Performance Evaluation of Welded Joints for Single-Layer Latticed Domes through Joint Rigidity Test

단층 래티스 돔에 적용 가능한 용접 접합부의 휨실험을 통한 성능 평가

  • Received : 2008.07.04
  • Accepted : 2008.10.10
  • Published : 2008.10.10

Abstract

Joints of single-layer latticed domes show various flexural behaviors according to their shapes and connecting methods. Ball joints are relatively easy to apply and build while their rigidities are relatively small and have disadvantage in long span. Welded joints have many advantages in rigidity, internal force and long span. However few experimental studies have been performed. In this paper, improved welded joint for the single layer latticed domes was proposed through both analytical and experimental analyses. Length of inserted plates, thickness of inserted plates and hole of sub steel pipes were selected as parameters for experimental comparisons and defining the effects of the selected variables.

단층 래티스 돔에 사용되는 접합부는 그 형태나 접합방법에 따라 다양한 거동 특성을 지닌다. 볼 조인트의 경우, 다루기 쉽고 현장 적용에 유리하지만, 강성과 내력이 약하기 때문에 장스팬의 확보에 있어서 불리하다. 용접 접합부는 볼 조인트에 비해 강성과 내력이 우수하고, 장스팬을 확보할 수 있지만, 용접 접합부에 관한 연구 및 실험은 드문 실정이다. 본 연구에서는 단층 래티스 돔에 적용 가능한 용접 접합부를 제안하고, 이를 기존접합부와의 비교하기 위한 실험을 수행하였다. 또한 제안된 접합부에 대해 삽입 플레이트의 길이, 두께, 여장을 변수로 하여 각각의 변수에 의한 실험체의 거동의 변화를 살펴보았다. 실험을 통한 결과를 토대로 하여 새로운 형태의 용접 접합부를 제안하고자 한다.

Keywords

References

  1. 대한건축학회(1998), 강관구조 설계기준 및 해설, 대한건축학회.
  2. 박철호, 한상을(2003) 볼트 삽입식 볼 조인트의 휨 강성 평가에 관한 실험적 연구, 대한건축학회논문집 구조계, 대한건축학회, Vol.19, No.11, pp. 65-72.
  3. 한상을, 이진섭, 권현재(2001) 접합부의 특성을 고려한 볼 접합 단층 래티스 돔의 탄소성 좌굴해석, 대한건축학회논문집 구조계, 대한건축학회, Vol.17, No.6, pp.43-50.
  4. 日本建築學會(2004), ド-ム構造の技術レビユ- : 事例をとぢ して最新構造計技術をみる, 日本建築學會, 日本.
  5. Aitziber Lopez, Inigo Puente, Miguel A. Serna(2007) Direct evaluation of the buckling loads of semi-rigidly jointed single-layer latticed domes under symmetric loading, Engineering Structures, 29, pp.101-109. https://doi.org/10.1016/j.engstruct.2006.04.008
  6. Aitziber Lopez, Inigo Puente, Miguel A. Serna(2007) Numerical model and experimental tests on single-layer latticed domes with semi-rigid joints, Computers and Structures, 85, pp.360-374. https://doi.org/10.1016/j.compstruc.2006.11.025