamics of Capillary Flow, Physical Review, 17 (1921), 273-283 https://doi.org/10.1103/PhysRev.17.273