Experimental study on Static Behavior of H-beam prestressed with Multi-Stepwise TPSM

다단계 온도프리스트레싱 도입 강재보의 정적거동평가를 위한 실험적 연구

  • 안진희 (연세대학교 사회환경시스템공학부) ;
  • 정치영 (연세대학교 사회환경시스템공학부) ;
  • 김준환 (연세대학교 사회환경시스템공학부) ;
  • 김상효 (연세대학교 사회환경시스템공학부)
  • Received : 2008.01.07
  • Accepted : 2008.03.14
  • Published : 2008.04.10

Abstract

In this study, static loading tests were performed on H-beam specimens to assess the static behavior of H-beam prestressed with multi-stepwise thermal prestressing method (TPSM). The amount of induced thermal prestress and connection type were differentiated among the 400-mm-high and 6,000-mm-long H-beam specimens to evaluate their effect on the behavior of the beams. From the experimental results, it between the H-beam and the cover-plate increased in yielding load by 13~18%, whereas stiffness increased by 27~34%. In case of specimens with both bolting and welding connection, yie lding load increased by 18~29% and stiffness increased by 43~51%. Multi-stepwise initial stress distribution was also observed from the prestressed specimens, verifying the effectiveness of the multi-stepwise TPSM. By application of the multi-stepwise TPSM, a significant increase in yielding load and stiffness can be achieved, hence increasing sectional and prestressing efficiencies.

본 연구에서는 다단계 온도프리스트레싱이 도입된 강재보의 정적거동을 평가하기 위하여 H형강 시험체에 다단계 온도프리스트레싱을 도입한 후 정적 재하시험을 수행하였다. 도입한 온도 프리스트레싱력들의 차이 및 강재보와 커버플레이트 이음 형태에 따른 영향을 비교하기 위하여, 커버플레이트의 두께 및 커버플레이트와 강재보의 이음형식에 따라 높이 400mm, 길이 6,000mm의 시험체를 제작하였다. 정적재하 실험결과, 커버플레이트와 H형강을 볼트 이음하여 프리스트레싱한 시험체는 온도프리스트레싱이 도입되지 않은 시험체와 비교하여 항복하중은 13~18%, 강성은 27~34% 증가하였고, 볼트 및 용접 이음한 시험체는 항복하중이 18~29%, 강성이 43 ~51% 증가하는 것으로 나타났다. 또한 다단계 프리스트레싱의 도입으로 하중재하상태에서 시험체에 작용하는 응력상태가 다단계로 나타났다. 따라서 다단계 프리스트레싱의 도입은 강재보의 항복하중 및 강성을 증가시킬 수 있고, 단면 효율 및 프리스트레싱 효율의 증대가 가능할 것으로 판단된다.

Keywords

References

  1. 경용수, 안병국, 방진환, 김문영(2005), H형강과 고강도 강판으로 복합단면을 구성하는 프리스트레스트 플레이트거더의 개발, 한국강구조학회논문집, 한국강구조학회, 제17권 제5호, pp. 637-648.
  2. 김상효, 안진희, 김준환, 김형주(2006), 커버플레이트의 온도변형을 이용한 강구조물의 다단계 프리스트레싱, 한국강구조학회논문집, 한국강구조학회, 제18권 제6호, pp. 783-792.
  3. 김상효, 김준환, 안진희(2006), 다단계 온도프리스트레싱을 이용한 강거더교의 보강에 관한 연구, 한국강구조학회논문집, 한국강구조학회, 제18권 제6호, pp. 717-726.
  4. 박용걸, 박영훈, 이승용(2000), 외부 후 긴장 공법을 이용한 강합성보의 보강에 관한 연구, 한국강구조학회 논문집, 한국강구조학회, 제12권 제5호, pp. 594-558.
  5. 임성순, 정찬핵(2006), 프리스트레스된 압연강재보(H-BEAM)의 휨 거동에 대한 실험적 연구, 한국강구조학회 논문집, 한국강구조학회, 제18권 제2호, pp. 239-250.
  6. Dall'Asta A, Leoni G. (2002) Failure mechanisms of externally prestressed composite beams with partial shear connection, Steel Compos Struct Vol.2, No. 5, pp. 315-330. https://doi.org/10.12989/scs.2002.2.5.315
  7. LorencW, Kubica E. (2004) Nonlinear modeling of composite beams prestressed with external tendons, Archives Civil Mech Eng, Vol.4, pp. 83-93.
  8. Masahiro Sakano, Hironori Namiki, Syuji Yajima, Yasuhiro Koide, Hitoshi Furuta and Dan M. Frangopol. (2006) Monitoring of Steel Railway Floor Beams Prestressed by Steel Plates, Journal of Bridge Engineering, Vol.11, No. 6, pp. 681-687. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:6(681)
  9. Shiming C. and Ping G. (2005) Load carrying capacity of composite beams prestressed with external tendons under positive moment, Journal of Constructional Steel Research, Vol.61, pp. 515-530. https://doi.org/10.1016/j.jcsr.2004.09.004
  10. Saadatmanesh, H., Albrecht, P., and Ayyub, B.M. (1989) Experimental Study Prestressed Composite Beams, Journal of Structural Engineering, ASCE, Vol.115, No.9, pp.2348-2363. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:9(2348)
  11. Wojciech L. and Ernest K. (2006) Behavior of composite beams prestressed with external tendon: Experimental study, Journal of Constructional Steel Research, Vol.62, pp. 1353-1366. https://doi.org/10.1016/j.jcsr.2006.01.007