DOI QR코드

DOI QR Code

Tx-Leakage Signal Blocking System in RFID System

단일 안테나를 사용하는 RFID에서의 Phase Shifter를 이용한 TX Leakage 제거 방식

  • Jeon, Bu-Won (Department of Electronic Engineering, Kookmin University) ;
  • Bae, Jae-Hyun (Department of Electronic Engineering, Kookmin University) ;
  • Roh, Hyoung-Hwan (Department of Electronic Engineering, Kookmin University) ;
  • Joung, Myoung-Sub (Department of Electronic Engineering, Kookmin University) ;
  • Park, Jun-Seok (Department of Electronic Engineering, Kookmin University)
  • 발행 : 2007.08.31

초록

Rx and Tx signal use same band in RFID. Then RFID system is not used duplexer and used coupler. RFID system have problem about Rx part to Tx leakage signal because that Rx signal port is Tx signal port's Isolation port. We proposal using phase shifter Tx leakage signal decrease than other RFID system. It is same signal Tx signal port's coupling port and isolation port signal except amplitude and phase. So if make coupling signal and isolation signal is in all same signal. We cancel Tx leakage signal used coupling port. And verification about ADS2006.

RFID 시스템에서는 현재 같은 주파수 대역에서 송신 단과 수신 단이 사용되며, 이에 따라 듀플렉서를 사용할 수 없게 되며 커플러를 사용하게 된다. 커플러를 사용함으로써 송신 누설 신호는 수신 단으로 직접적으로 영향을 주며, 이에 따라 태그의 인식 거리가 제한되는 부정적인 영향을 미치게 된다. 본 논문에서는 Rx 단으로 직접 적으로 영 향을 주는 Tx 누설 신호를 감쇄시키는 방법을 소개하고 ADS2006 시뮬레이션으로 이를 검증하였다

키워드

참고문헌

  1. Microwave Engineering. David M. Pozar
  2. 'Varactor SPICE models for RF VCO applications', APN1004, Alpha lndustries, 1997