Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Expansion Characteristics of the Hydrated Sodium Silicate

수화된 규산소다의 팽창 특성

  • Kong, Yang-Pyo (Department of Materials Science and Engineering, Chungnam National University) ;
  • Cho, Ho-Yeon (Department of Materials Science and Engineering, Chungnam National University) ;
  • Suhr, Dong-Soo (Department of Materials Science and Engineering, Chungnam National University)
  • Published : 2008.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Hydrated sodium silicate with 25 wt% water contents was synthesized by hydrothermal reaction using anhydrous sodium silicate. The hydrated sodium silicate was expanded at $370^{\circ}C$ for 30 min. and then pulverized, classified (- 200 mesh) and press-formed. The samples were heat treated at $400{\sim}900^{\circ}C$ for 30 min. in order to study the expansion characteristics depending on heat treatment temperature. A porous body with closed pore was formed above $600^{\circ}C$. The volume expansion ratio and the pore size were increased and the specific gravity was decreased with increasing heat treatment temperature. However, the volume expansion ratio was decreased and the specific gravity was increased above $850^{\circ}C$ due to the softening of the sodium silicate.

Keywords

References

  1. T. Fujiu, "Processing and Properties of Cellular Silica Synthesized by Foaming Sol-Gels," J. Am. Ceram. Soc., 73 [1] 85-92 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb05095.x
  2. J. S. Woyansky and C. E. Scott, "Processing of Porous Ceramics," J. Am. Ceram. Soc. Bull., 71 [11] 1674-80 (1992)
  3. G. Y. Jang, S. R. Kim, K. H. Lee, and J. H. Jung, "Manufacturing Method of Porous Ceramics(in Kor)," J. Kor. Ceram. Soc. Bull., 10 [2] 193-202 (1995)
  4. S. M. Han, D.Y. Shin, and S. K. Kang, "Preparation for Porous Ceramics Using Low Grade Clay(in Kor)," J. Kor. Ceram. Soc., 35 [6] 575-82 (1998)
  5. J. K. Park and J. D. Lee, "Preparation of Porous Inorganic Materials by Foaming Slurry(in Kor)," J. Kor. Ceram. Soc., 35 [12] 1280-88 (1998)
  6. H. N. Choi and S. H. Han, "Effects of Fabrication Variables and Microstructures on the Compressive Strength of Open Cell(in Kor)," J. Kor. Ceram. Soc., 36 [9] 954-61 (1999)
  7. S. H. Ahn, S. Y. Kim, K. P. Yoo, and K. H. Lee, "Manufacturing Porous Transparency Aerogel Using Water Glass(in Kor)," Theories and Applications of Chemical Engineering, 1 [2] 1285-88 (1995)
  8. S. H. Ahn, S. Y. Kim, K. H. Lee, S. Y. Bae, and K. P. Yoo, "Manufacturing Ultraporous Transparent Aerogel from Water Glass by Sol-Gel Processing and Supercritical Drying( in Kor)," HWAHAK KONGHAK, 35 [4] 552-56 (1997)
  9. K. J. Bae, K. H. Kim, and D. J. Seo, "Fabrication & Application of Ultra-Porous Aerogel(in Kor)," Korea Institute of Science and Technology Information, 3-15 (2005)
  10. Y. P. Kong, S. H. Seo, J. H. Kim, and D. S. Suhr, "Characteristics of Porous Ceramics Depending on Water Content of the Water Glass and Heat Treatment Temperature(in Kor)," J. Kor. Ceram. Soc., 42 [10] 691-97 (2005) https://doi.org/10.4191/KCERS.2005.42.10.691