DOI QR코드

DOI QR Code

Modeling of Turbulent Heat Transfer in an Axially Rotating Pipe Flow

축을 중심으로 회전하는 관유동에서 난류열전달의 모형화

  • Published : 2007.09.01

Abstract

The elliptic conceptual second moment model for turbulent heat fluxes, which was proposed on the basis of elliptic-relaxation equation, was applied to calculate the turbulent heat transfer in an axially rotating pipe flow. The model was closely linked to the elliptic blending model which was used for the prediction of Reynolds stress. The effects of rotation on the turbulent characteristics including the mean velocity, the Reynolds stress tensor, the mean temperature and the turbulent heat flux vector were examined by the model. The numerical results by the present model were directly compared to the DNS as well as the experimental results to assess the performance of the model predictions and showed that the behaviors of the turbulent heat transfer in the axially rotating pipe flow were satisfactorily captured by the present models.

Keywords

References

  1. Reich, G. and Beer, H., 1989, 'Turbulent Flow and Heat Transfer in an Axially Rotating Pipe-I. Effect of Rotation on Turbulent Pipe Flow,' Int. J. Heat Mass Transfer, Vol. 32, pp. 551-561 https://doi.org/10.1016/0017-9310(89)90143-9
  2. Imao, S., Itoh, M. and Harada, T., 1996, 'Turbulent Characteristics of the Flow in an Axially Rotating Pipe,' Int. J. Heat Fluid Flow, Vol. 17, pp. 444-451 https://doi.org/10.1016/0142-727X(96)00057-4
  3. Eggels, J. G. M., Unger, F., Weiss, M. H., Westerweel, J., Adrian, R. J., Friedrich, R. and Nieuwstadt, F. T. M., 1996, 'Fully Developed Turbulent Pipe Flow: A Comparison Between Direct Numerical Simulation and Experiment,' J. Fluid Mech., Vol. 268, pp. 175-209 https://doi.org/10.1017/S002211209400131X
  4. Orlandi, P. and Fatica, M., 1997, 'Direct Simulations of Turbulent Flow in a Pipe Rotating about Its Axis,' J. Fluid Mech., Vol. 343, pp. 43-72 https://doi.org/10.1017/S0022112097005715
  5. Speziale, C. G., Younis, B. A. and Berger, S. A., 2000, 'Analysis and Modeling of Turbulent Flow in an Axially Rotating Pipe,' J. Fluid Mech., Vol. 407, pp. 1-26 https://doi.org/10.1017/S0022112099007600
  6. Jakirlic, S., Hanjalic, K. and Tropea, C., 2002, 'Modeling Rotating and Swirling Turbulent Flows: A Perpetual Challenge,' AIAA J., Vol. 40, pp. 1984-1996 https://doi.org/10.2514/2.1560
  7. Pettersson, B. A., Andersson, H. I. and Brunvoll, A. S., 1998, 'Modeling Near-Wall Effects in Axially Pipe Flow by Elliptic Relaxation,' AIAA J., Vol. 36, pp. 1164-1170 https://doi.org/10.2514/2.527
  8. Durbin, P. A., 1993, 'A Reynolds Stress Model for Near-wall Turbulence,' J. Fluid Mech., Vol. 249, pp. 465-498 https://doi.org/10.1017/S0022112093001259
  9. Grundestam, O., Wallin, S. and Johansson, A.V., 2006, 'Observations on the Predictions of Fully Developed Rotating Pipe Flow Using Differential Explicit Algebraic Reynolds Stress Models,' European J. of Mechanics B/Fluids, Vol. 25, pp. 95-112 https://doi.org/10.1016/j.euromechflu.2005.03.004
  10. Satake, S. and Kunugi, T., 2002, 'Direct Numerical Simulation of Turbulent Heat Transfer in an Axially Rotating Pipe Flow,' Int. J. Numerical Methods for Heat & Fluid Flow, Vol. 12, pp. 958-1008 https://doi.org/10.1108/09615530210448723
  11. Thielen, L., Hanjalic, K., Jonker, H. and Manceau, R., 2004, 'Prediction of Flow and Heat Transfer in Multiple Impinging Jets with an Elliptic-blending Second-moment Closure,' Int. J. Heat Mass Transfer, Vol. 48, pp. 1583-1598 https://doi.org/10.1016/j.ijheatmasstransfer.2004.10.025
  12. Shin, J.K., An, J.S. and Choi, Y.D., 2005, 'Prediction of Combined Forced and Natural Convection in a Vertical Plane Channel with an Elliptic-blending Second Moment Closure,' Trans. of the KSME(B), Vol. 29, pp. 1265-1276
  13. Speziale, C.G., Sarkar, S. and Gatski, T.B., 1991, 'Modeling of the Pressure-Strain Correlation Tensor: an Invariant Dynamical Systems Approach,' J. Fluid Mech., Vol. 227, pp. 245-272 https://doi.org/10.1017/S0022112091000101
  14. Daly, B.J. and Harlow, F.H., 1970, 'Transport Equation in Turbulence,' Phys. Fluids, pp. 2634-2649 https://doi.org/10.1017/S0022112091000101
  15. Launder, B.E., 1988, 'On the Computation of Convective Heat Transfer in Complex Turbulent Flow,' J. Heat Transfer, Vol. 110, pp. 1112-1128 https://doi.org/10.1115/1.3250614
  16. Shima, N., 1998, 'Low-Reynolds-Number Second-Moment Closure without Wall-Reflection Redistribution Terms, Int. J. Heat Fluid Flow, Vol. 19, pp. 549-555 https://doi.org/10.1016/S0142-727X(98)10012-7
  17. Eggels, J.G.M., Boersma, B.J. and Nieuwstadt, F.T.M., 1994, 'Direct and Large-eddy Simulations of Turbulent Flow in an Axially Rotating Pipe,' Lab. for Aero- and Hydrodynamics, Delft Univ. of Technology, Delft, The Netherlands

Cited by

  1. Algebraic Modeling of the Turbulent Heat Fluxes Using the Elliptic Blending Approach—Application to Forced and Mixed Convection Regimes vol.88, pp.1-2, 2012, https://doi.org/10.1007/s10494-011-9366-8