On the Beam Focusing Behavior of Time Reversed Ultrasonic Arrays Using a Multi-Gaussian Beam Model

  • Jeong, Hyun-Jo (Division of Mechanical and Automotive Engineering, Wonkwang University) ;
  • Lee, Jeong-Sik (Division of Mechanical and Automotive Engineering, Wonkwang University) ;
  • Jeong, Yon-Ho (Division of Mechanical and Automotive Engineering, Wonkwang University) ;
  • Bae, Sung-Min (Division of Mechanical and Automotive Engineering, Wonkwang University)
  • Published : 2008.12.30

Abstract

One of the fundamental features of time reversal acoustic (TRA) techniques is the ability to focus the propagating ultrasonic beam to a specific point within the test material. Therefore, it is important to understand the focusing properties of a TR device in many applications including nondestructive testing. In this paper, we employ an analytical scheme for the analysis of TR beam focusing in a homogeneous medium. More specifically, a nonparaxial multi-Gaussian beam (NMGB) model is used to simulate the focusing behavior of array transducers composed of multiple rectangular elements. The NMGB model is found to generate accurate beam fields beyond the nonparaxial region. Two different simulation cases are considered here for the focal points specified on and off from the central axis of the array transducer. The simulation results show that the focal spot size increases with increasing focal length and focal angle. Furthermore, the maximum velocity amplitude does not always coincide with the specified focal point. Simulation results for the off-axis focusing cases do demonstrate the accurate steering capability of the TR focusing.

Keywords

References

  1. Azar, L., Shi, Y. and Wooh, S. C. (2000) Beam Focusing Behavior of Linear Phased Arrays, NDT&E International, Vol. 33, pp. 189-198 https://doi.org/10.1016/S0963-8695(99)00043-2
  2. Choi, B. K., Kim, B.-C., Sutin, A. and Sarvazyan, A. (2008) Ultrasonic Focused Waveform Generation Using Time Reversal Acoustic Focusing System, Journal of Mechanical Science and Technology, Vol. 22, pp. 699-707 https://doi.org/10.1007/s12206-007-1203-6
  3. Fink, M. (1992) Time Reversal of Ultrasonic Fields. I. Basic Principles, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, Vol. 39, pp. 555-566 https://doi.org/10.1109/58.156174
  4. Kim, H.-J., Song, S.-J., Thompson, R. B. and Kim, J.-H. (2006) Use of Time Reversal Techniques for Focusing of Ultrasonic Array Transducer Beams, Journal of the Korean Society for Nondestructive Testing, Vol. 26, pp. 190-197
  5. Krautkramer, J. and Krautkramer, H. (1990) Ultrasonic Testing of Materials, 4th Eds., Springer- Verlag, New York, NY
  6. Schmerr, L. W. (1998) Fundamentals of Ultrasonic Nondestructive Evaluation - A Modeling Approach, Plenum Press, New York, NY
  7. Schmerr, L. W. and Song, S.-J. (2007) Ultrasonic Nondestructive Evaluation Systems: Models and Measurements, Springer, New York, NY
  8. Song, S.-J., Shin, H. J. and Jang, Y. H. (2000) Calculations of Radiation Field of Phased Array Transducers Using Boundary Diffraction Wave Model, in Proc. 15th WCNDT, Rome, Italy, Oct. 15-20
  9. Tsogka, C. T. and Papanicolaou, G. (2002) Time Reversal through a Solid-Liquid Interface and Super-Resolution, Inverse Problems, Vol. 18, pp. 1639-1657 https://doi.org/10.1088/0266-5611/18/6/314
  10. Wen, J. J. and Breazeale, M. A. (1988) A Diffraction Beam Field Expressed as the Superposition of Gaussian Beams, Journal of the Acoustical Society of America, Vol. 83, pp. 1752 -1756 https://doi.org/10.1121/1.396508
  11. Zhao X. and Gang, T. (2008) Nonparaxial Multi-Gaussian Beam Models and Measurement Models for Phased Array Transducers, Articles in Press, Ultrasonics