DOI QR코드

DOI QR Code

Intermetallic Compounds Behavior at Laser Overlay Interface of Aluminum and Fe-based Powder

Al-Fe 레이저 오버레이층 경계면에서의 금속간화합물 거동

  • 강남현 (부산대학교 재료공학부) ;
  • 유연곤 (신한다이아몬드 R&BD 신소재연구팀) ;
  • 이창우 (한국생산기술연구원 정밀접합팀) ;
  • 김정한 (한국생산기술연구원 정밀접합팀)
  • Published : 2007.06.30

Abstract

A $CO_2$ laser overlay was conducted by using a Fe-based powder on the AC2B aluminum substrate. Cracks and intermetallic compounds (IMC) were observed inconsistently along the interface between the overlay and post-molten layer. A scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) detected some Fe-rich IMC ($Fe_3Al$, FeAl) as well as the brittle Al-rich IMC ($Fe_2Al_5,\;FeAl_3$). Micro vickers hardness proved the formation of Al-rich IMC ($FeAl_3$) along the interface by showing HV0.1 $800{\sim}900$. Furthermore, nano indentation was successfully applied to investigate the behavior of IMC more precisely than the micro vickers hardness.

Keywords

References

  1. Y-G. Yoo, N. Kang, C-H. Kim, J-H. Kim and M-S. Kim : Effect of process parameters on laser overlay behavior of Fe-based alloy powder on aluminum substrate, Journal of KWJS 25-1 (2007) 30-36 https://doi.org/10.5781/KWJS.2007.25.1.030
  2. M. J. Rathod and M. Kutsuna : Joining of aluminum alloy 5052 and low-carbon steel by laser roll welding, Welding Journal January (2004) 16s-26s
  3. P. Peyre, G. Sierra, F. Deschaux-Beaume, D. Stuart and G. Fras : Generation of aluminium-steel joints with laser-induced reactive wetting, Materials Science and Engineering A444 (2007) 327-338
  4. R. S. C. Paredes, S. A. Correa, D. De Lima and A. R. Capra : The weldability of aluminium coated carbon steel, Welding international 20-10 (2006) 794-801 https://doi.org/10.1533/weli.2006.20.10.794
  5. A. Mathieu, S. Mattei, L. Rodriguez, A. Deschamps, M. Suery, J-C. Viala, B. Martin and D. Grevey : Laser brazing of steel-aluminum assembly, Proceedings of the 23rd international congress on applications of lasers and electro-optics (2004)
  6. M. Kreimeyer, F. Wagner and G. Sepold : Development of a combined joining-forming process for aluninumsteel joints, Proceedings of the 23rd international congress on applications of lasers and electro-optics (2004)
  7. T-W. Park, J-H. Cho and S-J. Na : A study on laser joining of low carbon steel and aluminum alloy-part I: process parameters, Journal of KWS 23-5 (2005) 25-29