Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Experiments for Forming Limit Diagram and Springback Characteristics of AZ31B Magnesium Alloy Sheet at Elevated Temperature

AZ31B 마그네슘 합금판재의 온간 성형한계도 및 스프링백 특성 시험

  • 김헌영 (강원대학교 대학원 기계.메카트로닉스 공학부) ;
  • 최선철 (강원대학교 대학원 기계.메카트로닉스 공학과) ;
  • 이한수 (강원대학교 대학원 기계.메카트로닉스 공학과) ;
  • 김형종 (강원대학교 기계.메카트로닉스 공학부) ;
  • 이경택 (㈜ 오스템 기술연구소)
  • Published : 2007.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

Keywords

References

  1. S. H. Zhang, K. Zhang, Y. C. Xu, Z. T. Wang, Y. Xu, Z. G. Wang, 2007, Deep-drawing of magnesium alloy sheets at warm temperatures, J. Mat. Proc. Tech. Vol. 185, pp. 147-151 https://doi.org/10.1016/j.jmatprotec.2006.03.150
  2. S. Yoshihara, K. Manabe, H. Nishimura, 2005, Effect of blank holder force control in deepdrawing process of magnesium alloy sheet, J. Mat. Proc. Tech. Vol. 170, pp. 579-585 https://doi.org/10.1016/j.jmatprotec.2005.06.028
  3. T. B. Huang, Y. A. Tsai, F. K. Chen, 2006, Finite element analysis and formability of non-isothermal deep drawing of AZ31B sheets, J. Mat. Proc. Tech, Vol. 177, pp. 142-145 https://doi.org/10.1016/j.jmatprotec.2006.04.088
  4. 김한구, 배정운, 추동균, 강충길, 2006, AZ31B 마그네슘 판재의 온.열간 딮드로잉에 관한 연구, 한국소성가공학회지, 제15권, 제7호, pp. 504-511 https://doi.org/10.5228/KSPP.2006.15.7.504
  5. 김홍규, 이위로, 홍석관, 김종덕, 한병기, 2006, 마그네슘 합금 AZ31 판재의 온간 사각컵 디프드로잉 공정의 유한요소 해석, 한국소성가공학회지, 제15권, 제3호, pp. 232-240 https://doi.org/10.5228/KSPP.2006.15.3.232
  6. T. Naka, G. Torikai, R. Hino, F. Yoshida, 2001, The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum magnesium alloy sheet, J. Mat. Proc. Tech., Vol. 113, pp. 648-653 https://doi.org/10.1016/S0924-0136(01)00650-1
  7. F. K. Chen, T. B. Huang, 2003, Formability of stamping magnesium-alloy AZ31 sheets, J. Mat. Proc. Tech., Vol. 142, pp. 643-647 https://doi.org/10.1016/S0924-0136(03)00684-8
  8. C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini, 2006, Air bending of AZ31 magnesium alloy in warm and hot forming conditions, J. Mat, Proc. Tech., Vol. 177, pp 373-376 https://doi.org/10.1016/j.jmatprotec.2006.03.222
  9. J. K. Lee, G. L. Kinzel, R. H. Wagoner, 1996, NUMISHEET'96
  10. 최선철, 김형종, 2006, 고해상도 화상처리를 통한 자동 변형률 측정의 정확도와 편의성 개선, 한국소성가공학회 제5회 박판성형심포지엄, pp. 34-39
  11. A. Makinouchi, E. Nakamachi, E. Onate, R. H. Wagoner, 1993, NUMISHEET'93

Cited by

  1. Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet vol.41, pp.1, 2010, https://doi.org/10.1007/s11661-009-0043-7
  2. A Study on Warm Forming Technology of Car Body Reinforced Dash Using Magnesium Alloy Sheet vol.23, pp.5, 2014, https://doi.org/10.7735/ksmte.2014.23.5.519
  3. A Study on the Mechanical Properties and Formability of Mg AZ31B Sheet vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.495