Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Study on the Durability of GFRP Composites in Alkaline Environment(1)

알칼리 환경에 대한 GFRP 복합재료의 내구성에 관한 연구(1)

  • Moon, Yong-Jae (Major of Materials Science and Engineering, Pukyong National University) ;
  • Park, Chang-Ho (Major of Materials Science and Engineering, Pukyong National University) ;
  • Moon, Chang-Kwon (Major of Materials Science and Engineering, Pukyong National University)
  • 문용재 (부경대학교 신소재공학부) ;
  • 박창호 (부경대학교 신소재공학부) ;
  • 문창권 (부경대학교 신소재공학부)
  • Published : 2008.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of alkaline environmental condition on durability of GFRP composites according to additives was investigated. Additives used were polyvinyl alcohol(PVA), kaolin and alumina powder. Weight gains increased with immersion time in all GFRP composites at $80^{\circ}C$. But weight gain of specimen added PVA did not differ through the wlwle immersion time in both tap water and alkaline solution at 20 and $80^{\circ}C$. Tensile strength decreased with immersion time in all environment conditions. Tensile strength of GFRP composites regardless of additives decreased rapidly up to 5 days of immersion and then decreased slowly up to 30 days in alkaline solution environment at $80^{\circ}C$. Weight gains had not. much difference in both tap water and alkaline solution at $20^{\circ}C$. And weight gain of GFRP composites added polyvinyl alcohol had smaller than the others through the whole immersion time in both tap water and alkaline solution at $20^{\circ}C$ and $80^{\circ}C$. Tensile strength of GFRP composites added polyvinyl alcohol had higher than the others through the whole immersion time in both tap water and alkaline solution at $20^{\circ}C$ and $80^{\circ}C$.

Keywords

References

  1. 김형열, 유영준, 박영환, 박종섭, 유영찬, 김긍환 (2004). “GFRP 보강근의 내구특성”, 2004년 대한토목학회 정기학술대회 논문집
  2. 한국건설 기술연구원 (2004). FRP 복합재료 보강재 및 이를 활용한 콘크리트 구조물 건설기술개발, 1차년도 보고서
  3. Abbasi, A. and Hogg, P.J. (2005). “Temperature and Environmental Effects on Glass Fiber Rebar: Modulus, Strength and Interfacial Bond Strength with Concrete”, Composites, Vol 36, No 2, pp 394-404 https://doi.org/10.1016/j.compositesb.2005.01.006
  4. Chin, J.W., Nguyen, T. and Aouadi, K. (1997). “Effect of Environmental Esposure on Fiber-Reinforced Plastic(FRP) Materials Used in Construction”, J. Comp. Tec., Res., Vol 19, pp 205-213 https://doi.org/10.1520/CTR10120J
  5. Gautier, L., Mortaigne, B. and Bellenger, V. (1999). “Interface Damage Study of Hydrothermally Aged Glass-fiber-reinforced Polyester Composites”, Comp. Sci., Tech., Vol 59, No 9, pp 2329 -2337 https://doi.org/10.1016/S0266-3538(99)00085-8
  6. Gellert, E.P. and Turley, D.M. (1999). “Seawater Immersion Aging of Glass-fiber Reinforced Polymer Laminates for Marine Applications”, Composites Part A: Vol 30, pp 1259-1265 https://doi.org/10.1016/S1359-835X(99)00037-8
  7. Karbhari, V.M. and Zhang, S. (2002). “E-Glass/Vinylester Composites in Aqueous Environments-I : Experimental Results”, Appl. Comp. Mater., Vol 10, No 3, pp 19-48 https://doi.org/10.1023/A:1021153315780
  8. Kim, H.Y., Park, Y.H. and Moon, C.K. (2007). “Short-term Durability Test for GFRP Rods under Various Environmental Conditions” Composite Structure, in press
  9. Kim, J.H. and Moon, C.K. (1998 ). “Effect of Long-Term Water Absorption on the Mechanical Properties of E-Glass Fiber/Epoxy Resin Composites”, J. Korean Fiber Soc., Vol 35, No 3, pp 301-308
  10. Lee S.Y., Park, C.H., Kim, H.Y., Kim, Y.H., Seo, S.H., Kim, Y.U., Choi, H.L. and Moon, C.K. (2005). “Durability Test of E-Glass Fibet/Vinylester Resin Composites for Specific Environments”, Textile Science and Engineering, Vol 42, No 6, 2005 pp 405-411
  11. Liao, K., Sehultheisz, C.R. and Hunston. D.L. (1999). “Effects of Environmental Aging on the Properties of Pultruded GFW”, Composites: Part(B), Vol 30, No 9, pp 485-493 https://doi.org/10.1016/S1359-8368(99)00013-X
  12. Miyano, Y., Nakada, M. and Sekine, N. (2004). “Accelerated Testing for Long-term Durability of GFRP Laminates for Marine Use”, Composites: Part(B), Vol 35, No 4, pp 497-502 https://doi.org/10.1016/j.compositesb.2003.11.006
  13. Moon, C.K., Kim, Y.H. and Park, Y.H. (2005). “A Study on the Durability of Glass Fiber Reinforced Plastic Rebars”, J. Kor. Soi. for Power System Eng., Vol 9, No 5, pp 50-56
  14. Moon, C.K. and Goo, J.S. (1997). “Study on the Durability of Fiber Reinforced Plastics by Moisture Aborsoption”, J. Ocean Engneering and Technology, Vol 11, No 5, pp 48-56
  15. Sagi-Mana, D., Narkis, M., Siegmann, A., Joseph, R. and Dodirk, H. (1998). “The Effect of Marine Environment on a Vinyl Ester Resin and Its Highly Filled Particulate Quartz Composites”, J. Appl. Polymer, Sci., Vol 69, No 1, pp 2229-2234 https://doi.org/10.1002/(SICI)1097-4628(19980912)69:11<2229::AID-APP15>3.0.CO;2-U