동시냉난방 열펌프 시스템의 운전모드별 성능특성에 관한 실험적 연구

Experimental Study on the Performance Characteristics of a Simultaneous Heating and Cooling Heat Pump System at Each Operating Mode

  • 강훈 (고려대학교 기계공학과) ;
  • 이선일 (고려대학교 기계공학과 대학원) ;
  • 주영주 (고려대학교 기계공학과 대학원) ;
  • 정현준 (고려대학교 기계공학과 대학원) ;
  • 김용찬 (고려대학교 기계공학과) ;
  • 최종민 (한밭대학교 기계공학과)
  • Kang, Hoon (Department of Mechanical Engineering, Korea University) ;
  • Lee, Sun-Il (Graduate School of Mechanical Engineering, Korea University) ;
  • Joo, Young-Ju (Graduate School of Mechanical Engineering, Korea University) ;
  • Chung, Hyun-Joon (Graduate School of Mechanical Engineering, Korea University) ;
  • Kim, Yong-Chan (Department of Mechanical Engineering, Korea University) ;
  • Choi, Jong-Min (Department of Mechanical Engineering, Hanbat National University)
  • 발행 : 2007.10.10

초록

The cooling load in winter season is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, a 4-room simultaneous heating and cooling heat pump system was designed and its performance was measured at each operating mode. The system used R-410A and adopted variable speed compressor. The problems on the designed system were analyzed and defined. In addition, the solutions of the problems were suggested to improve system efficiency and to obtain the stable operation.

키워드

참고문헌

  1. Nagatomo, S., 1998, Positive displacement compressor technology for air conditioners, Transactions of the JSRAE, Vol. 15, No.4, pp. 305-326
  2. Han, D. and Kwon, H., 1999, Zone temperature control of the multi -type heat pump system, Proceedings of the SAREK, pp. 611-616
  3. Outtagarts, A., 1997, The transient response of an evaporator feed through an electronic expansion valve, Int. J. of Energy Research, Vol. 21, pp. 793-807 https://doi.org/10.1002/(SICI)1099-114X(199707)21:9<793::AID-ER297>3.0.CO;2-P
  4. Murphy, F. T., Low, R. E., Gilbert, B. E., Linton, J. W., Snelson, W. K and Hearty, P. E., 1995, Comparison of R407C and R410A with R22 in a 10.5 kW residential central air-conditioner, Proceeding of International CFC and Halon Alternative Conference, pp. 31-40
  5. Park, T.J., Lee, M. K., Jeong, J. H. and Chang, K.S., 2003, Comparison of per-formance variation between R-22 and R410A refrigeration systems, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 15, No.3, pp. 166-176
  6. ASHRAE Standard 37-78, 1978, Methods of testing for rating unitary air conditioning and heat pump equipment
  7. ASHARE Standard 51-75, 1975, Laboratory methods of testing fans for rating
  8. EN 14511-3, 2004, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling-Part 3: Test methods
  9. ISO/FDIS 15042, 2005, Multi-split air- conditioners and air-to-air heat pump- testing and rating for performance