DOI QR코드

DOI QR Code

Analysis of Radiation Characteristics of Plate-Inserted IBBD Array Antennas

평판이 삽입된 IBBD 배열 안테나의 복사 특성 분석

  • Choi, Hwan-Gi (Dept. of Electronic Engineering, Dankook University) ;
  • Choi, Hak-Keun (Dept. of Electronic Engineering, Dankook University) ;
  • Kim, Do-Kyung (Graduate School of Public Policy and Information Technology, Seoul National University of Technology) ;
  • Jung, Young-Bae (Electronics and Telecommunications Research Institute) ;
  • Jeon, Soon-Ik (Electronics and Telecommunications Research Institute)
  • 최환기 (단국대학교 전자공학과) ;
  • 최학근 (단국대학교 전자공학과) ;
  • 김도경 (서울산업대학교 IT정책전문대학원 산업시스템) ;
  • 정영배 (한국전자통신연구원) ;
  • 전순익 (한국전자통신연구원 안테나기술연구팀)
  • Published : 2008.11.30

Abstract

In this paper, the isolation of the IBBD array antenna is analyzed as functions of the element spacing and the height of the flat plate inserted between array elements for the intelligent antenna system. It is found that the isolation between array elements improves with increasing the array spacing. The array configuration with the plate between the elements is enhanced by about 13 dB more In the isolation than the one without the plate. The plate-inserted $4{\times}4$ elements IBBD array antennas are fabricated and the radiation characteristics are measured and analyzed for the various heights of the plate. It is found that the gain decreases slightly with increasing the height of plate but the shape of radiation pattern does not show a remarkable change.

본 논문에서는 지능형 안테나 시스템을 위하여 IBBD 배열 안테나의 소자 간격 및 소자 사이에 삽입된 평판의 높이에 따른 격리도를 분석하였다. 배열 소자 사이의 격리도는 두 소자 사이의 배열 간격이 증가할수록 향상되고, 두 소자 사이에 평판을 삽입한 경우가 평판이 없는 경우보다 약 13 dB의 격리도가 향상되는 것을 확인하였다. 또, 평판이 삽입된 $4{\times}4$ 소자 IBBD 배열 안테나를 제작하여 평판의 높이에 따른 복사 특성을 측정하고 분석하였다. 평판의 높이가 증가함에 따라 이득이 약간 감소하나, 복사 패턴 형상에는 거의 변화가 없었다.

Keywords

References

  1. 현성현, 조희남, "스마트 안테나 시스템의 개념 및 구성", HY-SDR Research Center, 한양대학교, 2004년 6월
  2. 홍준표, 염재홍, 이효진, "차세대 이동 통신에서의 스마트 안테나 기술", 한국전자파학회지 전자파기술, 13(4), pp. 3-12, 2002월 10월
  3. E. Telatar, "Capacity of multi-antenna gaussian channels", European Transactions on Telecommunications, vol. 10, no. 6, pp. 585-595, Nov. 1999 https://doi.org/10.1002/ett.4460100604
  4. G. J. Foschini, M. J. Gans, "On limits of wireless communications in a fading environment when using multiple antennas", Wireless Personal Communications, vol. 6, pp. 311-335, 1998 https://doi.org/10.1023/A:1008889222784
  5. 민경식, 김동진, 박철근, 문영민, 김영일, "평면 배열 안테나의 소자간 상호 결합 억압 설계", 한국전자파학회논문지, 16(8), pp. 803-809, 2005년 8월
  6. Sung Jin Kim, Yong Suk Lee, Ho Jin Kim, and Hyeon Woo Lee, "Technical review for 3GPP downlink multiple antenna concepts", Telecommunication Review, vol. 12, no. 2, pp. 152-168, Mar. 2002
  7. 환기, 최학근, 정영배, 전순익, "WiBro/ WiMAX 대역 IBBD 배열 안테나의 설계", 한국전자파학회논문지, 19(1), pp. 33-39, 2008년 1월 https://doi.org/10.5515/KJKIEES.2008.19.1.033
  8. B. Edward, D Rees, "A broadband printed dipole with integrated balun", Microwave Journal, pp. 339-344, May 1987
  9. A. A. Eldek, A. Z. Elsherbeni, "Modified printed bow-tie antenna for C and X bands wideband phased array systems", IEEE Trans. Antennas and Propagation, vol. 2B, pp. 429-432, Jul. 2005
  10. C. R. Anderson, S. Krishnamoorthy, and C. G. Rason, "Antenna isolation, wideband multipath propagation measurements, and interference mitigation for on-frequency repeaters", Southeast Con. 2004, Proceeding IEEE, pp. 110-114, Mar. 2004
  11. W. L. Stutzman, G. A. Thiele, Antenna Theory and Design, ch. 3, 7, John Willey, New York, 1981