한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제25권4호
  • /
  • Pages.93-99
  • /
  • 2008
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

유압식 클러치 조작기구의 압력맥동저감에 대한 연구

A Study on the Pressure Pulsation Reduction for a Hydraulic Clutch Operating System

  • 이춘태 (신라대학교 자동차기계공학과)
  • 발행 : 2008.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The clutch is a subcomponent of the transmission that is designed to engage and disengage power flow between the engine and the transmission. Recently, the engine power of automobile has been continuously increased because of customer's demand for the bigger one. As the engine power is increased, the vibration transmitted to the hydraulic clutch operating system has been increased. Therefore the demand for the reduction of clutch pedal vibration during the operation of the clutch system has been increased. This paper describes the pressure pulsation reduction characteristics of the damper cylinder which is applied to the hydraulic clutch operating system. And the purpose of this study is to confirm the availability of a simulation model and investigating the test results of hydraulic clutch operating system. The test results are compared with the simulation results. Therefore it may be concluded that the simulation model and test results will be very useful f3r the design of hydraulic clutch damper cylinder.

키워드

참고문헌

  1. Lee, I. Y., "High Speed Computing Method of Unsteady Laminar Pipe Flow by Characteristics Method," KSMME, Vol. 14, No. 1, pp. 20-27, 1990
  2. Lee, J. C., "An Investigation into the State-Space Model for a Hydraulic Attenuator," Journal of the KSPE, Vol. 19, No. 5, pp. 168-175, 2002
  3. Kim, D. T. and Lee, J. M., "Attenuation Characteristics of Fluid-Borne Pressure Ripple in Automotive Power Steering Hydraulic Hoses," Journal of the KSMTE, Vol. 7, No. 3, pp. 22-28, 1998
  4. Lee, J. C., Jeong, Y. S. and Kim, J. H., "Development of performance Analysis Program for a Hydraulic Shimmy Damper of Steering System," Transactions of KSAE, Vol. 12, No. 1, pp. 174-183, 2004
  5. Lee, B. S., "Friction Characteristics of an Hydraulic Cylinder for an Automotive Manual Clutch," Transactions of KSAE, Vol. 14, No. 4, pp. 32-38, 2006
  6. Hastings, M. C. and Chen, C., "Analysis of Tuning Cables for Reduction of Fluidborne Noise in Automotive Power Steering Hydraulic Lines," SAE paper No. 931295, pp. 277-282, 1993
  7. Nagata, S., "Simulation of Resonator Hose," Proceedings of 2nd JHPS International Symposium on Fluid Power, pp. 219-132, 1993
  8. Per, L., "Flow Ripple Reduction in Hydrostatic Transmission by means of Fluid Power Attenuators," Proceedings of 2nd JHPS International Symposium on Fluid Power, pp. 341-348, 1993