DOI QR코드

DOI QR Code

Effect of Shell Structure of Artificial Lightweight Aggregates on the Emission Rate of Absorbed Water

인공경량골재의 표피층 구조가 흡수된 물의 방출속도에 미치는 영향

  • Published : 2008.11.30

Abstract

The artificial aggregates with dense surface layer (shell) was fabricated and the dependence of water emission rate upon the shell structures was studied. The EAF dust containing many flux components and waste white clay with ignition loss of above 48% were used as for liquid phase and gas forming agents during a sintering process respectively. In addition, the shell structure was modified with various processes and the modification effect on water emission rate was analyzed. The pores under $10{\mu}m$ were found in the sintered artificial light aggregates and disappeared by incorporating to a bigger pore during re-sintering. The water emission rate in an initial step depended on a void content of aggregates filled in a bottle rather than a shell structure. But, after 7 days where the water emission of the aggregate with a shell is above 40%, the shell of aggregates suppressed the water emission. The core of aggregates was exposed and most shell was lost when crushed to smaller size so, the ability for suppressing water emission of the crushed aggregates decreased. The activation energy for the water emission was $3.46{\pm}0.25{\times}10^{-1}$J/mol for the most specimens showing that the activation energy is irrelevant to the pore size distribution and shell structure.

Keywords

References

  1. T. Y. Lo and H. Z. Cui, "Effect of Porous Lightweight Aggregate of Strength of Concrete," Mater. Lett., 58 [6] 916-19 (2004) https://doi.org/10.1016/j.matlet.2003.07.036
  2. T. Y. Lo, H. Z. Cui, and Z. G. Li, "Influence of Aggregate Pre-wetting and Fly ash on Mechanical Properties of Lightweight Concrete," J. Waste Management, 24 [4] 333-38 (2004) https://doi.org/10.1016/j.wasman.2003.06.003
  3. D. W. Kim, K. H. Cho, C. H. Park, H. Kang, I. S. So, and B. H. Kwack, "Effect of Substrates on the Growth of Cymbidium goeringii and Cymbidium 'Moon Venus' Seedlings," J. Kor. Soc. Hort. Sci., 38 749-53 (1997)
  4. H. J. Lee, Y. T. Kim, G. G. Lee, J. H. Kim, and S. G. Kang, "Properties of Artificial Aggregate for Orchid culture Fabricated from Solid Wastes," Mater. Sci. Forum., 544-545 601-4 (2007)
  5. Y. J. Kwon, K. G. Lee, Y. T. Kim, Y. J. Kim, S. G. Kang, J. H. Kim, and M. S. Park, "Effect of Additives and Sintering Method on the Properties of Light Aggregate Prepared from EAF Dust/Clay," J. Kor. Ceram. Soc., 40 309-16 (2003) https://doi.org/10.4191/KCERS.2003.40.3.309
  6. J. Park, Y. T. Kim, K. G. Lee, S. G. Kang, and J. H. Kim, "The Mechanism of Black core Formation," J. Kor. Cryst. Growh and Cryst. Tech., 15 [5] 208-15 (2005)
  7. C. K. Park, B. K. Kim, and K. H. Cho, "Utilization of Industrial By-products and Wastes for Manufacturing Hauyne Clinker and Properties of its Cement," J. Kor. Solid Wastes Eng. Soc., 15 191-95 (1998)
  8. J. O. Hong, S. G. Kang, K. G. Lee, Y. T. Kim, Y. J. Kim, J. H. Kim, and M. S. Park, "Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Clay," J. Kor. Ceram. Soc., 38 908-13 (2001)
  9. K. S. Kim, S. G. Kang, K. G. Lee, Y. T. Kim, and J. H. Kim. "The Effect of $Al_2O_3$ upon Firing Range of clay-EAF dust system Body," J. Kor. Ceram. Soc., 40 494-500 (2003) https://doi.org/10.4191/KCERS.2003.40.5.494
  10. Y. J. Kwon, Y. T. Kim, K. G. Lee, S. G. Kang, J. H. Kim, and M. S. Park, "Lightweight Aggregate Bloating Mechanism of Clay/Incinerated Ash/Additive System," J. Kor. Ceram. Soc., 38 811-16 (2001)
  11. KS F 2505, Testing Method for the Unit Volume Weight and Void Content of Aggregates, Korean Standard Association, 2003
  12. James S. Reed, Introduction to the Principles of Ceramic Processing, pp. 23-5, John Wiley & Sons, New York, 1989

Cited by

  1. Water absorption characteristics of artificial lightweight aggregates preparedby pre-wetting vol.21, pp.2, 2011, https://doi.org/10.6111/JKCGCT.2011.21.2.082