Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

Fabrication of large-capacity injection mold with the insert core for molding cap

인서트 코어 타입 Cap 성형용 대용량 금형 제작에 관한 연구

  • Jung, Woo-Chul (Molding & Forming Technology R&D Department, Korea Institute of Industrial Technology) ;
  • Heo, Young-Moo (Molding & Forming Technology R&D Department, Korea Institute of Industrial Technology) ;
  • Shin, Gwang-Ho (Molding & Forming Technology R&D Department, Korea Institute of Industrial Technology) ;
  • Yoon, Gil-Sang (Molding & Forming Technology R&D Department, Korea Institute of Industrial Technology) ;
  • Lee, Jeong-Won (Molding & Forming Technology R&D Department, Korea Institute of Industrial Technology)
  • 정우철 (한국생산기술연구원 금형.성형기술연구부) ;
  • 허영무 (한국생산기술연구원 금형.성형기술연구부) ;
  • 신광호 (한국생산기술연구원 금형.성형기술연구부) ;
  • 윤길상 (한국생산기술연구원 금형.성형기술연구부) ;
  • 이정원 (한국생산기술연구원 금형.성형기술연구부)
  • Received : 2008.02.20
  • Accepted : 2008.04.30
  • Published : 2008.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In recent, the demands of household cases and disposable products is increased significantly because a living standard of newly-emerging nations was risen. Therefore, multi-cavity mold and stack mold for the realization of high-productivity have been researched in forefront nations. In this paper, CAE analysis for minimizing the mold core deformation was performed. Finally, 64 cavities injection mold for molding cap which has the insert-type core was fabricated according to the result of CAE analysis.

Keywords