Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

THE BONDING DURABILITY OF TOTAL ETCHING ADHESIVES ON DENTIN

산부식형 상아질 접착제의 접착 내구성에 관한 연구

  • Jung, Mi-Ra (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Choi, Gi-Woon (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Park, Sang-Hyuk (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Park, Sang-Jin (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University)
  • 정미라 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 최기운 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 박상혁 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 박상진 (경희대학교 대학원 치의학과 치과보존학교실)
  • Published : 2007.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength (${\mu}TBS$) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups by etching times (5, 15, 25 sec), adhesives types (Scotchbond Multipurpose (SM), Single Bond (SB), One-Step (OS)) and number of thermocycling (0, 2,000 cycles). Flat dentin surfaces were prepared on mid-coronal dentin of extracted third molars. After exposed fresh dentin surfaces were polished with 600-grit SiC papers, each specimen was acid-etched with 35% phosphoric acid (5, 15, 25 sec) and bonded with 3 different types of total etching adhesives respectively. Then, hybrid composite Z-250 was built up. Half of them were not thermocycled (control group) and the ethers were subjected to 2,000 thermocycle (experimental group). They were sectioned occluso-gingivally into $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams and tested with universal testing machine at a crosshead speed of 1.0 mm/min. Within limited data of this study, the results were as follows 1. There was no statistically significant difference in ${\mu}TBS$ between the thermocycled and non-thermocycled groups, except for both SM and SB etched for 25 sec. 2. In thermocycled SM and SB groups, bond strength decreased by extended etching time. In total etching systems, adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may cause deteriorate effects on bond strength when ethanol-based adhesive was used.

본 연구의 목적은 3종의 전체산부식 상아질 접착 시스템에서 적절한 산부식 시간과 접착제의 침투 능력에 대해 규명하고자 하였다. 우식이 없는 54개의 제3대구치의 상아질 표면을 5, 15, 25초 동안 산부식하고 산부식형 접착제 3종 (Scotchbond multipurpose, Single Bond, One Step) 을 도포한 후 복합레진을 충전하였다. 각 시편은 0회 (대조군) 또는 2000회 열순환 ($5^{\circ}C\;-\;55^{\circ}C$) (실험군) 후 미세인장강도를 측정하고 파단면을 관찰하여 다음과 같은 결론을 얻었다. 1. 실험군은 대조군에 비하여 결합강도가 감소하였으며, 특히 25초 산부식한 SM 및 SB군에서는 통계학적 유의차를 나타내었다. 2. 열순환 처리한 SM군과 SB군의 경우, 25초 간 산부식한 군이 5초 간 산부식한 군과 15초 간 산부식한 군에 비해 유의성 있게 낮은 결합강도를 나타냈다 (p < 0.05). 3. OS군의 경우, 산부식 시간 및 열순환 여부에 따른 유의성 있는 차이가 나타나지 않았다 (p > 0.05). 상아질 접착의 내구성은 접착제의 용매와 산부식 시간에 의해 영향을 받으며 특히, ethanol-based adhesive를 사용할 때 과도한 산부식은 유의해야 한다.

Keywords

References

  1. Mjor lA, Moorhead JE, Dahl JE. Reasons for replacement of restorations in permanent teeth in general dental practice. Int Dent J 50:360-366, 2000
  2. Titley K, Chernecky R. Maric B, Smith D. Penetration of a dentin bonding agent into dentin. Am J Dent 7: 190-194, 1994
  3. Van Meerbeek B, Inokoshi S, Braem M, Lambrechts P, Vanherle G. Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive system. J Dent Res 71: 1530-1540, 1992 https://doi.org/10.1177/00220345920710081301
  4. Nakabayashi N, Nakamura M, Yasuda N. Hybrid layer as a dentin-bonding mechanism. J Esthet Dent 3: 133-138, 1991 https://doi.org/10.1111/j.1708-8240.1991.tb00985.x
  5. Gwinnett AJ. Chemically conditioned dentin: A comparison of conventional and environmental SEM finding. Dent Mater 10:150-155, 1994
  6. Uno S, Finger WJ. Effects of acidic conditioners on dentine demineralization and dimension of hybrid layers. J Dent 24:211-216, 1996 https://doi.org/10.1016/0300-5712(95)00056-9
  7. Erickson RL. Surface interactions of dentin adhesive materials. Oper Dent 5: 81-94, 1992
  8. Pashley DH, Horner JA, Brewer PD. Interactions of conditioners on the dentin surface. Oper Dent Suppli 5:137-150, 1992
  9. Pashely DH. The effect of acid etching on the pulpodentin complex. Oper Dent 17:229-242, 1992
  10. Inokoshi S, Hosoda H. Harnirattisai C, Shimada Y. Interfacial structure between dentin and seven dentin bonding systems revealed using argon ion beam etching. Oper Dent 18:8-16, 1993
  11. Giannini M, Seixas CAM, Reis AF, Pimenta LAF. Six-month storage-time evaluation of one-bottle adhesive systems to dentin. J Esth Rest Dent 15:43-8, 2003 https://doi.org/10.1111/j.1708-8240.2003.tb00281.x
  12. Amer A, Valeria V. Evaluation of etching time on dentin bond strength using single bottle bonding systems. J Adhes Dent 6:105-110, 2004
  13. Titley K, Chernecky R. Maric B, Valiquette N, Smith DC. The morphology of the demineralized layer in primed dentin. Am J Dent 7:22-26, 1994
  14. Tay FR. Gwinnett JA, Wei SH. Relation between water content in acetone/alcohol-basd primer and interfacial ultrastructure. J Dent 26:147-156, 1998 https://doi.org/10.1016/S0300-5712(96)00090-5
  15. Van Meerbeek B, Yoshida Y, Lambrechts P, Vanherle G, Duke ES, Eick JD, Robinson SJ. TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res 77:50-59, 1998 https://doi.org/10.1177/00220345980770010501
  16. Reis A, Loguercio AD, Azevedo CLN, Carvalho RM, Singer JM, Grande RHM. Moisture spectrum of demineralized dentin for different solvent-based adhesive system. J Adhes Dent 5: 183-192, 2003
  17. Carvalho RM, Mendonca JS, Santiago SL, Silveira RR. Garcia FCP, TayFR, Pashley DH. Effects of HEMA/solvent combinations on bond strength to dentin. J Dent Res 82:597-601. 2003 https://doi.org/10.1177/154405910308200805
  18. Erick JD, Gwinnett AJ. Pashley DH, Robinson SJ. Current concepts on adhesion to dentin. Crit Rev Oral BioI Med 8:306-335, 1997 https://doi.org/10.1177/10454411970080030501
  19. Sano H. Takatsu T, Ciucchi B, Horner JA, Matthews WG, Pashley DH, Nanoleakage: leakage within the hybrid layer. Oper Dent 20: 18-25, 1995
  20. Yoshida Y, Van Meerbeeek B, Nakayama Y, Snauwaert .I, Hellemans L, Lambrechts P, Vanherle G, Wakasa K. Evidence of chemical bonding at biomaterial-hard tissue interfaces. J Dent Res 79: 709-714, 2000 https://doi.org/10.1177/00220345000790020301
  21. Van Meerbeek B, Vargas M, Inoue S, Yoshida Y, Peumans M, Lambrechts P, Vanherle G. Adhesives and cements to promote preservation dentistry. Oper Dent 26: 119-144, 2001
  22. Amstrong SR. Keller JC, Boyer DB. The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater 17:268-276, 2001 https://doi.org/10.1016/S0109-5641(00)00081-6
  23. De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K. Lanbrechts P, Vanherle G. Four year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82: 136-140, 2002
  24. Hashimoto M, Ohno H, Sano H, Tay FR, Kaga M, Kudou Y, Oguchi H, Araki Y, Kuboda M. Micromorphological changes in resin-dentin bonds after 1 year water storage. J Biomed Mater Res 63:306-311, 2002 https://doi.org/10.1002/jbm.10208
  25. Sano H, Yoshikawa T, Pereira PNR, Kanemura N, Morigami M, Tagami J, Pashley DH. Long-term durability of dentin bonds made with a self etching primer, in vivo. J Dent Res 78:906-911, 1999 https://doi.org/10.1177/00220345990780041101
  26. Hashimoto M, Ohno H, Kaga M, Kudo K. Sano H, Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79: 1385-1391. 2000 https://doi.org/10.1177/00220345000790060601
  27. Koshiro K. Inoue S, Tanaka T, Koase K. Fujita M, Hashimoto M, Sano H. In vivo degradation of resindentin bonds produced by a self-etch vs. a total etch adhesive system. Eur J Oral Sci 112:368-375, 2004 https://doi.org/10.1111/j.1600-0722.2004.00141.x
  28. Gale MS, Darvell BW, Thermal cycling procedure for laboratory testing of dental restorations. J Deht 27:8999, 1999
  29. Kubo S, Yokota H, Sata y, Hayashi Y. Microleakage of self-etching primers after thermal and flexural load cycling. Am J Dent 14:163-169, 2001
  30. Cardoso PE, Placido E, Moura SK. Microleakage of four simplified adhesive systems under thermal and mechanical stresses. Am J Dent 15: 164-168, 2002
  31. Frankenberger R, Kramer N, Petschelt A. Long-term effect of dentin primers on enamel bong strength and marginal adaptation. Oper Dent 25:11-19, 2000
  32. Gwinnett AJ, Yu S. Effect of long-term water storage on dentin bonding. Am J Dent 8:109-111, 1995
  33. Hashimoto M, Ohno H, Sano H, Kaga M, Oguchi H. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy. Biomaterials 24:3795-3803, 2003 https://doi.org/10.1016/S0142-9612(03)00262-X
  34. Camps J, Pashely DH. Buffering action of human dentin in vitro. J Adhes Dent 2:39-50, 2000
  35. Kinney JH, Balooch M, Hauot .JrDI, Marshall SJ, Marshall JrGW. Mineral distribution and dimensional changes in human dentin during demineralization. J Dent Res 74:1179-1184, 1995 https://doi.org/10.1177/00220345950740050601
  36. Amer AH, Valeria VG. Evaluation of etching time on dentin bond strength using single bottle bonding systems. J Adhes Dent 6:105-110, 2004
  37. Mauro FN, Edward JS, Jorge P. Effects of de mineralization depth on microtensile bond strength to human dentin. J Adhes Dent 3: 137-143, 2001
  38. Kanca J. Effects of resin primer solvents and surface wetness on resin composite bond strengths to dentin. Am J Dent 5:213-215, 1992
  39. Alessandra R, Alessandro DL, Ricardo Me, Rosa HM. Durability of resin dentin interfaces: effects of surface moisture and adhesive solvent component. Dent Mater 20: 669-676, 2004 https://doi.org/10.1016/j.dental.2003.11.006
  40. Pashley EL. Zhang Y. Lockwood PE. Rueggeberg FA. Pashley DH. Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater 14:6-10, 1998 https://doi.org/10.1016/S0109-5641(98)00003-7
  41. Paul SJ, Leach M, Rueggeberg FA, Pashley DH. Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent 27: 209-214, 1999 https://doi.org/10.1016/S0300-5712(98)00042-6

Cited by

  1. Difference in bond strength according to filling techniques and cavity walls in box-type occlusal composite resin restoration vol.34, pp.4, 2009, https://doi.org/10.5395/JKACD.2009.34.4.350