Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Torque Distribution Control of 3RRR Redundant Parallel Robot

여유구동 3RRR 병렬로봇의 힘분배 제어에 관한 연구

  • Published : 2008.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In the redundant actuation system which has more actuators than a system's mobility, there are various method to determine actuated torques because those are not determined uniquely. This paper presents a torque distribution method using weighted-pseudoinverse to optimize the maximum torque of various actuated inputs of the redundant system. The various weighting factor of weighted-pseudoinverse is studied to reduce maximum actuated torque. This method is experimentally applied to 3RRR parallel robot, which shows that presented method can efficiently reduce the maximum actuated torque.

Keywords

References

  1. Lee, S. H., Yi, B. J. and Kwak, Y. K., 'Performance Analysis and Optimal Actuator Sizing for Anthropomorphic Robot Modules with Redundant Actuation,' Journal of the Korean Society of Mechanical Engineers, Vol. 19, No. 1, pp. 181-192, 1995
  2. Kim, S. B., 'Operational quality analysis of parallel manipulators with actuation redundancy,' IEEE International Conference on Robotics and Automation, pp. 2651-2657, 1997
  3. Yi, B. J., Kim, W. K. and Kim, D. K., 'Analysis for Fault Tolerant Capabilities of Robots with Kinematic and Force Redundancies,' Journal of the Korean Society of Mechanical Engineers, Vol.19, No. 11, pp. 2927-2938, 1995
  4. Park, D. I., Lee, S. H. and Kim, S. H., 'Torque distribution using a weighted pseudoinverse in a redundantly actuated mechanism,' VSP and Robotics Society of Japan, Vol. 17, No. 8, pp. 807-820, 2003
  5. Kock, S. and Schumacher, W., 'A Parallel x-y Manipulator with Actuation Redundancy for High-Speed and Active-stiffness Application,' IEEE International Conference on Robotics and Automation, Vol. 3, pp. 2295-2300, 1998
  6. Park, J. H, Chung, W. K. and Youm, Y. G., 'Weighted Decomposition of Kinematics and Dynamics of Kinematically Redundant Manipulators,' IEEE International Conference on Robotics and Automation, Vol. 1, pp. 480-486, 1996
  7. Tsai, L. W., 'Robot Analysis - The Mechanics of Serial and Parallel Manipulators,' John Wiley & Sons INC, pp. 223-231, 1999
  8. Kim, T. J., Yi, B. J. and Suh, H., 'Load Distribution Algorism and Experimentation for a Redundantly Actuated, Singularity-free 3-DOF Parallel Haptic Device,' IEEE/RSJ International Conference on Intelligent Robot and system, Vol. 3, pp. 2899-2904, 2004
  9. Lee, S. H., 'Control of active stiffness and impact disturbance by redundantly actuated mechanism,' Ph. D. Thesis, KAIST, 2001
  10. Ropponen, T. and Nakamura, Y., 'Singularityfree parameterization and performance analysis of actuation redundancy,' IEEE International Conference on Robotics and Automation, Vol. 2, pp. 806-811, 1990
  11. Kim, J. S., Kim, W. K. and Cho, W., 'Study on the Precision Characteristics of a Planar 3 Degrees-of-Freedom Parallel Mechanism,' Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 781-786, 1996
  12. Ryu, G. H. and Cho, B. K., 'A Study on the Kinematic Analysis of a 6-DOF Parallel Robot Manipulator,' Journal of the Korean Society for Precision Engineering, Vol. 12, No. 5, pp. 149-156, 1995
  13. Jeong, J. I. and Kim, J. W, 'Kinematic Calibration Method for Redundantly Actuated Parallel Mechanisms,' Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 355-360, 2002