Abstract
Line type rigid bearings for Open-Steel-Plate-Girder railway bridges have several problems in service, and they are unstable structurally. A series of lateral resistance tests were performed for a retrieved line type bearing. A spherical bearing with advanced maintenance-capability and a device to resist the up-lift was developed and replaced the existing ones. An experiment of maintenance for a new spherical bearing under real Open-Steel-Plate-Girder bridge was conducted and their good maintenance performance was proved. Also, a test against up-lift was performed for the bearing. The dynamic behavior of the bridge was measured and analyzed for the two cases of the existing and replaced bearings. Therefore, the suitability of the new spherical bearings on the railway bridge was improved.
철도판형교에 있어 선받침은 사용 중에 많은 문제를 야기하고 있으며, 구조적으로 불안정하다. 기존 선받침의 문제점을 파악하기 위해 수평저항능력 실험을 수행하였다. 유지보수에 용이하고 들림현상에 저항할 수 있는 개선된 스페리칼받침을 개발하여 기존받침을 교체하였다. 개선된 스페리칼받침의 교체성능 실험과 부반력 저항능력 실험이 수행되어, 유지보수 성능 및 부반력 저항능력이 증명되었다. 선받침 상태 및 스페리칼받침으로 교체된 상태에서 판형교의 동적 거동 및 각 교량받침의 동적 거동을 계측하여 거동의 차이를 분석하였다. 이러한 실험 및 분석을 통하여 개선된 스페리칼받침이 철도 판형교에 교량받침으로 사용하기에 적합함을 알 수 있었다.