Fabrication and Performance Test in Stacks up to 1kW Planar Solid Oxide Fuel Cell

1kW 평판형 SOFC 스택제작 및 성능평가

  • 조남웅 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 황순철 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 한상무 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 김영우 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 김승구 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 전재호 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 김도형 (포항산업과학연구원(RIST) 연료전지프로젝트) ;
  • 전중환 (포항산업과학연구원(RIST) 연료전지프로젝트)
  • Published : 2007.09.20

Abstract

Stacks of solid oxide fuel cell with 1kW max power performance were designed on planar type employing anode-supported cells and metallic interconnects. The stacks composed of 3-cells, 8-cells, and 16-cells were fabricated and tested in serials by using anode-supported cells purchased from Indec, and sealants/interconnects prepared at RIST. In the performance test of the final 16-cells stack, OCV was recorded to be 16.7V. The peak power and the power density showed 1 kW, $0.77W/cm^2$ at $820^{\circ}C$, respectively. In addition, the long-term degradation rate of the power exhibited 2.25 % during 500h at $750^{\circ}C$.

Keywords