Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction of Creep Deformation and Short Time Rupture Life of AZ31 Magnesium Alloy below 0.5Tm

0.5Tm 이하에서의 AZ31 마그네슘합금의 크리이프 변형과 단시간 파단수명예측

  • 강대민 (부경대학교 기계공학부) ;
  • 안정오 (부경대학교 기계공학부) ;
  • 전성호 (부경대학교 기계공학부) ;
  • 구양 (부경대학교 기계공학부) ;
  • 심성보 (부경대학교 기계공학부)
  • Published : 2008.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The initial strain, the applied stress exponent, the activation energy, and rupture time in AZ31 magnesium alloy have been measured in order to predict the deformation mechanism and rupture life of creep over the temperature range of 423-443K. Creep tests were carried out under constant applied stress and temperature, and the lever type tester and automatic temperature controller was used for it, respectively. The experimental results showed that the applied stress exponent was about 9.74, and the activation energy for creep, 113.6KJ/mol was less than that of the self diffusion of Mg alloy including aluminum. From the results, the mechanism for creep deformation seems to be controlled by cross slip at the temperature range of 423-443K. Also the higher the applied stress and temperature, the higher the initial strain. And the rupture time for creep decreased as quadratic function with increasing the initial strain in double logarithmic axis.

Keywords

References

  1. J. Polmear, 1991, Proceedings of International Conference on Recent Advances in Science and Engineering of Light Metal, Japan Inst. Light Metals, p. 201
  2. W. F. Sheerly, R. R. Nash, 1960, Trans Metall. Soc. AIME, Vol.218, p. 416
  3. W. Blum, et. al., 2003, Creep Resistance and Creep Kinetics of Mg-alloys, Proceedings of the 6th International Conference Magnesium Alloys and their Applications, pp. 62-67
  4. C. Sheldon Roberts, 1958, Magnesium and Its Alloys, John and Sons, Inc., pp. 158-159
  5. J. P. Eum, S. G. Lim, B. Y. Hur., 1999, Development of Mg-Zn-(Mn, Ca) Alloy, Korea Inst. of Casting, Vol. 19/1, pp. 7-14
  6. O. D. Sherby, J. L. Lytton, J. E. Dorn, 1957, Activation Energies for Creep of high-Purity Aluminum, Acta Metallurgica, Vol.5, pp. 219-227 https://doi.org/10.1016/0001-6160(57)90169-4
  7. G. Schoek, A. Seeger, 1955, Defect in crystalline solids, London Physics Society of London, pp. 340-346
  8. A. Seeger, 1954, The Temperature Dependence of the Critical Shear Stress and of Work Hardening of Metal Crystals, Phil.Mag., Vol.45, pp. 771-773 https://doi.org/10.1080/14786440708520489