구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)

  • 제24권1호
  • /
  • Pages.113-127
  • /
  • 2008
  • /
  • 2384-4353(pISSN)
  • /
  • 2384-4272(eISSN)
대한턱관절교합학회 (Korean Academy of Stomatognathic Function and Occlusion)
권호 표지

지르코니아-전장도재 계면의 전단결합강도에 대한 ZirLiner® 적용과 분사처리의 영향에 관한 연구

Effect of Application of ZirLiner® and Blasting Treatments on Shear Bond Strength of Zirconia-Veneered Porcelain Interface

  • 신영호 (원광대학교 치과대학 보철학교실) ;
  • 이유나 (단국대학교 치과대학 생체재료학교실) ;
  • 이해형 (단국대학교 치과대학 생체재료학교실) ;
  • 동진근 (원광대학교 치과대학 보철학교실) ;
  • 오상천 (원광대학교 치과대학 보철학교실)
  • Shin, Young-Ho (Department of Prosthodontics, College of Dentistry, Wonkwang University) ;
  • Lee, Yu-Na (Department of Biomaterials Science, College of Dentistry, Dankook University) ;
  • Lee, Hae-Hyoung (Department of Biomaterials Science, College of Dentistry, Dankook University) ;
  • Dong, Jin-Keun (Department of Prosthodontics, College of Dentistry, Wonkwang University) ;
  • Oh, Sang-Chun (Department of Prosthodontics, College of Dentistry, Wonkwang University)
  • 투고 : 2008.01.13
  • 심사 : 2008.03.25
  • 발행 : 2008.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구의 목적은 지르코니아 도재 표면의 전단 결합 강도에서 $ZirLiner^{(R)}$와 블라스팅 처리의 적용 효과를 평가하기 위한 것이다. 60개의 무색의 지르코니아 판과 30개의 색이 있는 지르코니아 판이 규격화되고 연마, 글래스블라스팅, 알루미나블라스팅, 그리고 zirliner 같은 블라스팅 처리를 적용시키는 것에 따라 10개씩 9개의 그룹으로 나누어졌다. 시편을 고정대에 위치하고 만능시험기로 전단력을 측정하였다. 파절된 견본의 파절 표면은 SEM으로 검사되었다. 각 군별 시편을 통계처리하여 그 결과를 비교하였다.

The purpose of this study was to evaluate effect of application of $ZirLiner^{(R)}$ and blasting treatments on shear bond strength of zirconia-veneered porcelain interface. 60 uncolored zirconia plates and 30 colored zirconia plates were fabricated and divided into nine groups of 10 according to blasting treatment such as as-ground, glass blasting and alumina blasting and zirliner application. Veneering porcelains were built up over the center of the treated zirconia ceramic surface using jig and fired according to the manufacturers' instructions. Each specimen was completely embedded in acrylic resin. The specimens were placed in a mounting jig and subjected to shear force by a universal testing machine. Load was applied at a crosshead speed of 0.5㎜/min until failure. Average shear strengths were analyzed with two-way analysis of variance and one-way analysis of variance and the Duncan's post-hoc test. The fracture surfaces of the failed specimens were examined by SEM. The obtained results were as follows: 1. Depending on surface treatment by blasting, the degree of roughness is revealed in the order of Glass-blasted, As-ground, and Alumnia-blasted. The roughness average of uncolored and colored zirconia ceramic were not significantly different from blasting treatments. 2. In uncolored zirconia ceramic, the shear bond strength were not significantly different from blasting treatments. However, the shear bond strength were significantly different from Zirliner application. 3. Used ZirLiner, mean shear bond strength of colored zirconia was lower than uncolored zirconia. Especially, mean shear bond strength of colored zirconia was quite low with alumina-blasting treatment. 4. SEM analysis showed that veneered porcelain failed in zirconia ceramic interface and there was no cohesive failure.

키워드

과제정보

연구 과제 주관 기관 : 한국과학재단

참고문헌

  1. Rosenblum MA, Schulman A. A review of all- ceramic restorations. J Am Dent Assoc 1997;128: 297-307 https://doi.org/10.14219/jada.archive.1997.0193
  2. Komine F, Tomic M, Gerds T, Strub JR. Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent 2004;92:359-364 https://doi.org/10.1016/j.prosdent.2004.07.018
  3. Kim CH, Jeon YC, Jeong CM, Lim JS. Effect of surface treatments of zirconia ceramic on the bond strength of resin cements. J Korean Acad Prosthodont 2004;42(4):386-396
  4. Chen HY, Hickel R, Setcos JC, Kunzelmann KH. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. J Prosthet Dent 1999;82(4):468-475 https://doi.org/10.1016/S0022-3913(99)70036-3
  5. Aboushelib M, De Jager N, Pallav P, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 2005;21:984-991 https://doi.org/10.1016/j.dental.2005.03.013
  6. Thompson JY, Anusavice KJ, Naman A, Morris HF. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res 1994;73:1824-1832 https://doi.org/10.1177/00220345940730120601
  7. Thompson G. Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater 2000;16:235-243 https://doi.org/10.1016/S0109-5641(00)00005-1
  8. Pallis K, Griggs JA, Woody RD, Guillen GE, Miller AW. Fracture resistance of three all-ceramic restorative systems for posterior applications. J Prosthet Dent 2004;91:561-569 https://doi.org/10.1016/j.prosdent.2004.03.001
  9. Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil 2004;31: 682-688 https://doi.org/10.1111/j.1365-2842.2004.01284.x
  10. Scherrer SS, Robert Kelly J, Quinn GD, Xu K. Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis. Dent Mater 1999;15:342-348 https://doi.org/10.1016/S0109-5641(99)00055-X
  11. Kelly J, Campbell S, Bowen H. Fracture-surface analysis of dental ceramics. J Prosthet Dent 1989;62:536-541 https://doi.org/10.1016/0022-3913(89)90075-9
  12. Albakry M, Guazzato M, Swain MV. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent 2003;31:181-188 https://doi.org/10.1016/S0300-5712(03)00025-3
  13. Traini T. Electroforming technology for ceramometal restoration. QDT 1995:21-29
  14. Kwon HB, Yim SH. A qualitative analysis of bonding between electroformed surface and veneering ceramics. J Korean Acad Prosthodont 2000;38: 328-335
  15. Yamamoto M. Metal-Ceramics. Quintessence. Pub. Co. Tokyo, 1985
  16. Wirz J, Hoffman A. Electroforming in restorative dentistry: new dimensions in bilologically based protheses. Quintessence Pub. Co. 1999
  17. Guggeberger R. Rocatec system-Adhesion by tribochemical coating. Dtsch Zahnarztl Z 1989;44: 874-876
  18. De Jager N, Pallav P, Feilzer AJ. The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater 2005;21:242-251 https://doi.org/10.1016/j.dental.2004.03.013
  19. Southan DE, Jorgensen KD. Faulty in porcelain jacket crowns. Aust Dent J 1973;18:152-156 https://doi.org/10.1111/j.1834-7819.1973.tb03452.x
  20. Grey NJA, Wilson MA. In vitro comparison of conventional crowns and a new all-ceramic system. J Dent 1992;21:47-51 https://doi.org/10.1016/0300-5712(93)90051-Q
  21. Josephson BA, Schulman A, Dunn ZA, Hurwitz W. A compressive strength study of complete ceramic crowns. Part II. J Prosthet Dent 1991;65:388-391 https://doi.org/10.1016/0022-3913(91)90230-T
  22. Probster L. Compressive strength of two modern all-ceramic crowns. Int J Prosthodont 1992;5:409- 414
  23. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns. Int J Prosthodont 1990;3:159-168
  24. Tinschert J, Natt G, Mautsch W, Spiekermann H, Anusavice KJ. Marginal fit of alumina and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 2001;26:367-374
  25. Wagner WC, Chu TM. Biaxial flexural strength and indentation fracture toughness of there new dental core ceramics. J Prosthet Dent 1996;76:140-144 https://doi.org/10.1016/S0022-3913(96)90297-8
  26. Tinschert J, Zwez D, Marx R, Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 2000;28:529-535 https://doi.org/10.1016/S0300-5712(00)00030-0
  27. Shimizu K, Oka M, Kumar P, Kotoura Y, Yamamuro T, Makinouchi K, et al. Timedependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 1993;27:729-734 https://doi.org/10.1002/jbm.820270605
  28. Luthardt RG, Holzhuter M, Sandkuhl O, Herold V, Schnapp JD, Kuhlisch E, et al. Reliability and properties of ground Y-TZP zirconia ceramics. J Dent Res 2002;81:487-491 https://doi.org/10.1177/154405910208100711
  29. Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide partially stabiliwed zirconia. J Biomed Mater Res 1989;23:45-61 https://doi.org/10.1002/jbm.820230105
  30. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999;15:426-433 https://doi.org/10.1016/S0109-5641(99)00070-6
  31. Willamnn G, Fruh HJ, Pfaff HG. Wear characteristics of sliding pairs of zirconia(Y-TZP) for hip endoprostheses. Biomaterials 1996;17:2157-162 https://doi.org/10.1016/0142-9612(96)00042-7
  32. Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent. 2004;91: 349-355 https://doi.org/10.1016/j.prosdent.2004.02.009
  33. 류경희, 이선형. Dicor와 수종 전장도재간의 전단결합강도. 대한치과보철학회지. 1993;31:165-179
  34. 오상천, 이해형, 신미란, 박광수. 전부도재수복물을 위한 수종의 코어 세라믹의 반투명도 및 색 안정성. 대한치과턱관절기능교합학회지 2007;23: 157-170
  35. Huang H, Zhang FQ, Sun J, Gao L. Effect of three kinds of rare earth oxides on chromaticity and mechanical properties of zirconia ceramic. Zhonghua Kou Qiang Yi Xue Za Zhi. 2006;41:327-330
  36. 오상천, 이해형, 신미란, 이일권. 전부도재수복물을 위한 유색 및 무색 지르코니아 세라믹의 굴곡강도. 대한치과턱관절기능교합학회지 2007;23: 119-130
  37. Guazzato M, Proos K, Quach L, Swain MV. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 2004;25:5045-5052 https://doi.org/10.1016/j.biomaterials.2004.02.036
  38. Isgro G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;90:465-473 https://doi.org/10.1016/j.prosdent.2003.08.003
  39. Sundh A, Molin M, Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 2005;21:476-482 https://doi.org/10.1016/j.dental.2004.07.013
  40. Kelly JR, Nishimura I, Cambell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32 https://doi.org/10.1016/S0022-3913(96)90413-8
  41. Scherrer SS, Robert Kelly J, Quinn GD, Xu K. Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis. Dent Mater 1999;15:342-348 https://doi.org/10.1016/S0109-5641(99)00055-X
  42. Albakry M, Guazzato M, Swain MV. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent 2003;31:181-188 https://doi.org/10.1016/S0300-5712(03)00025-3
  43. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent Mater 2006;22: 857-863 https://doi.org/10.1016/j.dental.2005.11.014
  44. Kelly N, Asgar K, O'Brien JJ. Tensile strength determination of the interface between porcelain fused to gold. J Biomed Mat Res 1969;3:403 https://doi.org/10.1002/jbm.820030302
  45. Fleming GJP, El-Lakwah SFA, Harris JJ, Marquis PM. The influence of interfacial surface roughness on bilayered ceramic specimen perfomance. Dent Mater 2004;20:142-149 https://doi.org/10.1016/S0109-5641(03)00085-X
  46. Dündar M, Ozcan M, Gokce B, Comlekoglu E, Leite F, Valandro LF. Comparison of two bond strength testing methodolgies for bilayered all-ceramics. Dent Mater 2007;23:630-636 https://doi.org/10.1016/j.dental.2006.05.004
  47. Zhang Y, Lawn BR, Rekow ED, Thompson VP. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res Pt B Appl Biomater 2004;71B:381-386 https://doi.org/10.1002/jbm.b.30097