한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제45권11호
  • /
  • Pages.744-749
  • /
  • 2008
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

시멘트의 초기수화에서 폴리머의 영향

The Influence of Polymer on the Early Hydration of OPC

  • 발행 : 2008.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition and polymer cement ratio. To overcome this problem, polymer-modified cement were prepared by varying polymer/cement mass ratio (P/C) with $0{\sim}20%$ and constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different polymer cement ratio. The results showed that the polymer cement paste have increased the viscosity in addition the amount of polymer dosage and the polymers is completed resulting in a reduced degree of hydration caused by different ion elution amount. Also we know that the reactants is calcium acetate as a results of chemical reaction between acetate group in EVA which is hydrolysis in water and $Ca^{2+}$ ion during hydration of cement.

키워드

참고문헌

  1. Z. Su, J.A. Larbi and J.M.J.M. Bijen, "The Interface between Polymer-modified Cement Paste and Aggregates, Cem. Concr. Res., 21 983-90 (1991) https://doi.org/10.1016/0008-8846(91)90057-O
  2. Y. Ohama, "Polymer-based Admixtures," Cem. Concr. Compos., 20 189-212 (1998) https://doi.org/10.1016/S0958-9465(97)00065-6
  3. Y.Ohama, "Properties of Polymer-modified Mortars Using Powdered Emulsion," pp. 319-320, Polymer Concrete: Use, Materials, and Properties, Publication SP-89, American Concrete Institute, Detroit, 1985
  4. V.R.Riley, and I. Razl, "Polymer Additives for Cement Composites ; A Review," Composites(Guildford), 5 [1] 27- 33 (1974)
  5. H. Hashimoti and Y.Ohama, "Effect of Curing Methods on Strengths of Polymer-modified Concretes," J. of College of Eng., Nihon Univ., Serise, A., 9 113-19 (1978)
  6. S.N.Pareek, Y.Ohama, and K.Demura, "Adhesion Mechanism of Ordinary Vement Mortar to Mortar Substrates by Polymer Dispersion Coatings," pp. 442-50, Proceeding of the 6th International Congress on Polymer in Concrete, Beijing, 1990
  7. Y.Ohama, K.Demura, and Y.Jo, "Adhesion of Epoxy Mordified Mortars without Hardener," pp. 1358-63, 4th Japan International SAMPE Symposium. Tokyo, 1995
  8. Y.K. Jo, W.S. Jeon, and Y.S. Soh, "An Experiental Study on the Effect of Curing Conditions on Improvement in Strength of Polymer Modified Mortar," Review of Architecture and Building Sci., 14 [3] 335-44 (1998)
  9. Wan-Ki Kim, "Development of Polymer Cement Mortar Modified with Redispersible Powder Polymer(in Jpn.)," pp. 3-136, Ph. D. Thesis, Japan University, Japan, 1997
  10. D.A. Silva, V.M. John, J.L.D. Ribeiro, and H.R. Roman "Pore Size Distribution of Hydrated Cement Pastes Modified with Polymers," Cem. Conc. Res., 31 1177-84 (2001) https://doi.org/10.1016/S0008-8846(01)00549-X
  11. P.-H. Park, "A Study on the Adhesives Properties of Wood Flooring based on Polymer Cement(in Korean)," Review of Architecture and Building Science, 21 [2] 471-74 (2001)