Test on the Structural Performance of the TOX Deck plate - Evaluation of Structural Safety during Construction Stage -

무용접 압접 데크플레이트의 구조성능에 관한 실험 - 시공단계에서의 구조안전성 평가 -

  • 오상훈 (부산대학교) ;
  • 김영주 (고려대학교 건축.사회환경공학과 BK21) ;
  • 윤명호 (공주대학교 공과대학 건축학부)
  • Received : 2008.08.16
  • Accepted : 2008.12.10
  • Published : 2008.12.10

Abstract

Owing to the decreased work term and the convenience of construction work in Korea, the steel deck plate system has been widely used in the construction field. Most of all, due to its good stiffness and economic consideration, the steel-wire-integrated deck plate system (or truss deck plate system) has become very popular in recent years. But although it has many advantages, the truss deck plate system has a critical defect: it gets rusty in the welding joints between the lattice steel wire and the deck plate, resulting in the cracking of such welding joints and water leakage. To address these problems, a new type of truss deck plate system, which need not be welded and does not rust, was proposed herein: the TOX deck plate system. In this study, tests were conducted on 15 specimens to evaluate the structural safety of the proposed deck plate system during the construction stage. The test parameters were as follows: the depth of the slab the length of the span the diameters of the top, bottom, and lattice steel wire and the material properties of the zinc-coated steel sheets. The test results show that the TOX deck plate system can guarantee structural safety owing to its deflection and strength.

철골 데크플레이트 시스템은 시공의 편의성과 공기단축 때문에 건설현장에서 널리 사용되고 있으며, 그중에서도 특히 철선과 데크플레이트가 혼합된 시스템 (트러스 데크플레이트 시스템)이 우수한 구조적 성능과 및 경제성에 의해서 최근에 매우 각광을 받고 있다. 그러나 트러스 데크플레이트 시스템은 많은 장점에도 불구하고 래티스 철선과 데크플레이트에 용접을 하므로 철판이 용접부위에서 녹이 발생하게 되고, 용접부의 균열과 이에 따른 누수가 발생하는 등의 결점이 있다. 이러한 문제를 해결하기 위해서 용접을 하지 않고 녹발생이 없는 새로운 데크플레이트 시스템, 즉, TOX 데크플레이트 시스템의 적용성을 검토하였다. 본 연구에서는 15개의 실험을 통해 시공단계에서의 데크플레이트 시스템의 구조적 안전성을 평가하고자 한다. 실험변수는 슬래브의 두께, 경간의 길이, 상부, 하부 및 래티스 철선의 직경 그리고 아연도금강판 재료 등이다. 실험결과 제안된 TOX 데크플레이트 시스템은 처짐과 내력에 있어서 구조적으로 충분히 안전성이 있는 것으로 보인다.

Keywords

References

  1. 대한건축학회 (1998). 합성데크 바닥구조 설계기준(안) 및 해설
  2. 대한건축학회 (1998). 합성데크 바닥구조 시공지침서
  3. 대우건설기술연구소 (1999). TEC-BEAM 구조실험보고서
  4. 문태섭, 배종우 (1999). 신형상의 합성용 데크플레이트를 사용한 합성슬래브의 구조적 거동에 관한 해석적 연구, 한국강구조학회 논문집, 제11권 2호, pp. 575-586
  5. 엄철환, 윤명호 (1999). 합성슬래브용 신형장 데크플레이트의 전단부착강도에 관한 실험적 연구, 한국강구조학회 논문집, 제11권 6호, pp. 671-678
  6. 이수권, 이용재 (2007). 철선일체형 데크플레이트 시스템의 구조안전성 평가, 대한건축학회 논문집, 제23권 11호, pp. 43-50
  7. (주)제일데크노스 (2005). 제일 NT DECK 구조설계편람
  8. 한국건축구조기술사회 (2005). 스피드데크 시스템의 구조성능 평가에 관한 연구
  9. 오상훈, 장인화, 배규웅, 허병욱, 양명숙 (2001). 신형상의 합성용 평데크플레이트(ACE-DECK)의 휨성능에 대한 실험적 연구, 한국강구조학회 논문집, 제13권 3호, pp. 265-277
  10. 허병욱, 배규웅, 문태섭 (2004). 매입형(슬림플로어) 합성보의 휨성능 평가-춤이 깊은 데크플레이트와 비대칭 H형강 철골보, 한국강구조학회 논문집, 제16권 2호, pp.235-245
  11. ASCE Standards (1992). Standard for the structural design- Composite slabs, ANSI/ASCE3-91
  12. ANSI (1986). Cold formed steel design manual