DOI QR코드

DOI QR Code

탄성파 주시 및 진폭 자료의 Simulation에 의한 터널 위치 추적에 관한 연구

A Study of Tunnel Position Interpretation using Seismic Travel Time and Amplitude Data Simulation

  • 서백수 (강원대학교 지구.환경공학부) ;
  • 손권익 (강원대학교 산업공학과)
  • Suh, Baek-Soo (Division of Environmental and Geosystem Engineering, Kangwon National University) ;
  • Sohn, Kwon-Ik (Department of Industrial Engineering, Kangwon National University)
  • 발행 : 2007.02.28

초록

우리나라에서의 심부 소형 터널의 탐사에는 주로 탄성파 탐사법이나 지오레이다 탐사법이 사용되어 왔으며, 그중에서 탄성파 탐사는 주로 주시나 진폭을 이용하여 터널의 위치를 해석하였다. 그러나 측정 시추공간의 짧은 거리와 초동의 피킹 오차 등에 의해서 터널의 정확한 위치 해석은 매우 불안정하였다. 이러한 문제를 극복하기 위하여, 본 연구에서는 주시 자료와 진폭 자료의 시뮬레이션에 의한 위치 추적을 시도하였다.

Seismic and georadar prospecting methods have been used to detect deep seated small tunnel in Korea. The tunnel position interpretation of seismic method has been performed mainly by wave travel time and amplitude. But it was very unstable to interpret the exact tunnel position because of short interval of two measuring boreholes and picking mistake of first arrivals. To solve this problem, this study applied travel-time and amplitude data simulation methods to detect tunnel position.

키워드

참고문헌

  1. 고광범, 이두성, 2003, 터널탐지를 위한 시추공간 탄성파 자료의 3차원 Kirchhoff 구조보정 적용. 한국지구시스템공학회지, 40(5), 360-366
  2. 서백수, 1988, 유한요소법에 의한 지하공동 탄성파 탐사에 관한 연구, 서울대학교 공학박사 학위논문, 206 p
  3. 서백수, 오석훈, 손권익, 이상철, 2006, 터널 주위의 탄성파 전파양상에 관한 연구. 제84회 한국지구시스템공학회논문집, 291-296
  4. 서상용, 1982, 유한차분법을 이용한 과도 전자장의 계산, 서울대학교 공학박사 학위논문, 162 p
  5. 한현철, 1998, 2차원 전 파형 역산을 이용한 탄성파 토모그래피. 서울대학교 공학석사 학위논문, 49 p
  6. Cook, J.C, 1965, Seismic mapping of underground cavities using reflection amplitude. Geophysical Prospecting, 30, 527-538
  7. McCann, D.M., 1986, Application of cross-borehole seismic measurements in site investigation surveys. Geophysics, 51, 914-929 https://doi.org/10.1190/1.1442149