Journal of the Korean Home Economics Association (대한가정학회지)

The Korean Home Economics Association (대한가정학회)
권호 표지

Development of Men Slacks Pattern Using 3D Scan Data

3차원 인체형상 스캔데이터를 이용한 남자 바지패턴 설계

  • Sohn, Boo-Hyun (Department of Clothing & Textiles, Chungnam National University)
  • Published : 2008.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

Keywords

References

  1. 강여선, 곽영철(2005), 여자 기성복 기본패턴 설계. 서울: 수학사
  2. 김효숙(1998). 여성바지 패턴에 관한 연구(1). 복식문화연구, 6(3), 418-427
  3. 나가자와 스스무(1999). 의복과 체형. 서울: 예학사
  4. 남윤자(2005). 3차원 형상자료를 이용한 2차원 평면 pattern 제도법 개발. 2005년 표준화부문 연구용역사업 보고서
  5. 남윤자, 이형숙(2000). 남성복 연구. 서울: 교학연구사
  6. 손부현, 김소영(2008). 3차원을 이용한 중년비만여성용 스커트 설계방법론 연구. 복식문화학회지. 6(5), 852-862
  7. 오선희(2006). 서양의복구성. 서울: 예학사
  8. 윤미경(2008). 3차원 인체형상을 활용한 여성 팬츠 스타일에 따른 대량 개별맞춤 패턴연구. 서울대학교 박사학위 청구논문
  9. 윤미경, 남윤자, 최경미(2007). 3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구. 한국의류학회지, 31(5), 692-704 https://doi.org/10.5850/JKSCT.2007.31.5.692
  10. 이승렬(2004), 이승렬의 패턴이야기. 서울: 기술과 감성
  11. 정연희, 홍경희(2006). 3D 스캔 데이터를 활용한 밀착 패턴 원형 개발. 한국의류학회지, 30(1), 157-166
  12. 함옥상(1981). Slacks의 機能性에 關한 人間工學的硏究. 대한가정학회지, 19(2), 151-163
  13. Efrat, S.(1982). The development of a method for generating patterns for garments that conform to the shape of the human body. Doctoral dissertation, Leicester Polytechnic, U.K.
  14. Robinette, K. M.(2002). Ergonomics in Design; The Quarterly of Human Factors Applications, Human Factor and Ergonomics Society, 8(3), 17-23